![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#9
|
|||
|
|||
![]()
Flarm blind spots are mostly about the aerial placement: you will not see
anyone directly below or above due to signals not going through fuselage. It works well on the head on case. With the above/below blindspot you would have been alerted earlier as the other glider approached out of blindspot. They are not perfect and need to be used along with good lookout. With Flarm you get a directed lookout which is very effective. Mandatory Flarm in comps and preferably in all gliders/tugs is a small price to pay for the increased safety, but : YOU STILL NEED TO LOOK OUT! Tom It is worth running the range analysis software from the Flarm web site to check how well your aerial is working, albeit this shows the horizontal range. I was very pleased to find a similar tool recently on the LX Nav web site that allows you to do this for a file from an LX8000/9000. I am experimenting with two commercially available L shaped and T shaped aerials that are intended to reduce vertical blind spots at the expense of some horizontal range. So far so good, and that is just with the L aerial mounted inverted under the glare shield. Mike Mike |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Strobe and nav led | CGH | Home Built | 4 | April 9th 10 03:32 AM |
Glider Video Facing Backwards | [email protected] | Soaring | 5 | November 25th 08 02:59 AM |
Some airmen facing longer deployments | Otis Willie | Military Aviation | 0 | January 16th 04 08:34 PM |