If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
At the risk of repeating myself....if you don't understand, ask!!!
Bob Gardner "Andrew Gideon" wrote in message online.com... Departing Lancaster the other day, I received an odd clearance. I was cleared from the airport to the Lancaster VOR, then East Texas VOR... It was that first leg (Lancaster Airport to Lancaster VOR) that confused me. The VOR is on the field. I have little choice but to go past it as a trundle down the runway awaiting rotation speed. So...why that clearance? What is expected of me? What I did was go to the VOR (as I accelerated down the runway {8^) and then proceeded to ETX. But was that right? - Andrew |
#12
|
|||
|
|||
Thank you Bob!...why did it take 11 replies in the thread before anyone
mentioned asking the controller? If he/she gave you the clearance, chances are he/she is in a good position to answer this question. "Bob Gardner" wrote in message ... At the risk of repeating myself....if you don't understand, ask!!! Bob Gardner "Andrew Gideon" wrote in message online.com... Departing Lancaster the other day, I received an odd clearance. I was cleared from the airport to the Lancaster VOR, then East Texas VOR... It was that first leg (Lancaster Airport to Lancaster VOR) that confused me. The VOR is on the field. I have little choice but to go past it as a trundle down the runway awaiting rotation speed. So...why that clearance? What is expected of me? What I did was go to the VOR (as I accelerated down the runway {8^) and then proceeded to ETX. But was that right? - Andrew |
#13
|
|||
|
|||
Brad Z wrote:
Thank you Bob!...why did it take 11 replies in the thread before anyone mentioned asking the controller? If he/she gave you the clearance, chances are he/she is in a good position to answer this question. The weird thing: I did ask. I got no response. Literally. But I was late. Instead of asking clearance delivery (it didn't click a weird while I copied it), I asked the tower just before takeoff. - Andrew |
#14
|
|||
|
|||
In article ne.com,
Andrew Gideon wrote: Brad Z wrote: Thank you Bob!...why did it take 11 replies in the thread before anyone mentioned asking the controller? If he/she gave you the clearance, chances are he/she is in a good position to answer this question. The weird thing: I did ask. I got no response. Literally. But I was late. Instead of asking clearance delivery (it didn't click a weird while I copied it), I asked the tower just before takeoff. - Andrew The tower could probably care less what your clearance is or how you fly it. His only job is to tell approach when you're ready to go and clear you for takeoff when he gets your release. |
#15
|
|||
|
|||
"Andrew Gideon" wrote in message
online.com... Departing Lancaster the other day, I received an odd clearance. I was cleared from the airport to the Lancaster VOR, then East Texas VOR... "Bob Gardner" wrote in message ... At the risk of repeating myself....if you don't understand, ask!!! Reminds me of a guy who posted here many years ago about an incident in Canada. IIRC departing Ottawa he thought was cleared via the Ottawa VOR then enroute fixes, but had a lot of trouble with the accents. He didn't ask for clarification (well not more than a couple of times). So he took off and turned back towards the on-field VOR, only to find that that made ATC really upset. Turns out he had been cleared via the Ottawa *Four* [departure], not the Ottawa *VOR*. (Actually I remembered it with poetic licence but my story's better than reality... ;-) http://groups.google.com/groups?selm...353%40peck.com Julian |
#16
|
|||
|
|||
"Julian Scarfe" wrote in message ... "Andrew Gideon" wrote in message online.com... Departing Lancaster the other day, I received an odd clearance. I was cleared from the airport to the Lancaster VOR, then East Texas VOR... "Bob Gardner" wrote in message ... At the risk of repeating myself....if you don't understand, ask!!! Reminds me of a guy who posted here many years ago about an incident in Canada. The Ottawa VOR is 11 miles off-field, so it wouldn't quite as bizarre as clearance to an on-field navaid. |
#17
|
|||
|
|||
"Icebound" wrote in
news "Julian Scarfe" wrote in message ... "Andrew Gideon" wrote in message online.com... Departing Lancaster the other day, I received an odd clearance. I was cleared from the airport to the Lancaster VOR, then East Texas VOR... "Bob Gardner" wrote in message ... At the risk of repeating myself....if you don't understand, ask!!! Reminds me of a guy who posted here many years ago about an incident in Canada. The Ottawa VOR is 11 miles off-field, so it wouldn't quite as bizarre as clearance to an on-field navaid. If you pass the VOR within 1/2 mile, I would consider that as 'crossing the VOR'. The original poster was close to the VOR when he took off. Hence I don't see a need to return to that VOR after taking off. Just proceed to the next fix. |
#18
|
|||
|
|||
Andrew Sarangan wrote:
