If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#31
|
|||
|
|||
ASW 27 Instrument Panel Texture
On Sunday, November 11, 2018 at 10:38:48 AM UTC-5, Matt Herron Jr. wrote:
On Sunday, November 11, 2018 at 5:05:52 AM UTC-8, wrote: Best way to handle this issue is to model the panel and components in full 3D. I have drawn up a lot of my instruments in 3D for my mosquito panel. It would be good if someone hosted a database of 2D and 3D CAD files of all the instruments, panels etc so we didn't need to redraw. I have drawn up the flarm brick, antennae, and several standard instruments that I could share. Chris I will post my 3D database (in .STEP format) to DropBox later today. (I can post in native Solidworks too if anyone is interested) I have a model for a Ventus C panel, and an ASW27b panel. For the 27b I designed in a horizontal plate to mount internal instruments like TT22 encoder, flarm, GPS and FLARM antennas, etc. Matt Please do post your native SW files too. Thanks Chris |
#32
|
|||
|
|||
ASW 27 Instrument Panel Texture
On Sunday, November 11, 2018 at 9:33:07 AM UTC-8, wrote:
On Sunday, November 11, 2018 at 10:38:48 AM UTC-5, Matt Herron Jr. wrote: On Sunday, November 11, 2018 at 5:05:52 AM UTC-8, wrote: Best way to handle this issue is to model the panel and components in full 3D. I have drawn up a lot of my instruments in 3D for my mosquito panel. It would be good if someone hosted a database of 2D and 3D CAD files of all the instruments, panels etc so we didn't need to redraw. I have drawn up the flarm brick, antennae, and several standard instruments that I could share. Chris I will post my 3D database (in .STEP format) to DropBox later today. (I can post in native Solidworks too if anyone is interested) I have a model for a Ventus C panel, and an ASW27b panel. For the 27b I designed in a horizontal plate to mount internal instruments like TT22 encoder, flarm, GPS and FLARM antennas, etc. Matt Please do post your native SW files too. Thanks Chris Here is the link to the dropbox where asw27b panel is stored: https://www.dropbox.com/sh/n1j67ov2a...3qmfA-kHa?dl=0 Let me know if there are any issues. There is a jpeg in there to give you an idea of what you will find in the cad files. Also, you should see the Ventus C panel folder, and a folder that has a popular design I did for wingtip tie-downs on the Ventus. Take off the wingtips, slide in the tie down, flip the lever and you are secure... |
#33
|
|||
|
|||
ASW 27 Instrument Panel Texture
On Sunday, November 11, 2018 at 1:33:46 PM UTC-5, Matt Herron Jr. wrote:
On Sunday, November 11, 2018 at 9:33:07 AM UTC-8, wrote: On Sunday, November 11, 2018 at 10:38:48 AM UTC-5, Matt Herron Jr. wrote: On Sunday, November 11, 2018 at 5:05:52 AM UTC-8, wrote: Best way to handle this issue is to model the panel and components in full 3D. I have drawn up a lot of my instruments in 3D for my mosquito panel. It would be good if someone hosted a database of 2D and 3D CAD files of all the instruments, panels etc so we didn't need to redraw. I have drawn up the flarm brick, antennae, and several standard instruments that I could share. Chris I will post my 3D database (in .STEP format) to DropBox later today. (I can post in native Solidworks too if anyone is interested) I have a model for a Ventus C panel, and an ASW27b panel. For the 27b I designed in a horizontal plate to mount internal instruments like TT22 encoder, flarm, GPS and FLARM antennas, etc. Matt Please do post your native SW files too. Thanks Chris Here is the link to the dropbox where asw27b panel is stored: https://www.dropbox.com/sh/n1j67ov2a...3qmfA-kHa?dl=0 Let me know if there are any issues. There is a jpeg in there to give you an idea of what you will find in the cad files. Also, you should see the Ventus C panel folder, and a folder that has a popular design I did for wingtip tie-downs on the Ventus. Take off the wingtips, slide in the tie down, flip the lever and you are secure... Thanks for posting that. BTW what version of Solidworks is it? Also I could only see the step file and SW files for the 27, not sure if you also wanted to share out the ventus files then you'd need to add another link for those. Chris |
#34
|
|||
|
|||
ASW 27 Instrument Panel Texture
On Sunday, November 11, 2018 at 12:57:56 PM UTC-8, wrote:
