A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Piloting
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

New filter - everyone PLEASE add



 
 
Thread Tools Display Modes
  #1  
Old October 12th 06, 12:46 AM posted to rec.aviation.piloting
Morgans[_2_]
external usenet poster
 
Posts: 3,924
Default New filter - everyone PLEASE add

OK, everyone, since some feel they have to respond to Mxsmaniac's posts, how
about being humane to all of us who don't want to read all of the crap that is
following in his wake.

It is easy to make a change to your reply, to help us all out. Simply position
your cursor in the subject bar after the "" in the subject. Then, type MX,
and then continue along your merry way with your post.

This MX will allow every post after yours in the thread to be eliminated, by
people who use a newsreader that can not filter entire threads, without a
marker, but prefer not to read his ignorance and thread hijacking.

This tactic has worked well in other groups. Please be kind to others in this
group and take the time to help us block him.

Thanks, in advance.
--
Jim in NC

  #2  
Old October 12th 06, 02:21 AM posted to rec.aviation.piloting
Newps
external usenet poster
 
Posts: 1,886
Default New filter - everyone PLEASE add



Morgans wrote:

OK, everyone, since some feel they have to respond to Mxsmaniac's
posts, how about being humane to all of us who don't want to read all of
the crap that is following in his wake.


What's to read? Skip any threads from him. It ain't rocket science.



It is easy to make a change to your reply, to help us all out. Simply
position your cursor in the subject bar after the "" in the
subject. Then, type MX, and then continue along your merry way with
your post.

This MX will allow every post after yours in the thread to be
eliminated, by people who use a newsreader that can not filter entire
threads, without a marker, but prefer not to read his ignorance and
thread hijacking.

This tactic has worked well in other groups. Please be kind to others
in this group and take the time to help us block him.



So you are unwilling to just not read the posts so I have to do all the
work? You're a bigger idiot than he is.


  #4  
Old October 12th 06, 02:50 AM posted to rec.aviation.piloting
Morgans[_2_]
external usenet poster
 
Posts: 3,924
Default New filter - everyone PLEASE add


"Newps" wrote

What's to read? Skip any threads from him. It ain't rocket science.


That part is easy. What about the theads that he jumps into (nearly all of
them) and other parts of the thread later down that are still untouched? Do I
just write off any thread that he touches in any way? There will not be much
left to read.

This has been done in other groups. It works very well. You get to keep
reading all of the nonsense, and I can read the parts that he has not polluted.
We all win.

So you are unwilling to just not read the posts so I have to do all the work?


ALL of the work? A mouse click, a shift followed by two letters and a tab or
another mouse click. Five actions, so even if you are a hunt and peck typer,
that would be all of 5 seconds. That does not sound like much work to me. If
it is for you, I feel sorry for you. If it was done by someone further up in
the that part of the thread, you don't have to do a single thing.

You're a bigger idiot than he is.


Because I don't want to see this group torn apart? How does that make me an
idiot, at that, a *bigger* idiot?

Have you counted the number of other people begging everyone else to quit
responding to this jerk? The number of posts? If everyone were to do this,
that would all stop.

I think you must be the idiot for not realizing this.

If everyone will not stop responding, then this solution is the next best thing,
for the health of the group.
--
Jim in NC



  #5  
Old October 12th 06, 02:52 AM posted to rec.aviation.piloting
Morgans[_2_]
external usenet poster
 
Posts: 3,924
Default New filter - everyone PLEASE add


"Dave Doe" wrote

**** off Noddy.

User added to Bozo bin.


Oh, that really hurts, coming from somebody with a nobody name.

Please feel free to ignore me. I know I will do the same for you.
--
Jim in NC
  #6  
Old October 12th 06, 03:04 AM posted to rec.aviation.piloting
Peter Duniho
external usenet poster
 
Posts: 774
Default New filter - everyone PLEASE add

"Morgans" wrote in message
...
[...]
If everyone will not stop responding, then this solution is the
next best thing, for the health of the group.


Anyone who insists on continuing to reply to his posts is not going to
bother filtering him out. Your proposed "solution" isn't any better than
just suggesting that people not reply to his posts.


