A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Flarm error 43



 
 
Thread Tools Display Modes
  #1  
Old May 20th 21, 04:07 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 2
Default Flarm error 43

I updated my flarm and SN10 software yesterday. (pf 7.04 and 2.46 respectively).

On startup the SN10 tells me I have flarm error 43 and the butterfly display shows a yellow triangle and another warning message that sounded fatal.

When I press the SN10 "help" button, the error message disappears and when I press the far left butterfly button, that warning also disappears and I get no further error messages and the SN10 gets gps input normally and the flarm seemed to work normally although I didn't get any traffic info because, I think, there was none to be had.

Does anybody know what flarm error 43 is or where I could find out?



  #2  
Old May 20th 21, 05:10 PM posted to rec.aviation.soaring
Nick Hill[_3_]
external usenet poster
 
Posts: 50
Default Flarm error 43

On 20/05/2021 16:07, wrote:
I updated my flarm and SN10 software yesterday. (pf 7.04 and 2.46 respectively).

On startup the SN10 tells me I have flarm error 43 and the butterfly display shows a yellow triangle and another warning message that sounded fatal.

When I press the SN10 "help" button, the error message disappears and when I press the far left butterfly button, that warning also disappears and I get no further error messages and the SN10 gets gps input normally and the flarm seemed to work normally although I didn't get any traffic info because, I think, there was none to be had.

Does anybody know what flarm error 43 is or where I could find out?




Various Flarm uni manuals have

43 = Wrong ICAO 24-bit address or radio ID

--

Nick Hill
  #3  
Old May 20th 21, 05:50 PM posted to rec.aviation.soaring
Dan Daly[_2_]
external usenet poster
 
Posts: 718
Default Flarm error 43

On Thursday, May 20, 2021 at 12:10:28 PM UTC-4, Nick Hill wrote:
On 20/05/2021 16:07, wrote:
I updated my flarm and SN10 software yesterday. (pf 7.04 and 2.46 respectively).

On startup the SN10 tells me I have flarm error 43 and the butterfly display shows a yellow triangle and another warning message that sounded fatal.

When I press the SN10 "help" button, the error message disappears and when I press the far left butterfly button, that warning also disappears and I get no further error messages and the SN10 gets gps input normally and the flarm seemed to work normally although I didn't get any traffic info because, I think, there was none to be had.

Does anybody know what flarm error 43 is or where I could find out?



Various Flarm uni manuals have

43 = Wrong ICAO 24-bit address or radio ID

--

Nick Hill

Butterfly error is due to compatibility with later flarm versions. Have you updated to version 4 of the Butterfly firmware? I will post a link momentarily.

  #4  
Old May 20th 21, 05:53 PM posted to rec.aviation.soaring
Dan Daly[_2_]
external usenet poster
 
Posts: 718
Default Flarm error 43

On Thursday, May 20, 2021 at 12:50:41 PM UTC-4, Dan Daly wrote:
On Thursday, May 20, 2021 at 12:10:28 PM UTC-4, Nick Hill wrote:
On 20/05/2021 16:07, wrote:
I updated my flarm and SN10 software yesterday. (pf 7.04 and 2.46 respectively).

On startup the SN10 tells me I have flarm error 43 and the butterfly display shows a yellow triangle and another warning message that sounded fatal.

When I press the SN10 "help" button, the error message disappears and when I press the far left butterfly button, that warning also disappears and I get no further error messages and the SN10 gets gps input normally and the flarm seemed to work normally although I didn't get any traffic info because, I think, there was none to be had.

Does anybody know what flarm error 43 is or where I could find out?



Various Flarm uni manuals have

43 = Wrong ICAO 24-bit address or radio ID

--

Nick Hill

Butterfly error is due to compatibility with later flarm versions. Have you updated to version 4 of the Butterfly firmware? I will post a link momentarily.


Here is a link to the thread. The first item, from Dave Nadler, gives the link for the software update, and describes how to do it. Thanks again to Dave for keeping Butterfly Displays going! https://groups.google.com/g/rec.avia...m/eNCyO1mnCwAJ
  #5  
Old May 20th 21, 07:26 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 2
Default Flarm error 43

On Thursday, May 20, 2021 at 12:53:48 PM UTC-4, Dan Daly wrote:
On Thursday, May 20, 2021 at 12:50:41 PM UTC-4, Dan Daly wrote:
On Thursday, May 20, 2021 at 12:10:28 PM UTC-4, Nick Hill wrote:
On 20/05/2021 16:07, wrote:
I updated my flarm and SN10 software yesterday. (pf 7.04 and 2.46 respectively).

On startup the SN10 tells me I have flarm error 43 and the butterfly display shows a yellow triangle and another warning message that sounded fatal.

When I press the SN10 "help" button, the error message disappears and when I press the far left butterfly button, that warning also disappears and I get no further error messages and the SN10 gets gps input normally and the flarm seemed to work normally although I didn't get any traffic info because, I think, there was none to be had.

Does anybody know what flarm error 43 is or where I could find out?



Various Flarm uni manuals have

43 = Wrong ICAO 24-bit address or radio ID

--

Nick Hill

Butterfly error is due to compatibility with later flarm versions. Have you updated to version 4 of the Butterfly firmware? I will post a link momentarily.

Here is a link to the thread. The first item, from Dave Nadler, gives the link for the software update, and describes how to do it. Thanks again to Dave for keeping Butterfly Displays going! https://groups.google.com/g/rec.avia...m/eNCyO1mnCwAJ

Thanks, everyone!
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
trying to work out how you connect the flarm view 57 to mini box flarm running a V7 and Oudie Michael Marshall[_2_] Soaring 3 April 10th 16 04:13 AM
trying to work out how you connect the flarm view 57 to mini box flarm running a V7 and Oudie Michael Marshall[_2_] Soaring 0 April 8th 16 08:57 PM
Information for all users of Flarm, OEM FLARM supplier and Flarm PowerFlarm [email protected] Soaring 28 March 12th 16 05:31 AM
Flarm IGC files on non-IGC certified Flarm? Movses Soaring 21 March 16th 15 10:59 PM
Flarm error glidergreg Soaring 5 September 8th 14 05:16 AM


All times are GMT +1. The time now is 08:46 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.