On Sunday, November 11, 2018 at 1:33:46 PM UTC-5, Matt Herron Jr. wrote: On Sunday, November 11, 2018 at 9:33:07 AM UTC-8, wrote: On Sunday, November 11, 2018 at 10:38:48 AM UTC-5, Matt Herron Jr. wrote: On Sunday, November 11, 2018 at 5:05:52 AM UTC-8, wrote: Best way to handle this issue is to model the panel and components in full 3D. I have drawn up a lot of my instruments in 3D for my mosquito panel. It would be good if someone hosted a database of 2D and 3D CAD files of all the instruments, panels etc so we didn't need to redraw. I have drawn up the flarm brick, antennae, and several standard instruments that I could share. Chris I will post my 3D database (in .STEP format) to DropBox later today.. (I can post in native Solidworks too if anyone is interested) I have a model for a Ventus C panel, and an ASW27b panel. For the 27b I designed in a horizontal plate to mount internal instruments like TT22 encoder, flarm, GPS and FLARM antennas, etc. Matt Please do post your native SW files too. Thanks Chris Here is the link to the dropbox where asw27b panel is stored: https://www.dropbox.com/sh/n1j67ov2a...3qmfA-kHa?dl=0 Let me know if there are any issues. There is a jpeg in there to give you an idea of what you will find in the cad files. Also, you should see the Ventus C panel folder, and a folder that has a popular design I did for wingtip tie-downs on the Ventus. Take off the wingtips, slide in the tie down, flip the lever and you are secure... Thanks for posting that. BTW what version of Solidworks is it? Also I could only see the step file and SW files for the 27, not sure if you also wanted to share out the ventus files then you'd need to add another link for those. Chris Try this link: https://www.dropbox.com/sh/q8x9qgtum...kuGfcp0La?dl=0 |
#35
|
|||
|
|||
ASW 27 Instrument Panel Texture
On Sunday, November 11, 2018 at 12:57:56 PM UTC-8, wrote:
On Sunday, November 11, 2018 at 1:33:46 PM UTC-5, Matt Herron Jr. wrote: On Sunday, November 11, 2018 at 9:33:07 AM UTC-8, wrote: On Sunday, November 11, 2018 at 10:38:48 AM UTC-5, Matt Herron Jr. wrote: On Sunday, November 11, 2018 at 5:05:52 AM UTC-8, wrote: Best way to handle this issue is to model the panel and components in full 3D. I have drawn up a lot of my instruments in 3D for my mosquito panel. It would be good if someone hosted a database of 2D and 3D CAD files of all the instruments, panels etc so we didn't need to redraw. I have drawn up the flarm brick, antennae, and several standard instruments that I could share. Chris I will post my 3D database (in .STEP format) to DropBox later today.. (I can post in native Solidworks too if anyone is interested) I have a model for a Ventus C panel, and an ASW27b panel. For the 27b I designed in a horizontal plate to mount internal instruments like TT22 encoder, flarm, GPS and FLARM antennas, etc. Matt Please do post your native SW files too. Thanks Chris Here is the link to the dropbox where asw27b panel is stored: https://www.dropbox.com/sh/n1j67ov2a...3qmfA-kHa?dl=0 Let me know if there are any issues. There is a jpeg in there to give you an idea of what you will find in the cad files. Also, you should see the Ventus C panel folder, and a folder that has a popular design I did for wingtip tie-downs on the Ventus. Take off the wingtips, slide in the tie down, flip the lever and you are secure... Thanks for posting that. BTW what version of Solidworks is it? Also I could only see the step file and SW files for the 27, not sure if you also wanted to share out the ventus files then you'd need to add another link for those. Chris Chris, It is a mixture of SW 2012 and SW 2018. I think the Ventus is all 2012. |
#36
|
|||
|
|||
ASW 27 Instrument Panel Texture
Here is a short presentation on refinishing a fiberglass panel on my old DG and another fellow's PIK with faux carbon fiber.
http://aviation.derosaweb.net/presen...s/#carbonfiber - John OHM Ω |
#37
|
|||
|
|||
ASW 27 Instrument Panel Texture
On Monday, 12 November 2018 03:49:12 UTC+2, OHM Ω http://aviation.derosaweb.net wrote:
Here is a short presentation on refinishing a fiberglass panel on my old DG and another fellow's PIK with faux carbon fiber. http://aviation.derosaweb.net/presen...s/#carbonfiber - John OHM Ω Anyone can layup new glass/carbon panel over positive mold in half the work hours described in presentation. When planning panel remember to measure depth of instruments, not only their outline on the panel. Many gliders have structure behind panel that restricts placement. |
#38
|
|||
|
|||
ASW 27 Instrument Panel Texture
Blasphemy!Â* That Ferrari should be red!