  #7  
Old October 12th 06, 08:25 AM posted to rec.aviation.piloting
Morgans[_2_]
external usenet poster
 
Posts: 3,924
Default New filter - everyone PLEASE add


"Peter Duniho" wrote

Anyone who insists on continuing to reply to his posts is not going to bother
filtering him out. Your proposed "solution" isn't any better than just
suggesting that people not reply to his posts.


Actually, that is not true. It really does work, and work quite well. Also,
they are not filtering it out, but adding to the subject. It is still up to the
reader that does not want to read the post to write a filtering rule based on
the added MX or whatever.

Over in the rec homebuilt group, there are at least 5 filter triggers like that,
and most everyone is polite enough to use them, and add them, when needed.

The problem is that there will always be somebody to respond to trolls,
unfortunately. If they would only be as kind to add the MX, or whatever when
they do, nobody that does not want to read that portion of the posts will ever
have to complain about it again.

We really ought to give it a try. It does work.
--
Jim in NC

  #8  
Old October 12th 06, 08:37 AM posted to rec.aviation.piloting
Peter Duniho
external usenet poster
 
Posts: 774
Default New filter - everyone PLEASE add

"Morgans" wrote in message
...
Actually, that is not true. It really does work, and work quite well.
Also, they are not filtering it out, but adding to the subject. It is
still up
to the reader that does not want to read the post to write a filtering
rule
based on the added MX or whatever.


Well, good luck with that.

I've yet to see any thread where there's been a significant "contribution"
(such as it is) from him, and yet where I saw any need to continue reading
the thread. I just junk the whole thread when he starts a thread down the
toilet.

Frankly, now that I've stopped trying to talk any sense into the guy, I've
found his presence to be hardly disruptive at all.

But, if you think you can get people to consistently change the subject just
so you can exercise a filter, more power to you. Far be it from me to try
to discourage anyone from following along.

Pete


  #9  
Old October 12th 06, 12:54 PM posted to rec.aviation.piloting
Denny
external usenet poster
 
Posts: 562
Default New filter - everyone PLEASE add

MX Z Z Z ZOOOOOOM

denny rotflmao

  #10  
Old October 12th 06, 02:23 PM posted to rec.aviation.piloting
Michael Houghton
external usenet poster
 
Posts: 22
Default New filter - everyone PLEASE add

Howdy!

In article ,
Morgans wrote:
OK, everyone, since some feel they have to respond to Mxsmaniac's posts, how
about being humane to all of us who don't want to read all of the crap that is
following in his wake.

It is easy to make a change to your reply, to help us all out. Simply position
your cursor in the subject bar after the "" in the subject. Then, type MX,
and then continue along your merry way with your post.

This MX will allow every post after yours in the thread to be eliminated, by
people who use a newsreader that can not filter entire threads, without a
marker, but prefer not to read his ignorance and thread hijacking.

This tactic has worked well in other groups. Please be kind to others in this
group and take the time to help us block him.

That "advice" ASSumes a lot about my newsreader.

A lot that is utterly wrong.

If you are advocating putting Mxsmaniac into a killfile, why
not come right out and say so using the appropriate terminology.

I think it would be more useful for people to tag their
replies to Skylune with 'SKY'. Then I could more easily filter
out replies to his rabid ranting ridiculousness. Mxsmaniac, by
comparison, merely shows dogged ignorance -- something that
*might* be treatable. I'm willing to stipulate that Mxsmaniac's
determination is impressive, even.

I would hope that your newsreader has some sort of killfile type
function. If not, perhaps you need to reconsider the tools you
use to read newsgroups. I'm using a tool that has been around
for a long time, and it's had that capability since forever.

yours,
Michael


--
Michael and MJ Houghton | Herveus d'Ormonde and Megan O'Donnelly
| White Wolf and the Phoenix narrowwares
Bowie, MD, USA |
http://whitewolfandphoenix.com
Proud member of the SCA Internet Whitewash Squad
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
directional gyro inlet filter dlevy Owning 2 October 9th 06 03:00 PM
Pirep: SacSkyRanch Oil Filter Can Cutter Jim Burns Owning 3 January 1st 06 07:57 AM
Century IIIB Rate Filter Parts and Schematics PilotMike2004 Owning 1 January 10th 05 01:01 PM
Filter element for Frantz filter Philippe Owning 1 April 20th 04 08:23 PM
where exactly to put the noise filter Dico Reyers Owning 25 February 25th 04 04:21 AM


All times are GMT +1. The time now is 01:16 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.