iPhone 6 Plus and iGlide

You don't "dis" it yet you mention every penny you paid...

Dan


I like the method you described for adding a turn point but think that
doing that in turbulence might add a bit of a challenge...

On 3/31/2015 3:39 PM, jfitch wrote:
On Tuesday, March 31, 2015 at 9:05:35 AM UTC-7, Dan Marotta wrote:
I find it hard to believe that you can add a turn point between two
existing turn points with one click using iGlide. Please describe
the process.



With XCSoar on an Android I have to touch the point of interest,
which pops up info on the point, press the right arrow, and then
press "Insert into task". That's 3 clicks.



I admit you have the advantage being able to upload your flight via
the cell phone. With my CNv I have to download the flight to the
USB stick, remove the stick, walk to the hangar, and use the
computer to upload the flight. Or I can simply take my Streak close
enough to the hangar to pickup the wifi signal and upload from
there. These tasks are easily done while sipping a cold beer! ;-D




On 3/30/2015 5:47 PM, jfitch wrote:



On Monday, March 30, 2015 at 4:32:16 PM UTC-7, wrote:


You guys who prefer iglide to Oudie, can you explain what you prefer about it? I suspect that what works best for each of us is the system with which we are most familiar. Personally, I much prefer the (highly customisable) displays on my Oudie IGC to the screen shot linked above, all data is very quick to find and to enter, and files are easy to maintain. I agree the touchscreen is not up to modern mobile phone standards but it is perfectly easy to use.


Hard to know even where to start. iGlide is like a modern iOS or Android app. Oudie (SYM really) is kind of like a Windows 98 app.

The iGlide display is highly configurable and also very non-modal. I can think of very few things that I would like to configure that I can't. File maintenance? You download maps, turnpoints, Flarm, airspace filed directly off the cell (or WiFi) network right into the application. You can upload your flight files same way.

A pet peeve of mine might serve as an example of the interface: From your flight screen on the Oudie, let's say you want to add a turnpoint between this one and that one. How many clicks, searches, typing etc do you have to do? In iGlide, one click, done.

The screen shot that Sean posted is not a great example, zoomed way out and not showing many features. What would you like to configure? What data would you like to see?





--

Dan Marotta
On iGlide, touch and hold for a second on the turnpoint or leg between points you want to modify, then drag to new location, it rubber bands the route and your done. If dragged near a turnpoint or airport, it will snap there.

I'm pretty familiar with XCSoar, used it for a couple of years. I'm not going to dis it - it was worth every penny I paid. However editing tasks on iGlide is far easier, no matter how you do it.

--
Dan Marotta