A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Flarm/ClearNav Help Needed



 
 
Thread Tools Display Modes
  #1  
Old December 21st 16, 01:48 AM posted to rec.aviation.soaring
Dan Marotta
external usenet poster
 
Posts: 4,601
Default Flarm/ClearNav Help Needed

Hi All,

I built a cable for My Power FLARM portable according to the drawing on
the Tech Tips portion of the ClearNav site but The CN does not connect
to the Flarm. I have a cable tester and the cable checks good. I've
tried baud rates from 19.2 to 57.6K and still no luck.

I also spoke with another CNII user at Moriarty and he asked me if I'd
enabled FLARM on my CNII. I've looked and can't find anything other
than Flarm Status - There is none, and Flarm Alerts and I have the
longest alerts selected.

What about the Flarm dataport strings? Flarm Only or Flarm and Nav
(I've tried it both ways without success)? Does anyone have any other
suggestions?

--
Dan, 5J
Ads
  #2  
Old December 21st 16, 02:25 AM posted to rec.aviation.soaring
RW[_2_]
external usenet poster
 
Posts: 70
Default Flarm/ClearNav Help Needed

On Tuesday, December 20, 2016 at 7:48:11 PM UTC-5, Dan Marotta wrote:
Hi All,

I built a cable for My Power FLARM portable according to the drawing on
the Tech Tips portion of the ClearNav site but The CN does not connect
to the Flarm. I have a cable tester and the cable checks good. I've
tried baud rates from 19.2 to 57.6K and still no luck.

I also spoke with another CNII user at Moriarty and he asked me if I'd
enabled FLARM on my CNII. I've looked and can't find anything other
than Flarm Status - There is none, and Flarm Alerts and I have the
longest alerts selected.

What about the Flarm dataport strings? Flarm Only or Flarm and Nav
(I've tried it both ways without success)? Does anyone have any other
suggestions?

--
Dan, 5J


Power Flarm has to finish power up dance before you start CN.
Ryszard
  #3  
Old December 21st 16, 02:49 AM posted to rec.aviation.soaring
JS
external usenet poster
 
Posts: 1,384
Default Flarm/ClearNav Help Needed

On Tuesday, December 20, 2016 at 5:25:16 PM UTC-8, RW wrote:
On Tuesday, December 20, 2016 at 7:48:11 PM UTC-5, Dan Marotta wrote:
Hi All,

I built a cable for My Power FLARM portable according to the drawing on
the Tech Tips portion of the ClearNav site but The CN does not connect
to the Flarm. I have a cable tester and the cable checks good. I've
tried baud rates from 19.2 to 57.6K and still no luck.

I also spoke with another CNII user at Moriarty and he asked me if I'd
enabled FLARM on my CNII. I've looked and can't find anything other
than Flarm Status - There is none, and Flarm Alerts and I have the
longest alerts selected.

What about the Flarm dataport strings? Flarm Only or Flarm and Nav
(I've tried it both ways without success)? Does anyone have any other
suggestions?

--
Dan, 5J


Power Flarm has to finish power up dance before you start CN.
Ryszard


Also the higher the baud rate, the longer the connection process. The CN2 starts looking at low rates then goes higher.
Jim
  #4  
Old December 21st 16, 04:44 AM posted to rec.aviation.soaring
Tango Eight
external usenet poster
 
Posts: 962
Default Flarm/ClearNav Help Needed

Dan -- pls check the forum.

Thx

Evan
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
trying to work out how you connect the flarm view 57 to mini box flarm running a V7 and Oudie Michael Marshall[_2_] Soaring 3 April 10th 16 04:13 AM
trying to work out how you connect the flarm view 57 to mini box flarm running a V7 and Oudie Michael Marshall[_2_] Soaring 0 April 8th 16 08:57 PM
Information for all users of Flarm, OEM FLARM supplier and Flarm PowerFlarm [email protected] Soaring 28 March 12th 16 05:31 AM
Integrating Flarm with Clearnav [email protected] Soaring 8 September 6th 12 01:33 PM
Help needed: ILEC SN10 pilots with FLARM Dave Nadler Soaring 2 December 1st 09 01:03 AM


All times are GMT +1. The time now is 01:39 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 AviationBanter.
The comments are property of their posters.