Shipping a Radar-Advice?

On Fri, 24 Aug 2007 23:05:40 -0700, "RST Engineering"
wrote:

YOu are going to WAY too much trouble. I'd use a virgin cardboard box
about 2x or 3x the volume of the shipment, pack the electronics in a double
wrap of bubble wrap, put a few inches of plastic peanuts in the bottom of
the box, put the heaviest unit in the bottom, fill over the top of that box
with peanuts, put in the lighter of the two units on top of the box, fill
with peanuts and tape the box shut.

You will find that shipping by FedEx air will reduce your probability of
damage to near zero, but I'd still opt for the insurance at the replacement
cost rate.

Do NOT ship UPS. Those *******s will find a way to screw up the process one
way or another, and we ship two to three hundred packages a year.

Good advice for packing. As another data point, our bike shop's
experience is exactly the opposite for the two shipping companies
mentioned.

One other packing tip is to not pack the box overly tight. The
shipping materials need to have a bit of give to do the job. While
it's hard to describe, the box should be full, but not stuffed.
Crumpled newsprint also works amazingly well.