A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Signal Transmission of Wi-Fi IP Camera



 
 
Thread Tools Display Modes
  #1  
Old July 6th 12, 10:50 AM
securitycamera2000 securitycamera2000 is offline
Banned
 
First recorded activity by AviationBanter: Nov 2011
Posts: 5
Default Signal Transmission of Wi-Fi IP Camera

A ,CCTV Monitorswifi IP camera is used differently than a wireless camera and has different capabilities. The letters IP represent internet protocol. Representing the signal is transmitted over the internet with a certain protocol. An IP optical device transmits to a router or is connected to the internet by an Ethernet cable connection. This creates the ability to capture a specific area and view the area at a distant place. Differently than a wireless camera that is used within the home to create a system that is portable in nature and viewed on various monitors including the television.
The transmission frequency of a Wi-Fi IP camera is 802.11GHZ. The signal is transmitted to a router or connected to the internet by an Ethernet cable. The IP connection is often referred to as a WIFI connection. A higher signal transmission speed creates a high quality video. A wireless camera transmits to a receiver within a specified distance usually 300 feet and transmits its signal commonly at 2.4GHZ or 5.8GHZ. Many home appliances such as microwaves and land line telephones transmit at these lower frequencies creating occasional interference.
  #2  
Old July 6th 12, 05:32 PM posted to rec.aviation.homebuilt
Steve Hix[_2_]
external usenet poster
 
Posts: 50
Default Signal Transmission of Wi-Fi IP Camera

In article ,
securitycamera2000 wrote:

The transmission frequency of a Wi-Fi IP camera is 802.11GHZ.


Riiiiiiiiiiiiiiiiiiiiiiight.

The signal
is transmitted to a router or connected to the internet by an Ethernet
cable. The IP connection is often referred to as a WIFI connection. A
higher signal transmission speed creates a high quality video. A
wireless camera transmits to a receiver within a specified distance
usually 300 feet and transmits its signal commonly at 2.4GHZ or 5.8GHZ.


But you said above... Which is it?

Never mind.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
radio transmission trouble SD[_2_] Soaring 9 October 15th 09 07:40 AM
troubleshooting com's transmission jan olieslagers[_2_] Home Built 2 April 13th 09 02:39 AM
Camera mounts for small digital camera kestrel254 Soaring 5 August 19th 08 04:03 PM
Subaru flywheel pto without transmission [email protected] Home Built 2 November 26th 05 09:00 AM
Transmission design? Otto Gyro Rotorcraft 1 November 7th 03 05:41 PM


All times are GMT +1. The time now is 08:56 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.