A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Jantar Standard Canopy



 
 
Thread Tools Display Modes
  #1  
Old June 25th 09, 03:11 PM posted to rec.aviation.soaring
jmarc
external usenet poster
 
Posts: 7
Default Jantar Standard Canopy

Is that possible to buy somewhere only the plastic
part of the Jantar canopy? I should probably take a look at
the "ceebaileys" like the previous post said for the Blanik.

But I think it will not be available that way. So I post here to know
if anybody have very good condition Jantar canopy used, to sell..?

jmarc...
Ads
  #2  
Old June 25th 09, 05:08 PM posted to rec.aviation.soaring
Henryk Birecki
external usenet poster
 
Posts: 49
Default Jantar Standard Canopy

I do not have information, but you may want to specify which Jantar
Std. 3 has different type of canopy than 2 and I am not sure if one
from 1 fits 2.

Henryk Birecki


"jmarc" wrote:

Is that possible to buy somewhere only the plastic
part of the Jantar canopy? I should probably take a look at
the "ceebaileys" like the previous post said for the Blanik.

But I think it will not be available that way. So I post here to know
if anybody have very good condition Jantar canopy used, to sell..?

jmarc...


  #3  
Old June 25th 09, 08:04 PM posted to rec.aviation.soaring
jmarc
external usenet poster
 
Posts: 7
Default Jantar Standard Canopy

Good point! It is a Jantar Std 2 ...

jmarc..

"Henryk Birecki" wrote in message
...
I do not have information, but you may want to specify which Jantar
Std. 3 has different type of canopy than 2 and I am not sure if one
from 1 fits 2.

Henryk Birecki


"jmarc" wrote:

Is that possible to buy somewhere only the plastic
part of the Jantar canopy? I should probably take a look at
the "ceebaileys" like the previous post said for the Blanik.

But I think it will not be available that way. So I post here to know
if anybody have very good condition Jantar canopy used, to sell..?

jmarc...




  #4  
Old June 25th 09, 08:19 PM posted to rec.aviation.soaring
sisu1a
external usenet poster
 
Posts: 569
Default Jantar Standard Canopy

But I think it will not be available that way. *So I post here to
know
if anybody have very good condition Jantar canopy used, to sell..?


Since it's a Std 2, now you should specify whether you need the front,
rear, or both sections since it's a 2 piece'r... There is a canopy
part that may be able to be fit for the rear section on wings & wheels
if you scroll down the page some...

http://www.wingsandwheels.com/Used%20Parts.htm

I know where a good canopy mounted to a frame for a Std 3 is should
you want to upgrade to a single piece canopy (there's already a few
2's out there with this conversion), although that's a 337 surgery as
opposed to mere maintenance... it sure is a nice view though!

-Paul
  #5  
Old June 26th 09, 09:10 PM posted to rec.aviation.soaring
jmarc
external usenet poster
 
Posts: 7
Default Jantar Standard Canopy

You are right again. We need only the rear part.
I took a look at the wings & wheels site. But not sure
if I saw the one you talked about! Is seems to be
a one piece full canopy without the little door.. So
I will get more informations from the dealer..

But the best way is to find out

So, lurking on the newgroup, I learn about the MecaPlex
company. They seems to be the best place to get a
replacement canopy. Maybe they built original parts for
glider constructors, too! But it might be a bit pricy.

The best might be

So if nobody here on the net have good condition used
canopy, I probably contact them to know how much it
will cost for the plastic part (hoping the door will be





"sisu1a" wrote in message
...
But I think it will not be available that way. So I post here to

know
if anybody have very good condition Jantar canopy used, to sell..?


Since it's a Std 2, now you should specify whether you need the front,
rear, or both sections since it's a 2 piece'r... There is a canopy
part that may be able to be fit for the rear section on wings & wheels
if you scroll down the page some...

http://www.wingsandwheels.com/Used%20Parts.htm

I know where a good canopy mounted to a frame for a Std 3 is should
you want to upgrade to a single piece canopy (there's already a few
2's out there with this conversion), although that's a 337 surgery as
opposed to mere maintenance... it sure is a nice view though!

-Paul



  #6  
Old June 26th 09, 09:14 PM posted to rec.aviation.soaring
jmarc
external usenet poster
 
Posts: 7
Default Jantar Standard Canopy

You are right again. We need only the rear part!

I took a look at the wings & wheels site. But not sure
if I saw the one you talked about! Is seems to be
a one piece full canopy without the little door.. So
I will get more informations from the dealer..

Our Jantar is a SZD48-1 Standard 2
Once again, the best way is to find out there a used canopy
in pretty good condition..

So, lurking on the newgroup, I learn about the MecaPlex
company. They seems to be the best place to get a
replacement canopy. Maybe they built original parts for
glider constructors, too! But it might be a bit pricy.

jmarc..

"sisu1a" wrote in message
...
But I think it will not be available that way. So I post here to

know
if anybody have very good condition Jantar canopy used, to sell..?


