If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Or better. My wife got me a set of these http://www.airtimemfg.com/ Or yet better. A friend used these at OSH, they were the best I'd seen: http://www.theclaw.com/products/claw.php |
#22
|
|||
|
|||
On Thu, 22 Apr 2004 09:11:56 -0700, Richard Riley
wrote: On Thu, 22 Apr 2004 21:22:41 +0800, Stealth Pilot wrote: all the rest of the world went metric years ago For which we should blame the French. Well, the French were *responsible*...but I don't know if you can really blame them. You see, they *had* the English system of measurement. With one important difference: The inch was about 10% longer. As you can imagine, this plays the very devil if you have any dealings with other countries. Nautical charts, for instance...if the chart says the depth is two fathoms, you'd like to know if they're ENGLISH or French fathoms. Probably the most enduring legacy of this is the popular perception of Napoleon Bonaparte. Everybody jokes about how short he was. But his height was recorded in *French* inches. He was actually about five feet eight inches tall, about average for back then. The mathematical relationships that formed the basis for the metric system probably had less advantage than just getting rid of the old terminology. No longer was there the danger that someone would assume the wrong "inch"; now *everyone* didn't know how long 25 centimeters was. :-) A 20th century example of the same sort of confusion was solved by Stalin. He'd been invited to attend a demonstration firing of the new 120 mm artillery rocket, but when the soldiers opened the ammo case, it contained 120 mm howitzer shells. Stalin then ordered that the official designation of ammunition caliber be unique. Those rockets, for instance, might be designated 121 mm despite their being 120 mm across. When I went to Space Camp three years ago, there were a couple of Aussies there who did have trouble with the use of the English measurements used by the program. I ended up doing a lot of quick conversions for them.... Ron Wanttaja |
#23
|
|||
|
|||
"Richard Riley" wrote in message ... On Thu, 22 Apr 2004 01:12:18 -0400, "Morgans" wrote: : :Right. Just don't think that all corkscrews are created equal. The :hardware store, or dog steaks, "will" twist off at OSH. They have to be :spring steel. Or better. My wife got me a set of these http://www.airtimemfg.com/ Nice!!! -- Jim in NC --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.663 / Virus Database: 426 - Release Date: 4/20/2004 |
#24
|
|||
|
|||
"nauga" wrote in message ink.net... Morgans wrote... The hardware store, or dog steaks, "will" twist off at OSH. Mmmmm...dog steaks. Dave 'Homer' hyde Chuckle! Gim'e a brake! It was late! g -- Jim in NC --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.663 / Virus Database: 426 - Release Date: 4/20/2004 |
#25
|
|||
|
|||
Richard Riley wrote: On Thu, 22 Apr 2004 01:12:18 -0400, "Morgans" wrote: : :Right. Just don't think that all corkscrews are created equal. The :hardware store, or dog steaks, "will" twist off at OSH. They have to be :spring steel. Or better. My wife got me a set of these http://www.airtimemfg.com/ Richard, You have the second best wife on earth! Rick Pellicciotti http://www.belleaireaviation.com |
#26
|
|||
|
|||
"Morgans" wrote:
"nauga" wrote in message link.net... Morgans wrote... The hardware store, or dog steaks, "will" twist off at OSH. Mmmmm...dog steaks. Dave 'Homer' hyde Chuckle! Gim'e a brake! So you can stop and not turn Fido into dog steaks? g -- Alex Make the obvious change in the return address to reply by email. |
#27
|
|||
|
|||
I bought my CLAW at OSH 93... I love it. I have added nylon
strap/buckle/hooks for the tie downs instead of the rope and have been very happy with it. Dave Bob Fry wrote: Or better. My wife got me a set of these http://www.airtimemfg.com/ Or yet better. A friend used these at OSH, they were the best I'd seen: http://www.theclaw.com/products/claw.php |
#28
|
|||
|
|||
On Thu, 22 Apr 2004 22:00:30 -0500, Rick Pellicciotti
wrote: :Richard, :You have the second best wife on earth! You don't know the half of it. Earlier this month on my birthday, she woke me up and told me that from July 27 to Aug 2 she's taking the baby to her annual girl's retreat in Ramona. And handed me an airline ticket to Oshkosh. |
#29
|
|||
|
|||
Heh... I did mention that the chunks of concrete were for tieing down INSIDE
the hangar, right? For the record, my glider weighs 118 lbs and has 319 sq. ft. of wing. Biplane wings, stalls at about 14kts. Tieing down is very important to me. And wing walkers... gonna need wing walkers too... Harry Wright 1902 Glider #7 Wright 1899 kite Wright 1878 Bat Celebrate Freedom Festival, Camden, SC, Nov. 5-7, 2004. We'll be in one of the big hangars. |
#30
|
|||
|
|||
On Fri, 23 Apr 2004 01:03:42 GMT, Ron Wanttaja
wrote: The mathematical relationships that formed the basis for the metric system probably had less advantage than just getting rid of the old terminology. No longer was there the danger that someone would assume the wrong "inch"; now *everyone* didn't know how long 25 centimeters was. :-) So how many seconds of burn is that? A 20th century example of the same sort of confusion was solved by Stalin. He'd been invited to attend a demonstration firing of the new 120 mm artillery rocket, but when the soldiers opened the ammo case, it contained 120 mm howitzer shells. Stalin then ordered that the official designation of ammunition caliber be unique. Those rockets, for instance, might be designated 121 mm despite their being 120 mm across. And of course a .357 and a .38 are the same diameter. When I went to Space Camp three years ago, there were a couple of Aussies there who did have trouble with the use of the English measurements used by the program. I ended up doing a lot of quick conversions for them.... F-ing GE still uses english units in designing turbomachinery. (I think Pratt does too.) There're extra g's and J's all over the place. Getting rid of that crap is reason enough to put up with any amount of French rationalism. -- David Munday - Webpage: http://www.ase.uc.edu/~munday "Adopt, Adapt, and Improve" -- Motto of the Round Table |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
An Article on Unrecoverable Spins | Dave Swartz | Aerobatics | 0 | August 16th 03 06:49 AM |