A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Anyone familiar with NAS1834, NAS 1832 and NAS1836?



 
 
Thread Tools Display Modes
  #1  
Old July 12th 12, 08:03 PM posted to rec.aviation.soaring
AGL
external usenet poster
 
Posts: 47
Default Anyone familiar with NAS1834, NAS 1832 and NAS1836?

Hi;

We're building hand controls for the disabled as part of the Freedom's
Wings program in Canada, and the designer/engineer has specified the
following epoxy potted insets:

Three NAS1834-5-750 Substitute TYE2003, SL603, D1834 or
AEP1034-5-750
Three NAS1832-5-16 Substitute TYE2002, SL601, D1832 or AEP1036N-5-500
Eighteen NAS1836-3-20

The last one is easy to get, but the first two do not seem to be in
stock anywhere. I've tried TYE's distributors, Interfast, Wescoair
and Genuine Aircraft Hardware and MANY local and internet suppliers.
we are into triplle digit e-mails now and hours on the phone. Most
suppliers seem to have inventory systems taking them right back
through the supply chains to the manufacturers, who are quoting 16
weeks delivery, and I haven't even told them I only need a few.

I am hoping that someone on this list works for an aviation company
that uses these parts or parts from a supplier that carries these
parts. Are there any sitting on a shelf somewhere? Can someone
leverage thier suppliers to find them?

Other than final Transport Canada approval of the "as-bilt" drawings,
it's the only thing in the way of setting this done.

Thanks!

Martin
  #2  
Old July 12th 12, 08:40 PM posted to rec.aviation.soaring
sisu1a
external usenet poster
 
Posts: 569
Default Anyone familiar with NAS1834, NAS 1832 and NAS1836?


Three NAS1834-5-750 Substitute * TYE2003, SL603, D1834 or
AEP1034-5-750
Three NAS1832-5-16 Substitute TYE2002, SL601, D1832 or AEP1036N-5-500
Eighteen NAS1836-3-20



suppliers seem to have inventory systems taking them right back
through the supply chains to the manufacturers, who are quoting 16
weeks delivery, and I haven't even told them I only need a few.



http://www.nor-calsupply.com/ is a good place to try, best bet is to
call them at the number listed...

-p
  #3  
Old July 12th 12, 09:09 PM posted to rec.aviation.soaring
Bob Kuykendall
external usenet poster
 
Posts: 1,345
Default Anyone familiar with NAS1834, NAS 1832 and NAS1836?

On Jul 12, 12:03*pm, AGL wrote:

We're building hand controls for the disabled as part of the Freedom's
Wings program in Canada, and the designer/engineer has specified the
following epoxy potted insets...


Simplest solution: Get the designer/engineer to change to a more
common part, or get a different designer/engineer.

When I design with NAS hardware, it is because I have bags and bags of
them on hand and I'm trying to use them up. All other hardware is COTS
items from Aircraft Spruce or McMaster-Carr, or can be made from
common materials according to simple drawings.

Thanks, Bob K.
  #4  
Old July 13th 12, 01:47 AM posted to rec.aviation.soaring
AGL
external usenet poster
 
Posts: 47
Default Anyone familiar with NAS1834, NAS 1832 and NAS1836?

On Jul 12, 4:09*pm, Bob Kuykendall wrote:

Simplest solution: Get the designer/engineer to change to a more
common part, or get a different designer/engineer.


Yes, on the face of it that makes sense, however, the designer is
doing this on a pro-bono basis, and he's very busy with no time to
entertain changes.

When I design with NAS hardware, it is because I have bags and bags of
them on hand and I'm trying to use them up. All other hardware is COTS
items from Aircraft Spruce or McMaster-Carr, or can be made from
common materials according to simple drawings.


It would be great if we could use COTS parts, but we must use aircraft
parts with complete traceability and manufacturer certs to meet the
approval of the engineer and Transport Canada.

If we could build it COTS it would have been done 2 years ago. It's
extremely frustrating.

Martin

  #5  
Old July 13th 12, 02:24 AM posted to rec.aviation.soaring
aerodyne
external usenet poster
 
Posts: 63
Default Anyone familiar with NAS1834, NAS 1832 and NAS1836?


Potted inserts are not common COTS items, however, the designer should
have no problem substituting with a commercial (Think Rosan) style
insert.

Have your designer contact me, I'll hook him up with parts that are
available yet meet commercial/mil specs.

aerodyneatsocaldotrrdotcom
  #6  
Old July 13th 12, 03:03 AM posted to rec.aviation.soaring
AGL
external usenet poster
 
Posts: 47
Default Anyone familiar with NAS1834, NAS 1832 and NAS1836?

On Jul 12, 9:24*pm, aerodyne wrote:

Have your designer contact me, I'll hook him up with parts that are
available yet meet commercial/mil specs.


aerodyneatsocaldotrrdotcom


Hi;

Thae designer does have a problem substituting non-aircraft parts.
sigh

Do you have any documentation for the substitutes you know about?