If you pass the VOR within 1/2 mile, I would consider that as 'crossing the VOR'. The original poster was close to the VOR when he took off. Hence I don't see a need to return to that VOR after taking off. Just proceed to the next fix. I agree with Andrew, but feel compelled to point out that this is only true for an en-route clearance. If you were flying a DP which said something like "fly runway heading to 1000, left turn direct Lancaster VOR, the proceed on course", that would be a different story. But, the OP didn't say anything about a DP, so I'm assuing that's not what was going on here. |
#19
|
|||
|
|||
Andrew 11/09/2004 5:58:04 am Departing Lancaster the other day, I received an odd clearance. I was cleared from the airport to the Lancaster VOR, then East Texas VOR... It was that first leg (Lancaster Airport to Lancaster VOR) that confused me. The VOR is on the field. I have little choice but to go past it as a trundle down the runway awaiting rotation speed. So...why that clearance? What is expected of me? What I did was go to the VOR (as I accelerated down the runway {8^) and then proceeded to ETX. But was that right? - Andrew Andrew, I would just have made a pilot intercept of the appropriate Lancaster VOR radial as soon as practical. |
#20
|
|||
|
|||
On Fri, 10 Sep 2004 22:52:44 -0400, Andrew Gideon
wrote: zatatime wrote: What I've been taught to be correct is to maintain runway heading until at an altitude that maneuvering won't be a problem (just like any other take off) and then turn and fly direct to the VOR. After station passage continue on your normal route. That was the possibility that I'd considered and rejected. I'd be very interested to know on what you're basing that this is correct, as it's not what I ultimately chose. I think it would depend on the actual clearance received. If you received a "...direct Lancaster VOR..." clearance then it would be proper to overfly the VOR. If you received a different clearance then you may not have to. In my experiences I usually get something like "climb to 2000, direct SBJ, Vsoandso to wherever...." so that is why I said what I said. As far as I know, there's no requirement that a clearance start with "the closest fix to the airport". When I depart CDW to the west, for example, the clearance starts with LANNA. If using a closer fix were necessary, we'd use the closer fix of SBJ...esp. given that LANNA is defined by a radial from SBJ, and there's no other way a /U can reasonably locate LANNA w/o passing by SBJ. This is why there was a delay in my response. I wanted to try to find some documentation to back up what I was taught, and I wasn't home much the last few days. Guess what? There isn't any! The only thing I found was a statement sating the departure point will be to a 'nearby' fix. Nowhere did I find you have to file to the closest fix. This leads me to questions since I obviously either was taught incorrectly, or interpreted what I was taught incorrectly. What is the definition of nearby? Can I file to any VOR or intersection, say, within 20 miles of my departure point? Do I have to actually file starting with a fix, or can I just file from any point on an airway? Given the busy nature of the NY area, what are my odds of getting a clearance using a fix further away? (That last one may just come from experience). A better understanding of this sure will help me pick better routes in the future since I'd always file to the closest, even if I had a crappy route to my destination. As far as your example: How the heck do you get to LANNA if your a /U? I'm thinking your clearances are Radar Vectors to LANNA then.....otherwise, as you state you have to go to SBJ VOR anyway, so why doesn't the clearance start there? More, there's nothing wrong with intercepting an airway at some point not a defined waypoint. I've been told in clearances to fly some heading or radial to intercept an airway plenty of times. So intercepting the airway between the Lancaster VOR and ETX is no great feat. Agreed, I've had similar experiences, but can you file it that way? Finally, turning and flying back toward the VOR on the field puts me into potential conflict with the VFR pattern. I don't know that there were any of those on the day of my visit, but I don't know that there weren't. So I decided to not do what you think is correct. So I might have been wrong. As I wrote, I'd be very interested in something which shows this to be the case (or not to be the case, of course {8^). To know what was right or wrong, as I said, we'd need the actual clearance. Sitting here I can't tell either way, but I am happy to have learned something, and hope anyone with answers to the questions this thread has raised in my head can be discussed. Again - sorry for the delayed response. z |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
No SID in clearance, fly it anyway? | Roy Smith | Instrument Flight Rules | 195 | November 28th 05 10:06 PM |
Clearance: Direct to airport with /U | Judah | Instrument Flight Rules | 8 | February 27th 04 06:02 PM |
Q about lost comms on weird clearance | Paul Tomblin | Instrument Flight Rules | 34 | February 2nd 04 09:11 PM |
Picking up a Clearance Airborne | Brad Z | Instrument Flight Rules | 30 | August 29th 03 01:31 AM |
Big John Bites Dicks (Security Clearance) | Badwater Bill | Home Built | 27 | August 21st 03 12:40 AM |