If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
ET wrote:
Dave S wrote in k.net: Ross and ET.. Where do you guys call home base? I wouldnt mind trying to catch up with "local" guys from time to time. Either one of you heard of the Gulf Coast Wings Weekend? Its comin up June 4 and 5. http://www.gulfwings.org/ Dave replace nospam with earthlink Well, I'm still a pilot wannabee.... but when I build my plane I will base it at Zuehl airfield.. ( www.zuehlfield.com ) This was my first fly-in, so I can't help you much on others, but Gaveston (the home of the gulfwings fly-in) is a beautiful area. -- ET "A common mistake people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."---- Douglas Adams Hi ET. I live at Zuehl. Have we met under some other names? Richard Lamb |
#12
|
|||
|
|||
KSWI, Sherman Municipal Airport.
ET wrote: Dave S wrote in k.net: Ross and ET.. Where do you guys call home base? I wouldnt mind trying to catch up with "local" guys from time to time. Either one of you heard of the Gulf Coast Wings Weekend? Its comin up June 4 and 5. http://www.gulfwings.org/ Dave replace nospam with earthlink Well, I'm still a pilot wannabee.... but when I build my plane I will base it at Zuehl airfield.. ( www.zuehlfield.com ) This was my first fly-in, so I can't help you much on others, but Gaveston (the home of the gulfwings fly-in) is a beautiful area. -- ET "A common mistake people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."---- Douglas Adams |
#13
|
|||
|
|||
Richard Lamb wrote in
: Hi ET. I live at Zuehl. Have we met under some other names? Richard Lamb No, not yet.... I've only met 2 people out at Zuehl, one is a AI with an Ercoupe, and one is building a Zodiac (Leo G.). Since I'm still in the dreaming stage as far as both flying and building, that's about as far as I've got.... Tony, I believe is the AI's name... hell of a nice guy, let me fly his Ercoupe awhile back (his hands were in his lap MOST of the time..), my first take off and landing(s) at the controls! What do you fly??? If you wish to contact me off list.... tx_brew (at) yahoo (dot) com I'd love to come out and see your place and plane(s) Leo told me of a Lady CFI out at Zuehl that trains in taildraggers, I keep meaning to drive back out there and try to find her.... One of these days I'm gonna start those flying lessons grin and I believe training with an independent may be more economical, especially since Zuehl is the closest airport to me (I live in Schertz). BTW why did the Zuehl fly-in get cancelled????? -- ET "A common mistake people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."---- Douglas Adams |
#14
|
|||
|
|||
ET wrote:
Richard Lamb wrote in : Hi ET. I live at Zuehl. Have we met under some other names? Richard Lamb No, not yet.... I've only met 2 people out at Zuehl, one is a AI with an Ercoupe, and one is building a Zodiac (Leo G.). Since I'm still in the dreaming stage as far as both flying and building, that's about as far as I've got.... Tony, I believe is the AI's name... hell of a nice guy, let me fly his Ercoupe awhile back (his hands were in his lap MOST of the time..), my first take off and landing(s) at the controls! What do you fly??? If you wish to contact me off list.... tx_brew (at) yahoo (dot) com I'd love to come out and see your place and plane(s) Leo told me of a Lady CFI out at Zuehl that trains in taildraggers, I keep meaning to drive back out there and try to find her.... One of these days I'm gonna start those flying lessons grin and I believe training with an independent may be more economical, especially since Zuehl is the closest airport to me (I live in Schertz). BTW why did the Zuehl fly-in get cancelled????? -- ET "A common mistake people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."---- Douglas Adams Well then, howdy, future neighbor! Leo is my next door neighbor. We are hanging the other wing in his Zenith - tonight maybe? Tony (the ErCoup guy) and his wife have hit the road for cooler climes (they think South Texas summers are too hot. Huh.). The Lady CFI has to be Diane. I've flown with her. She's a good stick. Very calm, very smooth. I think she's probably a great primary instructor. She has a 150 and a 7AC, so you have some options that most commercial operations don't offer. The fly-in will get straightened out, but the basic issue is insurance - now that the property owners association has control (and responsibility for) the runway and such. As for me, I'm just getting my new parasol up and flying. http://home.earthlink.net/~n6228l/ (see the "Lifting off" post last weekend?) I keep funy hours. I'm open Saturday and Sunday afternoon. Drop in and visit sometime. Richard |
#15
|
|||
|
|||
Richard Lamb wrote...
