![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#10
|
|||
|
|||
![]()
Dave S wrote:
Jim Logajan wrote: The poster said these were ATC transmissions, not internal company communications. Since ATC doesn't concern itself with weight, balance, or any other flight performance factors, your explanation is almost certainly wrong. So if a flight was ready to push back,.. or number 2 or 3 for takeoff, they wouldnt possibly decline a departure clearance or takeoff clearance in the manner described? The OP described two different transmissions - one from the ATC asking a question and one presumably initiated by the aircraft. I'm still not sure why ATC would ask or be interested in whether the aircraft has the sort of numbers Jay mentions. So you think Jay was almost certainly right and I am almost certainly wrong? That is possible, but I'd like a bit of evidence that that is what the alleged exchanges are all about. Because we all know how people stick to exactly what the AIM and the pilot controller glossary.. right? Um, okay... The use of "have numbers" is mentioned in AIM section 4-1-13: Use of this phrase means that the pilot has received wind, runway, and altimeter information ONLY and the tower does not have to repeat this information. If they didn't have the numbers, as referenced in this manner, ATC could just GIVE em the numbers and clear em anyways.. because we all know that "have numbers" doesnt subsstitute for "having information alpha" or bravo or whatever.. Interesting analysis. I'll wait to see if those who have actual experience with airlines see this thread and can shed light. Prior to the start of this thread I already knew what I thought was the common meaning of "have numbers" - which is even mentioned in the AIM, among other places. Are you saying there is a different meaning in use? If so, is there a reference that mentions it? |
Thread Tools | |
Display Modes | |
|
|