A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Stall/spin and ground reference maneuvers



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old March 5th 14, 04:30 PM posted to rec.aviation.soaring
kirk.stant
external usenet poster
 
Posts: 1,260
Default Stall/spin and ground reference maneuvers

On Wednesday, March 5, 2014 7:35:51 AM UTC-6, John Carlyle wrote:

Would you do a circling approach if you were going into a difficult strip, too? Say, a narrow cornfield surrounded by trees. I ask because the Navy pilots I know who fly gliders have reverted to the non-circling approach.


Depends. If low, yes - I'll fly whatever pattern I can to land safely. If I have more time and want to look over the landing area more, then I might fly a higher, longer pattern to give more time to pick the best place to land. Also need to be able to fly bigger patterns when sequencing behind other gliders, so all the skills need to be maintained.

I think it's important to be able to fly a "de-stabilized" (non-constant airspeed) approach in gliders, so that energy can be maintained until late in the approach, and used or gotten rid of as required. Also should be able to fly an approach from just about anywhere around the intended point of landing. Always flying the same pattern into the same airfield pretty much guarantees that your first landout will be exciting! Power pilots are taught to fly "stabilized approaches" because that is how you land a big airplane.. Totally unnecessary in small planes, and IMO downright dangerous in gliders.

As far as watching the ASI, after reaching the TLAR point where I want to start the turn, I look just to the inside (11 or 1 o'clock) when initiating the turn, monitor the ASI for trend (glider is trimmed slightly fast), monitor the yawstring, then check how the turn is progressing, then back to ASI - yawstring - turn, etc until time to roll out. If it's a busy runway I might roll out momentarily to check the extended final, then roll back into the turn - those would be pretty aggressive rolls with lots of speed.

Kirk
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Improved shear/stall-spin alarms KiloKilo[_2_] Soaring 23 June 11th 13 11:55 PM
Another stall spin Jp Stewart Soaring 153 September 14th 12 07:25 PM
Ground Track Maneuvers? Mike Rhodes Piloting 15 September 19th 11 03:45 AM
Stall/ Spin testing the RV-12 cavelamb himself[_4_] Home Built 3 May 14th 08 07:01 PM
Glider Stall Spin Video on YouTube ContestID67 Soaring 13 July 5th 07 08:56 AM


All times are GMT +1. The time now is 10:31 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.