Stryker/C-130 Pics

"Thomas Schoene" wrote in message k.net...
"Kevin Brooks" wrote in message
om
Think of it as another system using the same
concept as current spaced armor and ceramic composites, which also
hinge upon diffusing the jet over a larger area, a;beit one with
extremely fine tolerances for successful initiation.

As I understand it, the system actually self-initiates -- the plasma jet
actually bridged the gap and shorts out the capacitor on impact. No timing
mechanism required.

OK, I can see where that would complete the circuit, though now you
are left with a plate capacitor with a hole in one plate, if I am
understanding this properly--how well is it going to work a second
time? How much power is required? How are other systems to be
protected from your own protective capacitance discharge? Sorry, but
this does not sound like the most promising of developments against
the HEAT round, and I can't see how it would be that effective against
a kinetic round, so is this another wonderful research project that
sees little opportunity of realistic fielding?


Again, you seem to have the defeat mechanism wrong, from the way I
read it. And pray tell what this wonderful system does to a shaped
charge using a non-conducting liner (glass (which is a liquid in its
customary "solid" state, as we know it...) is a not uncommon alternate
liner in place of the usual copper)?

In the very heated, very compressed sonditions of a shaped charge plasma
jet, I suspect you'll find that even glass is conductive.

Mea culpa. You are right, Tom; I was a bit surprised to find that this
is true for glass, which apparently has some level of sodium in its
structure.

Brooks