While your results looked great, a hydro dip costs a lot less, adds less weight, and no sharp spikes in a crash.Â* The aluminum panel in my Stemme has a hydro dip aluminum look. THIS is what a carbon fiber dip looks like. https://www.dropbox.com/s/qakd33xjipp1dnv/DSC04946-1-2%20Colorado%20Thermal.jpg?dl=0 On 11/11/2018 6:49 PM, OHM Ω http://aviation.derosaweb.net wrote: Here is a short presentation on refinishing a fiberglass panel on my old DG and another fellow's PIK with faux carbon fiber. http://aviation.derosaweb.net/presen...s/#carbonfiber - John OHM Ω -- Dan, 5J |
#39
|
|||
|
|||
ASW 27 Instrument Panel Texture
On Monday, November 12, 2018 at 8:32:57 AM UTC-8, Dan Marotta wrote:
Blasphemy!Â* That Ferrari should be red! While your results looked great, a hydro dip costs a lot less, adds less weight, and no sharp spikes in a crash.Â* The aluminum panel in my Stemme has a hydro dip aluminum look. THIS is what a carbon fiber dip looks like. On 11/11/2018 6:49 PM, OHM Ω http://aviation.derosaweb.net wrote: Here is a short presentation on refinishing a fiberglass panel on my old DG and another fellow's PIK with faux carbon fiber. http://aviation.derosaweb.net/presen...s/#carbonfiber - John OHM Ω -- Dan, 5J Here is another way to manufacture and finish an instrument panel. http://www.craggyaero.com/Panel%20Mf...structions.pdf Richard www.craggyaero.com |
#40
|
|||
|
|||
ASW 27 Instrument Panel Texture
On Sunday, November 11, 2018 at 6:26:39 PM UTC-5, Matt Herron Jr. wrote:
On Sunday, November 11, 2018 at 12:57:56 PM UTC-8, wrote: On Sunday, November 11, 2018 at 1:33:46 PM UTC-5, Matt Herron Jr. wrote: On Sunday, November 11, 2018 at 9:33:07 AM UTC-8, wrote: On Sunday, November 11, 2018 at 10:38:48 AM UTC-5, Matt Herron Jr. wrote: On Sunday, November 11, 2018 at 5:05:52 AM UTC-8, wrote: Best way to handle this issue is to model the panel and components in full 3D. I have drawn up a lot of my instruments in 3D for my mosquito panel. It would be good if someone hosted a database of 2D and 3D CAD files of all the instruments, panels etc so we didn't need to redraw. I have drawn up the flarm brick, antennae, and several standard instruments that I could share. Chris I will post my 3D database (in .STEP format) to DropBox later today. (I can post in native Solidworks too if anyone is interested) I have a model for a Ventus C panel, and an ASW27b panel. For the 27b I designed in a horizontal plate to mount internal instruments like TT22 encoder, flarm, GPS and FLARM antennas, etc. Matt Please do post your native SW files too. Thanks Chris Here is the link to the dropbox where asw27b panel is stored: https://www.dropbox.com/sh/n1j67ov2a...3qmfA-kHa?dl=0 Let me know if there are any issues. There is a jpeg in there to give you an idea of what you will find in the cad files. Also, you should see the Ventus C panel folder, and a folder that has a popular design I did for wingtip tie-downs on the Ventus. Take off the wingtips, slide in the tie down, flip the lever and you are secure... Thanks for posting that. BTW what version of Solidworks is it? Also I could only see the step file and SW files for the 27, not sure if you also wanted to share out the ventus files then you'd need to add another link for those. Chris Chris, It is a mixture of SW 2012 and SW 2018. I think the Ventus is all 2012. Thanks Matt! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
P-39 Instrument-Panel - P-39 Instrument-Panel.jpg ... | Miloch | Aviation Photos | 0 | June 26th 16 01:47 AM |
PIK-20D Instrument panel | Solo | Soaring | 5 | February 15th 09 06:50 PM |
Instrument Panel | ccwillwerth | Home Built | 7 | February 9th 06 02:15 PM |
DG-300 instrument panel | [email protected] | Soaring | 14 | January 29th 06 02:48 PM |
LS 6 b instrument panel | John Brenann | Soaring | 4 | November 19th 05 04:37 AM |