Logger direct to Android phone?

Is it possible to download a flight file from an IGC approved logger into an Android phone then email the file to contest scoring without corrupting the file?

Of course.
Doing that already with ClearNav, using ES File Explorer and an OTG cable.
Jim

Able to do via blue tooth from Nano to Android device

On 06/02/2014 3:44 PM, 6X wrote:
Able to do via blue tooth from Nano to Android device

You can download from many IGC approved recorders using XCSoar and an
IOIO based adapter.

Luke

....or a Bluetooth link...

Dan Marotta

On 6/3/2014 9:17 AM, Luke Szczepaniak wrote:
On 06/02/2014 3:44 PM, 6X wrote:
Able to do via blue tooth from Nano to Android device

You can download from many IGC approved recorders using XCSoar and an
IOIO based adapter.

Luke

What are the XCSoar settings to use to get the Android phone to talk to the 302?
I have a 302 with USB connection and that was talking to my Nook on Sunday but today I tried to get the Android phone to communicate without success. I am using an OTG cable. Is the sequence of connecting it important?

Thanks,

Bob 7U

Thanks for your info Dan...

Bob 7U

On Tuesday, June 3, 2014 5:35:11 PM UTC-4, Dan Marotta wrote:
...or a Bluetooth link...



Dan Marotta



On 6/3/2014 9:17 AM, Luke Szczepaniak wrote:

On 06/02/2014 3:44 PM, 6X wrote:

Able to do via blue tooth from Nano to Android device



You can download from many IGC approved recorders using XCSoar and an

IOIO based adapter.



Luke

On 06/04/2014 7:28 PM, wrote:
What are the XCSoar settings to use to get the Android phone to talk to the 302?
I have a 302 with USB connection and that was talking to my Nook on Sunday but today I tried to get the Android phone to communicate without success. I am using an OTG cable. Is the sequence of connecting it important?

Thanks,

Bob 7U


Hi Bob, the connection on the android phone should be the same as on the
nook, 4800 baud and UART0 (unless you have your IOIO OTG wired
differently). To download the flights to my phone I have to set my bulk
download rate to 4800 as well.

Luke

Thanks Luke... I will give that a try this weekend. It was set to 'Default' so this may be the setting that works.

Bob 7U

On Thursday, June 5, 2014 8:30:38 AM UTC-4, Luke Szczepaniak wrote:
On 06/04/2014 7:28 PM, wrote:

What are the XCSoar settings to use to get the Android phone to talk to the 302?

I have a 302 with USB connection and that was talking to my Nook on Sunday but today I tried to get the Android phone to communicate without success. I am using an OTG cable. Is the sequence of connecting it important?



Thanks,



Bob 7U





Hi Bob, the connection on the android phone should be the same as on the

nook, 4800 baud and UART0 (unless you have your IOIO OTG wired

differently). To download the flights to my phone I have to set my bulk

download rate to 4800 as well.



Luke