Removing Cement From Gelcoart ... Safely

On Apr 4, 6:20*pm, ContestID67 wrote:
As a followup to my original posting, I used "Goof Off" (a mixture of
Xylene and Benzene) and which worked well to soften the adhesive. *I
then used a plastic paint scraper to get most of the now gooey
adhesive off. *Finally I use a 3M Scotch cleaning pad to get that last
bit off. *I was now clean. *I found that the recessed area which had
the map pockets was not jell coated.

I am trying the following idea to add new map pockets. *I found some
industrial 2" wide black velcro at the local fabric store. *I put the
(soft) loop part on the side of the cockpit wall trimmed to fit into
the recess. * Looks really nice. *The idea is that I can then put the
hook side onto anything that I want to mount on the wall. *Pouches of
course but also a small count-up timer, a pen, etc, etc.

*I then went scouting for some pouches. *My first try are the 3-ring
binder pencil/pen nylon pockets found at a office supply store. *They
work just OK, kind of small and don't have the elastic top like the
old pockets. *I will keep searching and may end up sewing my own
pockets.

The nice part about the velcro system is that it is all very versitile
and something I can easily change as I try to find what works best for
me.
in
- John DeRosa

John,

For pockets, you might have a look sun visor storage bags sold at the
auto parts stores like these http://www.autopartsdeal.com/Parts_L...ford/explorer/

Good luck with the Velcro. I've had problems with the part mounted to
the cockpit wall sliding (sliming the wall with gooey) in the heat.
The 3M mushroom lock is stronger and works better the Velcro for
mounting heavier loads (sold at McMaster-Carr).

bumper
MKIV & QV