Microair M760 Intermittentent Transmit

No luck with the new wiring. And no luck finding the service bulletin.

I've brought the radio home and will be shipping it off for repair and or
updating.


"Dan Marotta" wrote in message
...
Do you have any information on the tech note? I'll be searching the
web...

snip

This is a common symptom of a problem with the socket that the main
processor chip seats in. There was a tech note on how to clear this
symptom by removal, cleaning of contacts, and reinstalling.
A later service bulletin defines a more permanent fix to be done by repair
shops.
UH

Update: Taking off the front panel and pressing the processor chip into its
socket seems to have solved my problem. Thankfully there's no need for
shipping.


"Dan Marotta" wrote in message
...
No luck with the new wiring. And no luck finding the service bulletin.

I've brought the radio home and will be shipping it off for repair and or
updating.


"Dan Marotta" wrote in message
...
Do you have any information on the tech note? I'll be searching the
web...

snip

This is a common symptom of a problem with the socket that the main
processor chip seats in. There was a tech note on how to clear this
symptom by removal, cleaning of contacts, and reinstalling.
A later service bulletin defines a more permanent fix to be done by
repair shops.
UH

On Friday, March 29, 2013 11:30:30 AM UTC-4, Dan Marotta wrote:
Update: Taking off the front panel and pressing the processor chip into its socket seems to have solved my problem. Thankfully there's no need for shipping. "Dan Marotta" wrote in message ... No luck with the new wiring. And no luck finding the service bulletin. I've brought the radio home and will be shipping it off for repair and or updating. "Dan Marotta" wrote in message ... Do you have any information on the tech note? I'll be searching the web... snip This is a common symptom of a problem with the socket that the main processor chip seats in. There was a tech note on how to clear this symptom by removal, cleaning of contacts, and reinstalling. A later service bulletin defines a more permanent fix to be done by repair shops. UH

That is what the service bulletin described.
Problem will eventually return, but this works until you get permannt mod.
UH

I spoke with the man at Microairusa.com and he told me that the problem was
with radios manufactured with the older black socket and not the newer brown
socket. Mine has a brown socket.

It's a much smaller price to remove a couple of screws and push than to pack
and ship the unit (which I will do if the "push" doesn't restore it to life
should the problem resurface).

wrote in message
...
On Friday, March 29, 2013 11:30:30 AM UTC-4, Dan Marotta wrote:
Update: Taking off the front panel and pressing the processor chip into
its socket seems to have solved my problem. Thankfully there's no need for
shipping. "Dan Marotta" wrote in message
... No luck with the new wiring. And no
luck finding the service bulletin. I've brought the radio home and
will be shipping it off for repair and or updating. "Dan Marotta"
wrote in message
... Do you have any information on the
tech note? I'll be searching the web... snip This is a
common symptom of a problem with the socket that the main processor
chip seats in. There was a tech note on how to clear this symptom by
removal, cleaning of contacts, and reinstalling. A later service
bulletin defines a more permanent fix to be done by repair shops. UH


That is what the service bulletin described.
Problem will eventually return, but this works until you get permannt mod.
UH

No luck with the new wiring. And no
luck finding the service bulletin.

Microair removed all the SBs from public access. I think that
happened when ownership changed but not sure of that.

I have several of the SB, including this one, on file and can send you
if you pm me.

Andy

Thanks, Andy, but I'm not sure that will be necessary.

Microair sent me the applicable SB *and* put me in contact with the Rick at
Microairusa.com.

When I bought my glider it had a rather delicate master switch and, since
then, I've added a transponder. I'm wondering if the switch can not handle
the extra current of the transponder and/or is slowly increasing in
resistance and failing. I find that the transmitter works first thing and,
after everything is up and running, it stops modulating.

I'm going to try connecting the radio directly to the battery bus, via fuse,
upstream of the master switch and see if that takes care of the problem.

I've been wanting to replace the single DPDT switch with two SPST switches.
Then I can switch batteries without interrupting power.


"Andy" wrote in message
...
No luck with the new wiring. And no
luck finding the service bulletin.

Microair removed all the SBs from public access. I think that
happened when ownership changed but not sure of that.

I have several of the SB, including this one, on file and can send you
if you pm me.

Andy

Does anyone know the negative effects of connecting the mic ground to power ground instead of pin 2 on this radio? Previous owner wired my glider like that...

I switched the dc input to the radio to the hot side of the switch (on a
terminal strip) and it seems to be working. I'll need a few successful
flights before I call it good. If it fails to modulate again, I'll ship it
to microairusa for repair.


"Dan Marotta" wrote in message
...
Thanks, Andy, but I'm not sure that will be necessary.

Microair sent me the applicable SB *and* put me in contact with the Rick
at Microairusa.com.

When I bought my glider it had a rather delicate master switch and, since
then, I've added a transponder. I'm wondering if the switch can not
handle the extra current of the transponder and/or is slowly increasing in
resistance and failing. I find that the transmitter works first thing
and, after everything is up and running, it stops modulating.

I'm going to try connecting the radio directly to the battery bus, via
fuse, upstream of the master switch and see if that takes care of the
problem.

I've been wanting to replace the single DPDT switch with two SPST
switches. Then I can switch batteries without interrupting power.


"Andy" wrote in message
...
No luck with the new wiring. And no
luck finding the service bulletin.

Microair removed all the SBs from public access. I think that
happened when ownership changed but not sure of that.

I have several of the SB, including this one, on file and can send you
if you pm me.

Andy