As for me, I'm just getting my new parasol up and flying. http://home.earthlink.net/~n6228l/ Sure is a pretty airplane. Dave 'green' Hyde |
#16
|
|||
|
|||
nauga wrote:
Richard Lamb wrote... As for me, I'm just getting my new parasol up and flying. http://home.earthlink.net/~n6228l/ Sure is a pretty airplane. Dave 'green' Hyde Why thank you, Dave. It's my 'red' phase. Unfortunately, the cowling is still 'in work' for final paint. (have I mentioned lately that I _hate_ painting?) I had the cowling presentable, but it got blown around in the prop wash one day and got all skinned up. (no comment) Then I learned a lot (more) about paint compatibility (yeah, the hard way - did I mention that I specifically hate enamel?) and finally stripped the whole cowl back to bare glass. Leo had some paint stripper that looked like good steak sauce. That took off everything in one fell swoop. But it opened up the glass surface something horrid. I got it smoothed out (I heart my wet sander), then primed it inside and out with Epibond. (I heart Epibond too!) Think of it as a poor man's gel coat. Next comes a sandable primer coat, final surface smoothing, and (enamel again?) Ok. There are obviously lessons here. I'll work on it... Richard |
#17
|
|||
|
|||
Richard Lamb wrote in
: The Lady CFI has to be Diane. I've flown with her. She's a good stick. Very calm, very smooth. I think she's probably a great primary instructor. She has a 150 and a 7AC, so you have some options that most commercial operations don't offer. The fly-in will get straightened out, but the basic issue is insurance - now that the property owners association has control (and responsibility for) the runway and such. As for me, I'm just getting my new parasol up and flying. http://home.earthlink.net/~n6228l/ (see the "Lifting off" post last weekend?) I keep funy hours. I'm open Saturday and Sunday afternoon. Drop in and visit sometime. Richard Small world eh?? I'll have to do that some saturday or Sunday afternoon.... If you don't mind, see if you can get contact information for Diane (phone# or email or something), and email it to me privately at tx_brew (at) yahoo (dot) com. (the underscore character "_" IS part of the email address.) Thanks -- ET "A common mistake people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."---- Douglas Adams |
#18
|
|||
|
|||
ET wrote:
Richard Lamb wrote in : The Lady CFI has to be Diane. I've flown with her. She's a good stick. Very calm, very smooth. I think she's probably a great primary instructor. She has a 150 and a 7AC, so you have some options that most commercial operations don't offer. The fly-in will get straightened out, but the basic issue is insurance - now that the property owners association has control (and responsibility for) the runway and such. As for me, I'm just getting my new parasol up and flying. http://home.earthlink.net/~n6228l/ (see the "Lifting off" post last weekend?) I keep funy hours. I'm open Saturday and Sunday afternoon. Drop in and visit sometime. Richard Small world eh?? I'll have to do that some saturday or Sunday afternoon.... If you don't mind, see if you can get contact information for Diane (phone# or email or something), and email it to me privately at tx_brew (at) yahoo (dot) com. (the underscore character "_" IS part of the email address.) Thanks -- ET "A common mistake people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."---- Douglas Adams Done... |
#19
|
|||
|
|||
Dave,
Thank you for the report. I have forwarded it to the officers of SWRFI (my father is the Treasurer and I assist him in his duties at the show). Reading it I found your passenger's names eerily, creepily surreal. My name is Russell, and my wife is Jen. And I was at SWRFI. DOO-DEE-DOO-DUM DOO-DEE-DOO-DUM. Russell Kent |
#20
|
|||
|
|||
Wow I was there, and saw those cherokee's as well. I swear the left
wingtip of the following bird was barely a foot off the ground as he appeared to vear right to avoid the bird in front. I believe they were told to land one short and one long, but obviously the one landing long thought that 100 feet from the numbers was long enough..... I think we'll use this example as reason enough in the future to do the colored dots thing a la Oshkosh. Russell Kent |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
First Two Aero Lessons This Weekend (Long) | David B. Cole | Aerobatics | 12 | December 3rd 04 01:18 AM |
Simpy One of Many Stories of a Time Not So Long Ago | Badwater Bill | Home Built | 40 | March 16th 04 06:35 PM |
Jon Johanson..Long delete if not interested | Jerry Springer | Home Built | 0 | December 21st 03 05:55 PM |
Long EZ Dwgs | 1engineer | Home Built | 0 | August 28th 03 06:14 AM |
Wanted - Long EZ and Q2 plans | 1engineer | Home Built | 41 | August 26th 03 05:31 PM |