![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
VW-powered plane goes down in the Frozen North, which to me is
anywhere other than Southern California. Pilot walks away from it, having just bought one airplane's-worth of education. Now he wants to know why he lost power. I don't know & tell him so. (Kinda hard to do an accident investigation via email). But he keeps pinging on me as the Guru of Last Resort, so powerful my name has been slipped to him under the table after swearing not to reveal his Source. (Eh? Are these people serious?) So I ask him a few questions and based on his answers tell him: 'Sounds like carb ice.' But that's the one thing he's sure it's NOT. No way. Can't be. EVERYONE says so. In fact, his particular engine is (or was) totally ice-proof; didn't even need a carb heat system. Has one of them slide- valve carbs -- no venturi therefore no possibility of icing. And besides, he always uses a 'dryer' in his gas, just like he does in all of his vehicles and he has NEVER had any problems with ice, yada-yada- yada... By now it's obvious I'm dealing with an idiot. I offer the fellow a whiff of reality, pointing out that the 'dryer' was probably a contributing factor since it not only diluted the energy content of his fuel, it contained methanol (ie, wood alcohol) which happens to have an endotherm of about 300 degrees -- twice that of ethyl ethanol (ie, regular alcohol). The probability that ice was a contributing factor to his 'unexplained' loss of power is now about 99% and rising. His response? "That can't be right." And the world's largest kill-file gains another entry. -------------------------------------------------------- Carb and manifold icing is simple physics, clearly spelled out in all the manuals. Even so, you can find messages to this Group from guys BRAGGING about their ice-proof engines, as if the laws of physics don't apply to them. (Which is really kinda scary when you think about it. I mean, these people are allowed to breed and vote and share air- space with normal people... ) Your life is worth something. (Yes, even to me :-) Don't allow yourself to be murdered by all those goods friends with their swell advice. Think for YOURSELF. Reality may be a bitch but so is ignorance. And denial. -R.S.Hoover PS - Gasoline is 'endothermic.' That means it absorbs heat from its surroundings when it changes its state from a liquid to a gas. Straight-run gasoline (ie, without additives) has an endotherm of about 40F, meaning your carb can produce ice cubes on a balmy 72F day. Or even warmer, if the gasoline contains certain additives. Cooler day? Guaranteed ice-generator. Ethanol, that lovely stuff the politicians are pushing, thanks to ADM's lobbyests, has an endotherm of 150F. Mix that with your gas and you have to start thinking ice even here in the desert southwest. But of course, that can't be right :-) - - - - - - - - - - - - - - - - - - - - - - - - I posted the above to Yahoo's AirVW Group about six months and continue to get mail from idiots insisting slide-valve carbs can't ice- up since they don't have a butterfly valve. I've reposted it here in the interest of safety. If you know of someone running a slide-valve carb without any provision for carb heat please give them a nudge toward reality. -RSH |
Thread Tools | |
Display Modes | |
|
|