Since it's a Std 2, now you should specify whether you need the front,
rear, or both sections since it's a 2 piece'r... There is a canopy
part that may be able to be fit for the rear section on wings & wheels
if you scroll down the page some...

http://www.wingsandwheels.com/Used%20Parts.htm

I know where a good canopy mounted to a frame for a Std 3 is should
you want to upgrade to a single piece canopy (there's already a few
2's out there with this conversion), although that's a 337 surgery as
opposed to mere maintenance... it sure is a nice view though!

-Paul


  #7  
Old July 1st 09, 05:21 AM posted to rec.aviation.soaring
Adam
external usenet poster
 
Posts: 75
Default Jantar Standard Canopy

On Jun 26, 3:14*pm, "jmarc" wrote:
You are right again. *We need only the rear part!

I took a look at the wings & wheels site. *But not sure
if I saw the one you talked about! *Is seems to be
a one piece full canopy without the little door.. *So
I will get more informations from the dealer..

Our Jantar is a SZD48-1 Standard 2
Once again, the best way is to find out there a used canopy
in pretty good condition..

So, lurking on the newgroup, I learn about the MecaPlex
company. *They seems to be the best place to get a
replacement canopy. *Maybe they built original parts for
glider constructors, too! *But it might be a bit pricy.

jmarc..

"sisu1a" wrote in message

...

But I think it will not be available that way. So I post here to

know
if anybody have very good condition Jantar canopy used, to sell..?


Since it's a Std 2, now you should specify whether you need the front,
rear, or both sections since it's a 2 piece'r... *There is a canopy
part that may be able to be fit for the rear section on wings & wheels
if you scroll down the page some...

http://www.wingsandwheels.com/Used%20Parts.htm

I know where a good canopy mounted to a frame for a Std 3 is should
you want to upgrade to a single piece canopy (there's already a few
2's out there with this conversion), although that's a 337 surgery as
opposed to mere maintenance... *it sure is a nice view though!

-Paul



Perhaps try joining and posting to the Jantar group on Yahoo.

http://groups.yahoo.com/group/jantar-sailplanes/

/Adam
  #8  
Old July 1st 09, 05:23 AM posted to rec.aviation.soaring
Adam
external usenet poster
 
Posts: 75
Default Jantar Standard Canopy

On Jun 26, 3:14*pm, "jmarc" wrote:
You are right again. *We need only the rear part!

I took a look at the wings & wheels site. *But not sure
if I saw the one you talked about! *Is seems to be
a one piece full canopy without the little door.. *So
I will get more informations from the dealer..

Our Jantar is a SZD48-1 Standard 2
Once again, the best way is to find out there a used canopy
in pretty good condition..

So, lurking on the newgroup, I learn about the MecaPlex
company. *They seems to be the best place to get a
replacement canopy. *Maybe they built original parts for
glider constructors, too! *But it might be a bit pricy.

jmarc..

"sisu1a" wrote in message

...

But I think it will not be available that way. So I post here to

know
if anybody have very good condition Jantar canopy used, to sell..?


Since it's a Std 2, now you should specify whether you need the front,
rear, or both sections since it's a 2 piece'r... *There is a canopy
part that may be able to be fit for the rear section on wings & wheels
if you scroll down the page some...

http://www.wingsandwheels.com/Used%20Parts.htm

I know where a good canopy mounted to a frame for a Std 3 is should
you want to upgrade to a single piece canopy (there's already a few
2's out there with this conversion), although that's a 337 surgery as
opposed to mere maintenance... *it sure is a nice view though!

-Paul


FWIW, the seller of that canopy recently owned a Jantar Std 2.

//Adam
  #9  
Old August 2nd 09, 08:02 PM posted to rec.aviation.soaring
sisu1a
external usenet poster
 
Posts: 569
Default Jantar Standard Canopy

On Jun 25, 7:11*am, "jmarc" wrote:
Is that possible to buy somewhere only the plastic
part of the Jantar canopy? *I should probably take a look at
the "ceebaileys" like the previous post said for the Blanik.

But I think it will not be available that way. *So I post here to know
if anybody have very good condition Jantar canopy used, to sell..?

jmarc...


if your still looking...
http://adverts.gliderpilot.net/?op=s3&id=338

-Paul
  #10  
Old August 22nd 17, 04:13 AM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 1
Default Jantar Standard Canopy

Are you always looking for a canopy for your jantar ?
I have one for sale for 1000CAD
Link of the advice: http://wingsandwheels.com/class/classified.php?id=2398
Pleasure
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
LAK-12 or a Jantar, and which model Jantar? rich Soaring 11 July 18th 05 10:54 PM
Jantar Std. 3 [email protected] Soaring 2 March 31st 05 10:50 PM
Airworthiness Directives for Jantar Standard 3 Miguel Lavalle Soaring 5 January 24th 04 10:55 AM
Cockpit sizes of standard Jantar goneill Soaring 2 December 28th 03 11:29 AM
Jantar Standard 3 Miguel Lavalle Soaring 9 November 19th 03 12:01 AM


All times are GMT +1. The time now is 03:18 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 AviationBanter.
The comments are property of their posters.