A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

tap for lycoming exhaust port



 
 
Thread Tools Display Modes
  #1  
Old August 1st 10, 04:15 AM
LukeCS LukeCS is offline
Junior Member
 
First recorded activity by AviationBanter: Aug 2010
Posts: 1
Default tap for lycoming exhaust port

I have had to reface the exhaust port on my number 1 cylinder. The directions for the refacing tool say I should clean the threads of the hole the exhaust studs go in but I can not find a tap to match the threads nor can I find a die to match the threads on one of the new exhaust studs on the side that threads into the cylinder. The threads for the flange side are different but both are 5/16. Where can I find a tap and or die? Thanks
Ads
  #2  
Old August 2nd 10, 09:58 PM posted to rec.aviation.owning
Herb Feldman
external usenet poster
 
Posts: 1
Default tap for lycoming exhaust port

Try this link, www.HermansCentral.com,
Herb

"LukeCS" wrote in message
...

I have had to reface the exhaust port on my number 1 cylinder. The
directions for the refacing tool say I should clean the threads of the
hole the exhaust studs go in but I can not find a tap to match the
threads nor can I find a die to match the threads on one of the new
exhaust studs on the side that threads into the cylinder. The threads
for the flange side are different but both are 5/16. Where can I find a
tap and or die? Thanks




--
LukeCS


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tuned exhaust for the Lycoming 0320 Stuart & Kathryn Fields Rotorcraft 4 June 21st 08 04:09 AM
tuned exhaust for a lycoming 0320 Stuart & Kathryn Fields Home Built 3 May 20th 08 03:55 AM
On the job with a port trucker: Port truckers like Marvin Palacios are the tiniest players in a prosperous global transport chain. But while big companies cash in, drivers barely make Goteborgbank Naval Aviation 1 October 13th 07 02:44 PM
On the job with a port trucker: Port truckers like Marvin Palacios are the tiniest players in a prosperous global transport chain. But while big companies cash in, drivers barely make Goteborgbank Piloting 2 October 2nd 07 10:12 PM
Lycoming 0-320 Exhaust studs working loose Mike Spera Owning 9 May 26th 07 03:25 AM


All times are GMT +1. The time now is 12:49 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004-2017 AviationBanter.
The comments are property of their posters.