If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Brass or copper sheet?
For one of my different hobbies...does anybody have a good source for
brass or copper sheet? I'm thinking something around 0.025" or 0.032" and two pieces that are about 30" X 30" or so each. Would I need to take out a second mortgage to obtain pieces like that? Scott |
#2
|
|||
|
|||
Brass or copper sheet?
Scott wrote:
For one of my different hobbies...does anybody have a good source for brass or copper sheet? I'm thinking something around 0.025" or 0.032" and two pieces that are about 30" X 30" or so each. Would I need to take out a second mortgage to obtain pieces like that? Scott McMaster-Carr Dan, U.S. Air Force, retired |
#3
|
|||
|
|||
Brass or copper sheet?
Scott wrote: For one of my different hobbies...does anybody have a good source for brass or copper sheet? I'm thinking something around 0.025" or 0.032" and two pieces that are about 30" X 30" or so each. Would I need to take out a second mortgage to obtain pieces like that? Scott Try McMaster-Carr. |
#4
|
|||
|
|||
Brass or copper sheet?
Scott wrote: For one of my different hobbies...does anybody have a good source for brass or copper sheet? I'm thinking something around 0.025" or 0.032" and two pieces that are about 30" X 30" or so each. Would I need to take out a second mortgage to obtain pieces like that? http://www.smallparts.com/ They don't list sheets larger than 2' x 2' but may sell them upon request. -- FF |
#5
|
|||
|
|||
Brass or copper sheet?
Scott wrote: For one of my different hobbies...does anybody have a good source for brass or copper sheet? I'm thinking something around 0.025" or 0.032" and two pieces that are about 30" X 30" or so each. Would I need to take out a second mortgage to obtain pieces like that? http://www.smallparts.com/ They don't list sheets larger than 2' x 2' but may sell them upon request. -- FF |
#6
|
|||
|
|||
Brass or copper sheet?
First place I'd try for copper is a roofer; they use it for flashing.
I'm not sure about the thickness. On Fri, 13 Oct 2006 11:13:09 +0000, Scott wrote: For one of my different hobbies...does anybody have a good source for brass or copper sheet? I'm thinking something around 0.025" or 0.032" and two pieces that are about 30" X 30" or so each. Would I need to take out a second mortgage to obtain pieces like that? Scott |
#7
|
|||
|
|||
Brass or copper sheet?
Scott wrote in
: For one of my different hobbies...does anybody have a good source for brass or copper sheet? I'm thinking something around 0.025" or 0.032" and two pieces that are about 30" X 30" or so each. Would I need to take out a second mortgage to obtain pieces like that? Scott Online Metals http://www.onlinemetals.com/ Ken |
#8
|
|||
|
|||
Brass or copper sheet?
On Fri, 13 Oct 2006 11:13:09 +0000, Scott
wrote: For one of my different hobbies...does anybody have a good source for brass or copper sheet? I'm thinking something around 0.025" or 0.032" and two pieces that are about 30" X 30" or so each. Would I need to take out a second mortgage to obtain pieces like that? Scott Try Metal Source in Woburn MA. They handle all non ferrous metals and deal in small orders. Talk to Ed and I am usre that he will be able to help you out. Of course they UPS. We ordered 80 feet of .750 diameter 6061 rod stock on Tuesday and had it Wednesday afternoor. Of course we are only about 90 miles from them. http://www.metalsource.com/ Errol Groff Instructor, Manufacturing Technology H.H. Ellis Technical High School 613 Upper Maple Street Danielson, CT 06239 New England Model Engineering Society www.neme-s.org |
#9
|
|||
|
|||
Brass or copper sheet?
I'll take a look there...thanks!
Scott Ken Moffett wrote: Scott wrote in : For one of my different hobbies...does anybody have a good source for brass or copper sheet? I'm thinking something around 0.025" or 0.032" and two pieces that are about 30" X 30" or so each. Would I need to take out a second mortgage to obtain pieces like that? Scott Online Metals http://www.onlinemetals.com/ Ken |
#10
|
|||
|
|||
Brass or copper sheet?
Thanks for the tip! I'll look at their website...
Scott Errol Groff wrote: On Fri, 13 Oct 2006 11:13:09 +0000, Scott wrote: For one of my different hobbies...does anybody have a good source for brass or copper sheet? I'm thinking something around 0.025" or 0.032" and two pieces that are about 30" X 30" or so each. Would I need to take out a second mortgage to obtain pieces like that? Scott Try Metal Source in Woburn MA. They handle all non ferrous metals and deal in small orders. Talk to Ed and I am usre that he will be able to help you out. Of course they UPS. We ordered 80 feet of .750 diameter 6061 rod stock on Tuesday and had it Wednesday afternoor. Of course we are only about 90 miles from them. http://www.metalsource.com/ Errol Groff Instructor, Manufacturing Technology H.H. Ellis Technical High School 613 Upper Maple Street Danielson, CT 06239 New England Model Engineering Society www.neme-s.org |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Copper in oil analysis ? | [email protected] | Owning | 8 | August 22nd 06 12:31 PM |
Copper in oil analysis ? | [email protected] | Instrument Flight Rules | 8 | August 22nd 06 12:31 PM |
FS: 1930's Space Exploration Un-Cut Tatoo Sheet | J.R. Sinclair | Aviation Marketplace | 0 | June 7th 04 06:28 AM |