A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

trig tt22 into a standard cirrus, or another Schempp-Hirth Glider



 
 
Thread Tools Display Modes
  #1  
Old September 25th 17, 07:20 PM posted to rec.aviation.soaring
Scott Williams
external usenet poster
 
Posts: 198
Default trig tt22 into a standard cirrus, or another Schempp-Hirth Glider

Hello Forum,
Could anyone willing to share a copy of their 337 documenting the installation of a transponder, maybe battery, and antenna contact me.

I am compiling a preliminary plan for installing a trig tt22 in my Cirrus, and want to have a complete plan of action before I spend. especially an internal antenna location.
Thanks In advance,

Scott, N8915
  #2  
Old September 25th 17, 09:44 PM posted to rec.aviation.soaring
Scott Williams
external usenet poster
 
Posts: 198
Default trig tt22 into a standard cirrus, or another Schempp-Hirth Glider

On Monday, September 25, 2017 at 1:20:47 PM UTC-5, Scott Williams wrote:
Hello Forum,
Could anyone willing to share a copy of their 337 documenting the installation of a transponder, maybe battery, and antenna contact me.

I am compiling a preliminary plan for installing a trig tt22 in my Cirrus, and want to have a complete plan of action before I spend. especially an internal antenna location.
Thanks In advance,

Scott, N8915


I suppose I should also ask, Does the installation of a transponder even require a 337?

Scott.
  #3  
Old September 25th 17, 10:15 PM posted to rec.aviation.soaring
Frank Whiteley
external usenet poster
 
Posts: 2,099
Default trig tt22 into a standard cirrus, or another Schempp-Hirth Glider

On Monday, September 25, 2017 at 2:45:00 PM UTC-6, Scott Williams wrote:
On Monday, September 25, 2017 at 1:20:47 PM UTC-5, Scott Williams wrote:
Hello Forum,
Could anyone willing to share a copy of their 337 documenting the installation of a transponder, maybe battery, and antenna contact me.

I am compiling a preliminary plan for installing a trig tt22 in my Cirrus, and want to have a complete plan of action before I spend. especially an internal antenna location.
Thanks In advance,

Scott, N8915


I suppose I should also ask, Does the installation of a transponder even require a 337?

Scott.


Wouldn't think so since you already have a Mode S Code assignment for that glider. http://registry.faa.gov/aircraftinqu...NumberTxt=8915

Frank
  #4  
Old September 26th 17, 01:39 AM posted to rec.aviation.soaring
Dan Marotta
external usenet poster
 
Posts: 4,601
Default trig tt22 into a standard cirrus, or another Schempp-Hirth Glider

A 337 is for major modifications.Â* I think you can install the
transponder with a mechanic's signature in your log book.Â* You will have
to have the installation tested and certified.

On 9/25/2017 3:15 PM, Frank Whiteley wrote:
On Monday, September 25, 2017 at 2:45:00 PM UTC-6, Scott Williams wrote:
On Monday, September 25, 2017 at 1:20:47 PM UTC-5, Scott Williams wrote:
Hello Forum,
Could anyone willing to share a copy of their 337 documenting the installation of a transponder, maybe battery, and antenna contact me.

I am compiling a preliminary plan for installing a trig tt22 in my Cirrus, and want to have a complete plan of action before I spend. especially an internal antenna location.
Thanks In advance,

Scott, N8915

I suppose I should also ask, Does the installation of a transponder even require a 337?

Scott.

Wouldn't think so since you already have a Mode S Code assignment for that glider. http://registry.faa.gov/aircraftinqu...NumberTxt=8915

Frank


--
Dan, 5J
  #5  
Old September 26th 17, 03:34 AM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 18
Default trig tt22 into a standard cirrus, or another Schempp-Hirth Glider

Scott,

You should be able to log into the SchemppHirth Hirth website and look under the TN/AD page for the Standard Cirrus. There is some information there that talks about transponder installation and antenna location/type. Not sure if the links below will work or not:


https://www.schempp-hirth.com/en/sup...D %5BisAd%5D=


https://www.schempp-hirth.com/en/sup...ller%5D =File
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Garmin GPS 20A with Trig TT22 in Experimental Glider - OK? Paul Remde Soaring 35 December 21st 15 06:17 AM
Bent up wings on Schempp-Hirth and Jonkers glider Jonathan St. Cloud Soaring 16 June 5th 15 12:42 PM
Schempp-Hirth 'Standard Austria' control surface balancing Matt G. Soaring 3 August 3rd 12 03:21 AM
FS Schempp-Hirth Standard Austria Tim Hanke Soaring 0 October 9th 09 02:42 PM
FS: Schempp-Hirth Standard Austria Tim Hanke Soaring 0 June 24th 08 02:47 PM


All times are GMT +1. The time now is 03:36 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.