A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

V-8 powered Seabee



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #19  
Old October 29th 03, 01:41 PM
Corky Scott
external usenet poster
 
Posts: n/a
Default

On Tue, 28 Oct 2003 15:43:58 -0600, Barnyard BOb --
wrote:

The "wannabees, fruits, flakes and fringe folks" would include such
poseurs as Steve Wittman, Roger Mellema, Ray Geschwender, Bernie
Pietenpol, Ray Ward, Jerry Schweitzer and the Reverend Ron Van der
Camp. Some of the afore mentioned people designed auto conversions,
some designed entire airplanes, but all of the flew behind auto
conversions at one time or another. You might recognize a couple of
the names.

Corky (rolling my eyes) Scott

=====================================

Enough of your brand of distortion, Corky.
Cease twisting my words to your agenda.


Pardon? I twisted your words? See below.

I do not consider Steve Wittman, Roger Mellema,
Ray Geschwender, Bernie Pietenpol, Ray Ward,
Jerry Schweitzer and the Reverend Ron Van der
Camp in YOUR class of activity. FAR from it, sir.


Neither do I.

SO...quit flattering yourself right now !!!!!


Here are the words you typed, presumably you meant them: "The
wannabees, fruits, flakes and fringe folks deserve a shot at the
microphone.... but I'll not give them a free pass, even if it is
pointless."

What I pointed out is that better men that me (as you said and to
which I agree) have chosen to fly behind auto engine conversions,
none of whom were flakes or wannabees. What I'm doing is attempting
to follow in their footsteps. I take full responsibility for the path
I'm following.

I'm in the process of fabricating an engine test stand as you read
this. I fully intend to run the engine for many hours (with a prop
installed) prior to installing it in the engine compartment for good.

Corky Scott






 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
human powered flight patrick timony Home Built 10 September 16th 03 03:38 AM
Illusive elastic powered Ornithopter Mike Hindle Home Built 6 September 15th 03 03:32 PM
Pre-Rotator Powered by Compressed Air? nuke Home Built 8 July 30th 03 12:36 PM
Powered Parachute Plans MJC Home Built 4 July 15th 03 07:29 PM
Powered Parachute Plans- correction Cy Galley Home Built 0 July 11th 03 03:43 AM


All times are GMT +1. The time now is 05:05 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.