Martin

  #7  
Old August 20th 15, 08:41 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 1
Default Anyone familiar with NAS1834, NAS 1832 and NAS1836?

Martin, did you ever find a supply for your NAS1834 inserts? We manufacture all NAS1832 - NAS1834 inserts and can do custom lengths and sizes.
  #8  
Old July 13th 12, 02:39 AM posted to rec.aviation.soaring
aerodyne
external usenet poster
 
Posts: 63
Default Anyone familiar with NAS1834, NAS 1832 and NAS1836?

I tried these folks for NAS replacement bolts for Pawnee wheels, very
reasonable when I told them I needed 1000's of similar part numbers at
work. I deal with a lot of vendors, these guys are so good I had them
added to my companies approved buyer list. Anyone that has stock on
long titanium bolts is a vendor to remember.

Links below show a large number of records for the two NAS numbers you
had problems with. Call Tim, he can help with P&D quote:

http://www.iso-group.com/Public/Sear...spx?ss=nas1832

http://www.iso-group.com/Public/Sear...spx?ss=nas1834

aerodyne
  #9  
Old October 7th 17, 06:48 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 2
Default Anyone familiar with NAS1834, NAS 1832 and NAS1836?

On Thursday, 12 July 2012 20:03:02 UTC+1, AGL wrote:
Hi;

We're building hand controls for the disabled as part of the Freedom's
Wings program in Canada, and the designer/engineer has specified the
following epoxy potted insets:

Three NAS1834-5-750 Substitute TYE2003, SL603, D1834 or
AEP1034-5-750
Three NAS1832-5-16 Substitute TYE2002, SL601, D1832 or AEP1036N-5-500
Eighteen NAS1836-3-20
googl.com10101010101010101010101010101010101010101 01010101010101010101010101010101010101010101010101 01010101010101010101010101010101010101010101010101 01010101010101010101010101010101011010101010101010 10101010101010101010101010011010101010011010101010 10101010101010101001011010101010010101101001010101 01100101100110011010101001010110101010010101101010 10101010101010101010101010101010101010101010101010 10101010101010101010101010101010101010101010101010 1010101010101010101010101
The last one is easy to get, but the first two do not seem to be in
stock anywhere. I've tried TYE's distributors, Interfast, Wescoair
and Genuine Aircraft Hardware and MANY local and internet suppliers.
we are into triplle digit e-mails now and hours on the phone. Most
suppliers seem to have inventory systems taking them right back
through the supply chains to the manufacturers, who are quoting 16
weeks delivery, and I haven't even told them I only need a few.

I am hoping that someone on this list works for an aviation company
that uses these parts or parts from a supplier that carries these
parts. Are there any sitting on a shelf somewhere? Can someone
leverage thier suppliers to find them?

Other than final Transport Canada approval of the "as-bilt" drawings,
it's the only thing in the way of setting this done.

Thanks!

Martin


  #10  
Old October 7th 17, 06:50 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 2
Default Anyone familiar with NAS1834, NAS 1832 and NAS1836?

On Thursday, 12 July 2012 20:03:02 UTC+1, AGL wrote:
Hi;

We're building hand controls for the disabled as part of the Freedom's
Wings program in Canada, and the designer/engineer has specified the
following epoxy potted insets:

Three NAS1834-5-750 Substitute TYE2003, SL603, D1834 or
AEP1034-5-750
Three NAS1832-5-16 Substitute TYE2002, SL601, D1832 or AEP1036N-5-500
Eighteen NAS1836-3-20

The last one is easy to get, but the first two do not seem to be in
stock anywhere. I've tried TYE's distributors, Interfast, Wescoair
and Genuine Aircraft Hardware and MANY local and internet suppliers.
we are into triplle digit e-mails now and hours on the phone. Most
suppliers seem to have inventory systems taking them right back
through the supply chains to the manufacturers, who are quoting 16
weeks delivery, and I haven't even told them I only need a few.

I am hoping that someone on this list works for an aviation company
that uses these parts or parts from a supplier that carries these
parts. Are there any sitting on a shelf somewhere? Can someone
leverage thier suppliers to find them?

Other than final Transport Canada approval of the "as-bilt" drawings,
it's the only thing in the way of setting this done.

Thanks!

Martin


10110010101010110101010101010110101010101010101010 11010101010101010101010101010101010101010101010101 01010101010101010101101010
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sounds familiar... Marc Ramsey[_2_] Soaring 4 February 23rd 08 07:39 PM
Dyess B-1B blows tires on landing image 1832 Tom Callahan Aviation Photos 0 November 12th 06 02:56 PM
Does this look familiar? C J Campbell Piloting 14 September 10th 04 05:55 AM
What's your most familiar route? Ben Jackson Piloting 30 April 19th 04 11:30 AM
Anyone familiar with Whiteman AFB? John A. Weeks III Military Aviation 6 April 3rd 04 07:26 PM


All times are GMT +1. The time now is 08:22 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.