Aviation Sheetmetal Work

"Brian Whatcott" wrote in message
...
wrote:

I would not dream of putting a
machine lathe in an unheated workshop where the ways might attract a
layer of rust.
-----------------------------------------------------------------------------------------

So buy a Flit gun and 5 gallons of kerosene. After using the lathe,
pump up the Flit gun and give the lathe a light coating of kerosene,
then cover it with a piece of canvas that is NOT allowed to touch any
unpainted surface.

-Bob



Which reminds me: in the long, long-ago there was an auto chassis
treatment (back when cars had chassis). The kit was a bottle of wax
dissolved in a solvent and a Flit-gun. Worked like a champ.

(I later verified you can dissolve grated candlewax in most any
petrochemical like kerosene, gasoline, diesel oil, lamp oil whatever, if
you first WARMED the oil.)

Brian W


Back in the middle of the last century, we doped dry-flies in - hold on for
this one -- Ronsonol lighter fluid with parafin household wax dissolved
in it . Hey, it worked.

Flash