A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

What/how does compression ratio affect an engine?



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #20  
Old December 13th 07, 04:00 AM posted to rec.aviation.homebuilt
Cy Galley
external usenet poster
 
Posts: 48
Default What/how does compression ratio affect an engine?

No extra heat in high Octane. Same hydrocarbon structure is both. Same
BTUs. Only difference is the speed of combustion is controlled so it is
slower in the higher octane to prevent pre-ignition.
--
Cy Galley - Chair,
AirVenture Emergency Aircraft Repair
A 46 Year Service Project of Chapter 75
EAA Safety Programs Editor - TC
New address -
EAA Sport Pilot


"Scott" wrote in message
...
One thing I think "might" be a concern is that burning 100LL (can't get 80
octane avgas these days) in an engine built for 80 octane is the extra
heat. I think valves are most likely to be affected by burning the 100LL
instead of 80. Might be all wet on this, but that's what I've heard and
I'm NOT an engine mechanic...just a user You might try digging in the
Lycoming site and see what they say about 80 vs 100LL...

Scott


wrote:
OK, not cool to reply to my own post, I know. But I just found this
great resource which basically answers all my questions:

http://www.lycoming.textron.com/supp.../key-reprints/

"Lycoming provides helpful information in various publications,
including Lycoming Flyer Key Reprints. Lycoming's Key
Reprints is our effort to continually share our best practices,
key lessons and engines systems knowledge to empower
our customers."

Lower compression = lower chance of preignition = lower octane
required (ie. auto fuel)!
Yes, that would make a difference to the pocket book!

The issue of using auto fuel is addressed in this series also:

"Auto fuel is now being used as a substitute for Grade 80
aviation gasoline under STCs issued by the FAA. Most
major oil companies and engine manufacturers continue
to recommend that aircraft piston engines be operated
only on aviation gasoline. Deterioration of engine and fuel
system parts have been reported in aircraft using auto
fuel. Operators should consider the added risk of using
auto fuel in aircraft. Remember -- a pilot can't pull over
to the side of the road when fuel creates a problem with
the engine."



--
Scott
http://corbenflyer.tripod.com/
Gotta Fly or Gonna Die
Building RV-4 (Super Slow Build Version)



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wing Tape - Does Thickness Affect Performance? ContestID67 Soaring 87 February 1st 07 03:24 PM
Wing Tape - Does Thickness Affect Performance? Charles McLaurin Soaring 2 January 30th 07 06:00 PM
Recent Political Change May Positively Affect GA Larry Dighera Piloting 98 November 13th 06 01:59 AM
How does spar protrusion affect performance Chris Davison Soaring 19 July 13th 04 12:38 AM
Does WiFi affect your choice of FBO? [email protected] General Aviation 8 October 16th 03 07:22 PM


All times are GMT +1. The time now is 05:37 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.