A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Pober Junior Ace Accident



 
 
Thread Tools Display Modes
  #1  
Old November 8th 05, 12:05 PM
Scott
external usenet poster
 
Posts: n/a
Default Pober Junior Ace Accident

What a bummer, Glad nobody got hurt, maybe a testament to the aircraft
design. Ken Terrio's airplane was beautiful it was the 2003 Plans
built grand
champion. Hope Ken can get it all back together. Here is the NTSB
preliminary.





NTSB Identification: NYC05LA139
14 CFR Part 91: General Aviation
Accident occurred Saturday, August 27, 2005 in Oxford, CT
Aircraft: Terrio Pober Jr Ace, registration: N37KT
Injuries: 1 Uninjured.

This is preliminary information, subject to change, and may contain
errors.
Any errors in this report will be corrected when the final report

has been
completed.

On August 27, 2005, at 1315 eastern daylight time, an amateur built

Pober
Jr
Ace, N37KT, was substantially damaged during a forced landing

following a
loss of engine power near Oxford, Connecticut. The certificated private
pilot was not injured. Visual meteorological conditions prevailed and no
flight plan was filed for the flight which originated at the Albany
International Airport (ALB), Albany, New York, and was destined for the
Goodspeed Airport (42B), East Haddam, Connecticut. The personal

flight was
conducted under 14 CFR Part 91.

According to the pilot, he was flying at an altitude of 3,500 feet, just
northeast of Waterbury-Oxford (OXC) airspace when he observed a loss of
engine oil pressure, followed by a "clicking" sound coming from the
engine.
The propeller then stopped turning, and the pilot immediately turned
toward
the OXC airport for an emergency landing. He then realized that he

did not
have the gliding distance to make the airport, and selected an open corn
field to perform a forced landing. Upon touchdown, the airplane bounced
"hard" and continued down the sloped field, until it impacted trees.

Examination of the engine by a Federal Aviation Administration (FAA)
inspector revealed a fractured connecting rod bearing in the number 3
cylinder.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
AOPA Stall/Spin Study -- Stowell's Review (8,000 words) Rich Stowell Aerobatics 28 January 2nd 09 02:26 PM
Most reliable homebuilt helicopter? tom pettit Home Built 35 September 29th 05 02:24 PM
Mini-500 Accident Analysis Dennis Fetters Rotorcraft 16 September 3rd 05 11:35 AM
Nearly had my life terminated today Michelle P Piloting 11 September 3rd 05 02:37 AM
AOPA Stall/Spin Study -- Stowell's Review (8,000 words) Rich Stowell Piloting 25 September 11th 03 01:27 PM


All times are GMT +1. The time now is 05:32 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.