USB Serial Converters - Reliable one for SN10 and Volkslogger

Hi,

I believe Walt make his own RAM mount for the FLARM remote display.

I sell a very nice one from Butterfly he
http://www.cumulus-soaring.com/butte...-Disp-Rect-RAM

Best Regards,

Paul Remde
Cumulus Soaring, Inc.
_____________________________________

"Bob Gibbons" wrote in message
...
Walt, interesting mount for the display. Looks like the standard
Butterfly backplate and Ram ball, but with a custom mount from the Ram
ball to the siderail.

Can share some information about your display mount installation?

Bob

On Wed, 20 Jun 2012 10:25:31 -0700 (PDT), WaltWX
wrote:

Follow up on PF Brick install:

Photos of Discus 2A PowerFlarm antenna install on panel cover. ADS-B is
forward antenna; FLARM is rear most one.
The hook forward on panel cover is where I locate my SPOT tracker. GPS
antennas are under cover between two PF
top antennas (Volkslogger and PF GPS). ADS-B and FLARM antennas are taped
to a piece of "L" shaped plexiglass
(2x2x3 inches) all velcroed to panel top. Got the plexiglas from Staples
Office and "hacked" it from the original purpose
of displaying 81/2x11inch announcements.
No compass to worry about. Interestingly enough, Discus 2A ops manual
didn't require one nor did the FAA when
I got my experimental certificate.

RAM mounted Butterfly is also visible.

https://dl.dropbox.com/u/463771/MyGl...a_SideView.JPG

https://dl.dropbox.com/u/463771/MyGl...aButterfly.JPG

Walt Rogers, WX