If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Navion Parts Availability
"PiperSeneca@" wrote: What is the parts availability like for 1940's vintage Navions? Not bad at all. One guy just bought the contents of the Navion factory. From what I've heard, the people that bought the paperwork are trying to make the parts considered bogus, but I don't think they have a chance. He got 9 truckloads of parts including things people hadn't seen in years. The Navion Society has some drawings that they have been making parts from for years (the guys that bought the rest of the drawings are trying to make those bogus also). We've never had problems getting parts. And how much commonality do they have with the later upgraded models up through the 60's Rangemasters? Not sure, but I'm also not sure I'd call a Rangemaster an upgrade (as she ducks from the objects being thrown by rangemaster owners). There seem to be several Navion owners groups. If so, what's the difference between them? Politics! Well, a few more differences. The American Navion Society is a company and it has a large parts dept. You must be a memeber to buy parts. Navion Skies has a great want ads section and they organized more trips (South Africa, Europe, etc.). We belong to both. And finally, ownwers impressions of the aircraft would be appreciated. Best airplane ever made :-). Big, roomy, can carry the kitchen sink. Faster than a 172, not as fast as a Bonanza. We can carry camping gear for a long week and 2 folding motor bikes with no problem. It handles very nicely and is rather docile. Ours is in for the conversion to an IO550 and we've gotten a bad case of the might as wells. It will be great when it's done!!! You need to get a copy of the Navion Societies "How to buy a Navion". It's a bit dated, but so are the planes :-). We had a GO-435 engine in ours. It was great while it lasted, but when it blows you really need to re-engine and that's $$$$. If you know that going in it isn't too bad and ours lasted 6 years. If you can find one with a big (modern) engine in it from the start it is great, but more expensive. You should join the societies now and get to know some Navion folks. They are your best resources when you are looking at planes. If you can find the local Navion mechanic that would be a big help also. Margy |
#2
|
|||
|
|||
"rip" wrote in message gy.com... Parts availability is generally quite good. The type certificate and tooling was recently purchased by Sierra Hotel Aero (http://www.navion.com/), so they can actually provide factory new parts if needed. They're too busy hasseling ohter Navion shops to build parts right now. |
#3
|
|||
|
|||
Not sure I understand who is the bad guy here. Who is making the "bogus"
parts? Sierra Hotel Aero bought, at auction, the Navion type certificate (etc) this past December. Are they now trying to protect their auction purchase - Navion's type certificate. Is this a bad thing in Navion owners' eyes, or a good thing? Are others making parts without Sierra Hotel Aero's ok. Do they need the ok? Is this where the battle lines are? Who's winning so far? What do you project the fuel burn per hour numbers will be in you Navion? Will it be fuel injected? IO550. Does the "I" stand for in-line or (fuel) injected? Will you get a paperwork increase in useful load with the bigger HP engine? -- Montblack ("Margy Natalie" wrote) Not bad at all. One guy just bought the contents of the Navion factory. From what I've heard, the people that bought the paperwork are trying to make the parts considered bogus, but I don't think they have a chance. He got 9 truckloads of parts including things people hadn't seen in years. The Navion Society has some drawings that they have been making parts from for years (the guys that bought the rest of the drawings are trying to make those bogus also). We've never had problems getting parts. snip |
#4
|
|||
|
|||
Montblack wrote: Not sure I understand who is the bad guy here. Who is making the "bogus" parts? No one is making "bogus" parts. Sierra Hotel bought the type certificate and can make new parts. Classic-Aero bought the parts inventory. SH is saying that C-A's parts are bad because SH owns the type certificate. Sierra Hotel Aero bought, at auction, the Navion type certificate (etc) this past December. Are they now trying to protect their auction purchase - Navion's type certificate. Is this a bad thing in Navion owners' eyes, or a good thing? Having SH own the type certifiicate is good, but it is also good to have 9 truckloads of parts available. Are others making parts without Sierra Hotel Aero's ok. Do they need the ok? An owner can make parts for thier own airplane. C-A is selling parts that were made by the factory 50 years ago. Is this where the battle lines are? Who's winning so far? I think they will both win (I hope) What do you project the fuel burn per hour numbers will be in you Navion? Will it be fuel injected? IO550. Does the "I" stand for in-line or (fuel) injected? It's injected. I'm not sure what the fuel burn will be, but it will be great when it's done. I expect 16 + or so?? Will you get a paperwork increase in useful load with the bigger HP engine? I don't think we will as we already had a 260 HP and the tips. We had to re-engine as we didn't have one that worked and the 520 or the 550 is the way to go. The 550 became available and we grabbed it. Margy |
#5
|
|||
|
|||
An owner can make parts for thier own airplane. C-A is selling parts that
