![]() |
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
On Monday, November 23, 2020 at 2:51:24 PM UTC-8, wrote:
On Monday, November 23, 2020 at 9:45:16 AM UTC-7, Richard Pfiffner wrote: I would guess no on the smaller version as it would require a totally new board design and a new FCC certification. Richard www.craggyaero.com " 1 board. I doubt it will happen for an end of life product." Surely they are not going to discontinue the powerflarm core support? A 2000+ Dollar item should last more than 10 years. I wouldn't mind some upgrade costs but making us buy a completely new unit , well they would lose a lot of support. CH Support will not end. Just no more PowerFlarm Cores will be manufactured. The Core has been replaced by the Fusion. Craggy will continue to offer Service Provider support for the Powerflarm Core http://www.craggyaero.com/powerflarm_fsp.htm Richard www.craggyaero.com |
|
#2
|
|||
|
|||
|
Couple dumb questions:
1 should I or need I upgrade from full licensed CORE to Fusion? Why? 2 is there an upgrade pricing path from CORE to Fusion? Thanks Stephen |
|
#3
|
|||
|
|||
|
On Tuesday, November 24, 2020 at 3:01:06 PM UTC-8, S9 wrote:
Couple dumb questions: 1 should I or need I upgrade from full licensed CORE to Fusion? Why? 2 is there an upgrade pricing path from CORE to Fusion? Thanks Stephen There is an introductory price of $1526 until Jan 31,2021. No upgrade path for a PowerFlarm Core. The Fusion has many new feature including WIFI, enternal range analyzer, connect and cfg with an app on your phone ,etc see brochue for details. http://www.craggyaero.com/PowerFlarm...20Brochure.pdf Richard www.craggyaero.com |
|
#4
|
|||
|
|||
|
On 11/24/20 4:46 PM, Richard Pfiffner wrote:
On Tuesday, November 24, 2020 at 3:01:06 PM UTC-8, S9 wrote: Couple dumb questions: 1 should I or need I upgrade from full licensed CORE to Fusion? Why? 2 is there an upgrade pricing path from CORE to Fusion? Thanks Stephen There is an introductory price of $1526 until Jan 31,2021. No upgrade path for a PowerFlarm Core. The Fusion has many new feature including WIFI, enternal range analyzer, connect and cfg with an app on your phone ,etc see brochue for details. http://www.craggyaero.com/PowerFlarm...20Brochure.pdf Richard www.craggyaero.com I considered getting one to replace my PowerFlarm portable. My wife asked what additional benefit it would provide for $1526. Uhhh... I'm sticking with my portable. Oh, and I don't tell me that transmitting on the B antenna is worth that much. -- Dan 5J |
|
#5
|
|||
|
|||
|
I upgraded to the Core 1.1 because the Flarm website said it can transmit on both antennas.
Color me naïve in my belief that Flarm would be obtaining approval for that capability in North America. |
|
#6
|
|||
|
|||
|
On Tuesday, November 24, 2020 at 8:16:35 PM UTC-5, Dan Marotta wrote:
I considered getting one to replace my PowerFlarm portable. My wife asked what additional benefit it would provide for $1526. Uhhh... I'm sticking with my portable. Oh, and I don't tell me that transmitting on the B antenna is worth that much. Dan 5J Did upgrading the wife come into the conversation? |
|
#7
|
|||
|
|||
|
On 12/2/20 10:38 AM, wrote:
On Tuesday, November 24, 2020 at 8:16:35 PM UTC-5, Dan Marotta wrote: I considered getting one to replace my PowerFlarm portable. My wife asked what additional benefit it would provide for $1526. Uhhh... I'm sticking with my portable. Oh, and I don't tell me that transmitting on the B antenna is worth that much. Dan 5J Did upgrading the wife come into the conversation? Absolutely NOT! This is the gal who once told me that "You can never have enough toys." I have a hangar and three aircraft to prove that. -- Dan 5J |
|
#8
|
|||
|
|||
|
Dan Marotta wrote on 12/2/2020 11:14 AM:
On 12/2/20 10:38 AM, wrote: On Tuesday, November 24, 2020 at 8:16:35 PM UTC-5, Dan Marotta wrote: I considered getting one to replace my PowerFlarm portable. My wife asked what additional benefit it would provide for $1526. Uhhh... I'm sticking with my portable. Oh, and I don't tell me that transmitting on the B antenna is worth that much. Dan 5J Did upgrading the wife come into the conversation? Absolutely NOT!* This is the gal who once told me that "You can never have enough toys."* I have a hangar and three aircraft to prove that. Then you should give her the $1526 :^) -- Eric Greenwell - Washington State, USA (change ".netto" to ".us" to email me) - "A Guide to Self-Launching Sailplane Operation" https://sites.google.com/site/motorg...ad-the-guide-1 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Xian JH-7 pics 2 [5/7] - JH-7B is an advanced version of JH-7A. It has stealthier features compared to JH-7A..jpg (1/1) | Miloch | Aviation Photos | 0 | August 16th 18 03:41 PM |
| PowerFLARM USB 3 cables and ConnectMe to PowerFLARM through V7 | Tim Taylor | Soaring | 20 | June 17th 13 06:56 PM |
| PowerFLARM protocol version 6 | kirk.stant | Soaring | 17 | September 8th 12 11:03 AM |
| PowerFLARM Brick and PowerFLARM Remote Display Manuals Available | Paul Remde | Soaring | 30 | May 26th 12 12:58 AM |
| Any news on the "brick" version of PowerFlarm from the SSA convention? | Andrzej Kobus | Soaring | 7 | February 8th 12 05:29 PM |