A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Two die in Glider mid-air



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #23  
Old September 10th 11, 02:33 PM posted to rec.aviation.soaring
John Firth
external usenet poster
 
Posts: 10
Default Two die in Glider mid-air

Ann Welch, a many time steward at WGC s , always warned against setting G
and R tasks due to the risk of collision; one nearly got me; about 3 secs
warning.
If you are running a cloud street, use the L/R lift indications to turn
slightly; no longer will you be a "stationary" speck to the other pilot and
the wing movment will make you easier to see.
A climbing turn is even better.
John F

Although the encoder/altimeter weren't formally checked during the
biannual transponder check, the technician did me a favor and quickly
checked the correspondance at 0, 5000, 10000 and 20000 feet - they
were OK. I also routinely check the transponder altitude reading
against my alitimeter during each flight. So I'm pretty sure that's
all OK. As for your suggestion about chatting with ATC, that didn't
happen.

-John

On Sep 9, 6:48 pm, Darryl Ramm wrote:
John

So my very next thought was has the encoder/altimeter system been

tested
recently?

A standard biannual transponder check for a non-IFR aircraft does not
include a check of the altimeter/altitude encoder system, it just
includes RF tests--a fairly useless throwback to the days of much less
reliable traveling wave tube based transponders. The tests on first
install does include altimeter/encoder tests.

I've seen quite a few owners assume that the encoder/altimeter is being
tested, but unless you've made arrangement with the test provider this
just usually won't be done for these subsequent checks.

A simple test is to compare the altimeter (when set to 29.92"Hg) and
what the TT21 display says for the altitude. But that does not exclude
problems like the static line being disconnected behind the panel or
contaminated with water etc.

If this had happened to me and I'm sure my transponder was working I'd
probably contact the ATC/approach folks and have a chat - this just
should not happen with a TCAS II equipped 737. Unfortunately we don't
have Mode-S RA downlink really used in the USA. When used (like more
widely in Europe) that provides ATC controllers with direct visibility
to RA events in their airspace.

Darryl



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Exporting a glider to/import a glider into Germany Pete Smith[_2_] Soaring 1 August 8th 08 09:33 AM
Glider Model - Blaue Maus- 1922 Wasserkuppe Glider [email protected] Soaring 5 November 19th 06 11:08 PM
shipping glider to NZ-advice on securing glider in trailer November Bravo Soaring 6 November 1st 06 02:05 PM
First Glider Jeff Runciman Soaring 44 October 4th 04 04:58 PM
Looking for first glider Jeff Runciman Soaring 17 September 8th 04 08:29 PM


All times are GMT +1. The time now is 12:52 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.