A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » Aviation Images » Aviation Photos
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Cierva Air Horse



 
 
Thread Tools Display Modes
  #1  
Old August 18th 17, 03:06 PM posted to alt.binaries.pictures.aviation
Miloch
external usenet poster
 
Posts: 24,291
Default Cierva Air Horse

https://en.wikipedia.org/wiki/Cierva_Air_Horse

The Cierva W.11 Air Horse was a helicopter developed by the Cierva Autogiro
Company in the United Kingdom during the mid-1940s. The largest helicopter in
the world at the time of its debut, the Air Horse was unusual for using three
rotors mounted on outriggers, and driven by a single engine mounted inside the
fuselage.

The W.11 "Air Horse" heavy lift helicopter was developed by the G & J Weir,
Ltd., Aircraft Department, reconstituted in 1943 as the Cierva Autogiro Company.
The "W" in the designation is a continuation of the autogiro and helicopter
series developed by G & J Weir, Ltd., during the period 1932–1940.

The W.11 was a development of the Weir W.6 dual transverse rotor helicopter. It
is the only helicopter of its type ever built and included three lifting rotors
all turning in the same direction. The adoption of three rotors was due to
concerns over the capability of a single large rotor to generate the required
lift.

Torque balance was provided by slightly inclining each rotor axis to generate
horizontal thrust components to provide anti-torque moments. The three rotor
configuration was foreseen by Belgian helicopter experimenter Nicolas Florine in
his patent of 1926 which presented the aforementioned means for balancing the
reaction on the fuselage of two or more torque driven lifting rotors turning in
the same direction.

A Rolls-Royce Merlin piston engine in the fuselage drove three 47-foot-diameter
(14 m) three-blade rotors mounted on outriggers which projected from the
fuselage. The blades, following the Focke-Achgelis designs, were constructed
from resin-impregnated wood, which provided enormous strength, and were
manufactured by the Glasgow furniture firm H. Morris & Co., Ltd. The W.11 rotor
control system was hydraulically powered. It was the second helicopter ever to
fly using such a system, the first being the Cierva W.9. The landing gear had a
stroke of 5 ft (1.5 m) to cater for high descent rates in the event of engine
failure during low-altitude operations.


Role
Single-engine three-rotor helicopter

Manufacturer
Cierva Autogiro Company

Designer
Cyril Pullin

First flight
7 December 1948

Retired
1950

Primary user
Ministry of Supply

Number built
2

Developed from
Weir W.6

A proposed enlarged development using two Merlins or two Rolls-Royce Dart
turboprops was designated as the W.11T. This was abandoned after the accident
with the first W.11. The death of three long-time colleagues in the accident
prompted financier James G. Weir to decline to provide additional funds since
the Cierva Autogiro Company required ever-increasing investment. As result all
its development contracts were transferred to Saunders Roe. Development of the
W.11 continued for a short time thereafter but was terminated by the British
Government, and the remaining airframe, which had flown for less than 20 hours
in total, was scrapped. Saunders-Roe continued development of the smaller Cierva
W.14 Skeeter, which was a main/tail rotor configuration helicopter.

W.11 G-ALCV made its first flight on 7 December 1948 and was displayed at the
Farnborough Air Show in 1949.

G-ALCV crashed on 13 June 1950, claiming the lives of Alan Marsh (chief test
pilot) John "Jeep" Cable, (Ministry of Supply test pilot), and Joseph K.
Unsworth (flight engineer). The cause of the crash was due to fatigue failure of
a swashplate carrier driving link in the front rotor hub.

The second W.11, G-ALCW, after additional development work, was scrapped about
one year later.

Specifications (W.11)

General characteristics
Crew: 3
Capacity: 800 cubic feet (23 m3) cabin
Length: 88 ft 7 in (27.00 m)
Width: 95 ft 0 in (28.96 m)
Height: 17 ft 9 in (5.41 m)
Empty weight: 12,140 lb (5,507 kg)
Max takeoff weight: 17,500 lb (7,938 kg)
Powerplant: 1 × Rolls-Royce Merlin 24 liquid cooled V-12, 1,620 hp (1,210 kW)
Main rotor diameter: 3× 47 ft (14 m)
Main rotor area: 5,205 sq ft (483.6 m2)

Performance
Maximum speed: 140 mph (225 km/h; 122 kn)
Cruise speed: 95 mph (153 km/h; 83 kn)
Range: 330 mi (287 nmi; 531 km)
Service ceiling: 28,000 ft (8,500 m)





*

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
UK2 VZ724 Cierva AirHorse.jpg Joseph Testagrose Aviation Photos 0 January 11th 16 03:47 PM
UK2 VZ724 Cierva AirHorse.jpg Joseph Testagrose Aviation Photos 0 January 11th 16 02:03 PM
UK2 WA555 Cierva AirHorse Eastleigh.jpg Joseph Testagrose Aviation Photos 0 October 10th 14 01:59 PM
UK2 PX203 Cierva W9 1947-04.jpg Joseph Testagrose Aviation Photos 0 July 8th 14 01:11 PM
UK2 PX203 Cierva W9 1944orLater.jpg Joseph Testagrose Aviation Photos 0 March 8th 12 12:03 PM


All times are GMT +1. The time now is 03:14 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.