were made by the factory 50 years ago. These are airframe parts, right? There's just something about a fifty year-old part that worries me, although I can't say exactly why... It's injected. I'm not sure what the fuel burn will be, but it will be great when it's done. I expect 16 + or so?? Hmmm. With our O-540, we can lean it back to 14-15 gph in cruise, but it gets as high as 25 gph on take off. -- Jay Honeck Iowa City, IA Pathfinder N56993 www.AlexisParkInn.com "Your Aviation Destination" |
#6
|
|||
|
|||
Jay Honeck wrote: These are airframe parts, right? There's just something about a fifty year-old part that worries me, although I can't say exactly why... Why? Lots of people are flying in collections of fifty year-old parts. George Patterson They say that nothing's certain except death and taxes. The thing is, death doesn't get worse every time Congress goes into session. Will Rogers |
#7
|
|||
|
|||
In rec.aviation.owning JimC wrote:
: There are some on a Navion in Sanford, FL, although some of them are a : little bent as of the middle of last week. See the thread titled "My Plane : Almost Became an Insurance Claim" and http://navionpics.swegian.com/ for the : pictures. : JimC Ha! I just happen to have a line on some Navion parts, including a set of wings! Combined with that baby-blue Navion's fuselage, it'd be a nice machine. Explanation: My mechanic is a Navion nut. He's got one, and we have 3 more on the field. He "rescued" his from a local trade school that was using it to teach A&P candidates, and had been doing so for almost 50 years. He's totally redone the thing and it's quite nice. It's a 1950 Ryan Navion "A", converted from the E-185 to an IO-470 that once graced the left wing of a 310. He knows someone who's got 3 disassembled Navions in his barn! -- Aaron Coolidge (N9376J) |
#8
|
|||
|
|||
You wouldn't let a little inter granular corrosion worry you, would you?
Ain't any corrosion on these parts. They've not been stored in Vero Beach like your Cherokee parts were. Just curious: Where *were* they stored, Ron? And who the heck was paying rent on nice, dry, buildings to store old airplane parts? And how come no one knew about them? (This is starting to sound like a Howard Hughes-style story...) -- Jay Honeck Iowa City, IA Pathfinder N56993 www.AlexisParkInn.com "Your Aviation Destination" |
#9
|
|||
|
|||
Margy Jay Honeck wrote: Just curious: Where *were* they stored, Ron? They were stored by whoever happened to own them at the time (until now the type certificate and the parts always belonged to one owner). The last place they were stored was in Ohio, before that Texas I think. And who the heck was paying rent on nice, dry, buildings to store old airplane parts? Whoever had the type certificate at the time. And how come no one knew about them? (This is starting to sound like a Howard Hughes-style story...) -- Well, the owners of the type certificates up to now had the idea that they would build Navions, so this was factory stock, not parts available. As far as I can tell there was no real inventory of the parts. The guy who is working on our plane bought the whole load and he figures he should have them inventoried within the year (there are LOTS of parts). I've seen boxes and boxes of parts and the cardboard on the boxes looked good, so I would guess they haven't seen water. Margy |
#10
|
|||
|
|||
"Jay Honeck" wrote in message news:IYc_a.129716$uu5.18626@sccrnsc04... You wouldn't let a little inter granular corrosion worry you, would you? Ain't any corrosion on these parts. They've not been stored in Vero Beach like your Cherokee parts were. Just curious: Where *were* they stored, Ron? Seguin, Texas and later Bowling Green, Ohio. Currently they are in Aurora Nebraska. Might have made other stops. Also, a lot of this stuff carried over from the original North American days. NA had the presense of mind to zinc chromate everything in sight. And how come no one knew about them? (This is starting to sound like a Howard Hughes-style story...) When the last real Navion "factory" shutdown in around 1971 in Texas, a group of people founded the American Navion Society and bought up what they could get of the inventory. Nobody really knew how much other stuff was left squirrelled away. The type certificate and the factory tooling kind of languished around for a couple of decades with the general recession of the GA aircraft industry. Around 1996 or so, a group in Bowling Green, OH managed to snag the remains of Navion Aircraft. They hunted venture capital to see if they could start up the line again. I guess that didn't succeed (frankly, it's the same old problem, they were going to build Rangemasters, and why anybody would want a draggy cabin retract at that price is beyond me). The whole thing was auctioned off last year again. As I said, SH got the tooling and the paperwork while Classic Aero got nine tractor-trailer loads of the inventory. These aren't just "spares" these were the backlog of the assembly line waiting to be built. There are entire wings there. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cleveland Parking Brake Parts | Jeff | Home Built | 2 | October 11th 04 10:38 PM |
Military parts were flawed, indictment says | Otis Willie | Military Aviation | 0 | September 3rd 04 08:58 PM |
FS: Aircraft Instruments Parts Avionics Warbird Parts | Bill Berle | Home Built | 0 | January 10th 04 02:20 AM |
FS: Aircraft Instruments Parts Avionics Warbird Parts | Bill Berle | Aviation Marketplace | 0 | January 10th 04 02:20 AM |
The urban legend of the buried spitfire parts | MBannister | Military Aviation | 1 | July 28th 03 01:15 AM |