If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Vendor at Oshkosh ???
Ok, here's my situation. At Osh this year I chatted with a vendor in
the flymarket section that was selling heating pads that epoxy on the bottom of the oil pan. Since I didn't know the exact size of my Ford pans footprint I chose to measure it when I got home and order the right size later. Well, now that it is headed into the teens the beast would like to have it's motor kept warm as it sleeps in its hangar. Of course I seem to have misplaced " read" lost the contact info for the company. I do remember they were in one of the rows with the booth facing east, they were based out of Daytona Beach, and had a rack with various sizes of heaters displayed. Anyone remember this booth and the name of the company ?????? Thanks in advance... Ben www.haaspowerair.com |
#2
|
|||
|
|||
Vendor at Oshkosh ???
On 1 Sep 2006 06:29:59 -0700, "stol" wrote:
Ok, here's my situation. At Osh this year I chatted with a vendor in the flymarket section that was selling heating pads that epoxy on the bottom of the oil pan. Since I didn't know the exact size of my Ford pans footprint I chose to measure it when I got home and order the right size later. Well, now that it is headed into the teens the beast would like to have it's motor kept warm as it sleeps in its hangar. Of course I seem to have misplaced " read" lost the contact info for the company. I do remember they were in one of the rows with the booth facing east, they were based out of Daytona Beach, and had a rack with various sizes of heaters displayed. Anyone remember this booth and the name of the company ?????? http://www.archeat.com/ ? A couple of Canadian outfits sell the same sort of thing, too... http://www.padheaters.com/ http://www.dieselproducts.com/proheat/proheat.html Ron Wanttaja |
#3
|
|||
|
|||
Vendor at Oshkosh ???
("stol" wrote)
Anyone remember this booth and the name of the company ?????? http://www.airventure.org/2006/exhibitors/index.html Good exhibitor info page http://www.airventure.org/2006/exhibitors/fly_market.pdf Fly Market layout http://www.airventure.org/2006/exhibitors/06_exhib_guide.pdf 2006 Exhibitor's Display Layouts and Prices ...$$$ Page 1 is blank. Starts on Page 2 (The $$$'s are on Page 8, in my machine, Page 4 for them) Wow. Anyone have a calculator? g Montblack |
#4
|
|||
|
|||
Vendor at Oshkosh ???
Thanks Ron,,, Archeat is the one I was looking for.
I love this group......... Ben www.haaspowerair.com Ron Wanttaja wrote: On 1 Sep 2006 06:29:59 -0700, "stol" wrote: Ok, here's my situation. At Osh this year I chatted with a vendor in the flymarket section that was selling heating pads that epoxy on the bottom of the oil pan. Since I didn't know the exact size of my Ford pans footprint I chose to measure it when I got home and order the right size later. Well, now that it is headed into the teens the beast would like to have it's motor kept warm as it sleeps in its hangar. Of course I seem to have misplaced " read" lost the contact info for the company. I do remember they were in one of the rows with the booth facing east, they were based out of Daytona Beach, and had a rack with various sizes of heaters displayed. Anyone remember this booth and the name of the company ?????? http://www.archeat.com/ ? A couple of Canadian outfits sell the same sort of thing, too... http://www.padheaters.com/ http://www.dieselproducts.com/proheat/proheat.html Ron Wanttaja |
#5
|
|||
|
|||
Vendor at Oshkosh ???
God Damn, Even Ron Want a Jaw is still here. Hi gang
Where the hell it Ray Jarvis, the scurge of the sky? The Ace of Australia? Ole Ray is most likely sucking up his A-scale salary flying rubber dog **** out of Hong Kong and banging some steward in the bunk on a Cathay 747. What the hell is up Ray Jay? Still pulling the bait-and-switch on your buddies to get a free trip to Aus? Remember Arkaroola, and the Auster. I thought you'd crash it to tell you the truth. Thank God they have FMC's on those 747-400's or you'd never leave the ground in one piece. Did you wreck the RV-8 yet or was it just the RV-6? I always wondered why you converted it to the tricycle from a real airplane with a tailwheel. Had a little bad landing Mate? I got the scoop over at Temora that day we cut in from the Gold Coast back to Bindigo. You were pretty silent about what really happened. **** it up Mate? If you didn't have a massive crew to do everything for you in that 747, I doubt you'd get airborne. You can't even build your own airplanes...just take credit for the RV-6 and the RV-8 after pouring a couple hundred grand into them eh? Is that what happened Ray Jay? That's what everyone at the Bindigo flying club says. JM |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
You're Invited to the 4th Annual Rec.Aviation Oshkosh Party(s)! | Jay Honeck | Piloting | 0 | June 27th 06 04:58 AM |
Oshkosh Reflections | Jay Honeck | Home Built | 54 | August 16th 05 09:24 PM |
Oshkosh Reflections | Jay Honeck | Owning | 44 | August 7th 05 02:31 PM |
Oshkosh Reflections | Jay Honeck | Piloting | 45 | August 7th 05 02:31 PM |
How I got to Oshkosh (long) | Doug | Owning | 2 | August 18th 03 12:05 AM |