Part numbers for transponder connector and pins?

**Dave[_16_]** · #1 July 3rd 07, 12:17 AM posted to rec.aviation.homebuilt

Hi all,

Does anybody have the Amp/Molex connector and pin part numbers for the
Narco and King transponders and radios?

Thanks

Dave

**Dave S** · #2 July 3rd 07, 05:26 AM posted to rec.aviation.homebuilt

I dont have them on me right now.. But I do have SOME king and narco
radios with their manuals at the hangar. Perhaps if you list the
specific radios/models in question, I could check any applicable manuals
and see what the part number is for those callouts.

Dave

Dave wrote:

Hi all,

Does anybody have the Amp/Molex connector and pin part numbers for the
Narco and King transponders and radios?

Thanks

Dave

**Darrel Toepfer** · #3 July 3rd 07, 02:46 PM posted to rec.aviation.homebuilt

Dave wrote:

Hi all,

Does anybody have the Amp/Molex connector and pin part numbers for the
Narco and King transponders and radios?

Thanks

Have you tried he

http://www.aeroelectric.com/Installation_Data

**Dave[_16_]** · #4 July 3rd 07, 02:57 PM posted to rec.aviation.homebuilt

Darrel Toepfer wrote:
Dave wrote:

Hi all,

Does anybody have the Amp/Molex connector and pin part numbers for the
Narco and King transponders and radios?

Thanks

Have you tried he

http://www.aeroelectric.com/Installation_Data

Yes I have. Good information but does not have the detail I need to
order connectors and pins from the manufacturer.

Dave, the transponders are as follows:
KT76A
KT78
AT50A

Thanks

Dave

**Dave S** · #5 July 3rd 07, 07:39 PM posted to rec.aviation.homebuilt

Dave wrote:

Yes I have. Good information but does not have the detail I need to
order connectors and pins from the manufacturer.

Dave, the transponders are as follows:
KT76A
KT78
AT50A

Thanks

Dave

Thank you for the reply.. These three models are not in my library..
perhaps they are in someone elses tho.

**El Maximo** · #6 July 4th 07, 04:56 AM posted to rec.aviation.homebuilt

"Dave S" wrote in message
ink.net...
Dave wrote:

Yes I have. Good information but does not have the detail I need to order
connectors and pins from the manufacturer.

Dave, the transponders are as follows:
KT76A
KT78
AT50A

Thanks

Dave

Thank you for the reply.. These three models are not in my library..
perhaps they are in someone elses tho.

I've got a maintenance manual for an AT 50A. Tell me what I'm looking for.

**Dave S** · #7 July 4th 07, 06:33 AM posted to rec.aviation.homebuilt

El Maximo wrote:

I've got a maintenance manual for an AT 50A. Tell me what I'm looking for.

Part number for the black plastic plug and pins.. I'm presuming he's
talkin bout the part thats screwed to the tray, and mates with the
xponder itself. The AMP or MOLEX part numbers...

**Mike[_17_]** · #8 July 4th 07, 02:45 AM posted to rec.aviation.homebuilt

Hi Dave,

I have some for sale on my website. Part numbers are also listed for some of
the items.

http://www.ferrer-aviation.com/installationsupplies.htm

Mike

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tray connector for Narco AT50a part number	[email protected]	Owning	2	February 1st 06 03:01 AM
anyone have the part numbers for the wings of a 1964 Piper 140?	ChrisH	Owning	2	January 20th 05 03:41 PM
does anyone know the part numbers for the wings of a 1964 PA28-140?	ChrisH	Owning	1	January 17th 05 10:54 PM
does anyone know the part numbers for the wings of a 1964 PA28-140?	ChrisH	Owning	0	January 17th 05 09:06 PM
Old Plans, New Part Numbers	[email protected]	Home Built	3	December 16th 04 10:25 AM