Flyboys?

"Gord Beaman" wrote in message
...
"Dudley Henriques" wrote:


"Gord Beaman" wrote in message
.. .
"Dudley Henriques" wrote:

snort ...you -are- a piece of work indeed...


--Gord.

"Bull ****! This is a constant speed prop. RPM is a
set value. The RPM can be set at 3000 and the
manifold pressure can be anywhere between 15 inches
and 61 inches, and it's the manifold pressure
combined with the set RPM that will determine the
power.....NOT the RPM!!! Are you trying to tell
me that the rotational (energy) of a propeller is
the same at 15 inches as it is at 61?".
-D Henriques

Correct as always!
1. Manifold pressure and rpm equal power
2. The rotational energy of a 24D50 is less at 15 inches than it is at 61
if
the power is brought back past the high rpm limiter.
Simple! Since the limiter is physically impossible to eliminate from the
statement, it's existence and function is assumed.
Is there something about all this you don't understand? :-))
DH


Poor Dudley sigh

I notice that "poor Dudley" doesn't address constant speed prop governor
high rpm limiter does it Gordo? Com'on, you can do better than this can't
you? After all, you have 26 years experience dealing with these things. Go
on; tell me how the seizure momentum is the same at 15 inches as it is at
61?

and oh yes, let's not forget;

"Bull ****! This is a constant speed prop. RPM is a
set value. The RPM can be set at 3000 and the
manifold pressure can be anywhere between 15 inches
and 61 inches, and it's the manifold pressure
combined with the set RPM that will determine the
power.....NOT the RPM!!! Are you trying to tell
me that the rotational (energy) of a propeller is
the same at 15 inches as it is at 61?".
-D Henriques

Waiting for your answer on seizure! :-)