ASA OnTop 8

Hi all,

My ASA OnTop 8 is over-responding to my CH pedal input. The pedal input =
moves the sim plane way more than my input and just a little step on the =
pedals, the plane would immediately yaw and then roll the plane into a =
40 - 50 degree blank angle.=20

Anybody knows how to adjust the input level of the pedals?
=20
Thanks in Advance!

Kevin


p.s. Spent $600 to get the OnTop/IP Trainer bundle and CH Yoke/Pedal; IP =
Trainer still freezes frequently, OnTop 8 took half a dozen e-mails and =
2 weeks of my after work time just to get it connected with my CH Yoke & =
Pedals. The techie at ASA must have given up on me as he no longer =
replies to any of the e-mail anymore.

=20

What type of PC are you running this on? What OS? Is this USB or Gameport
based gear?

-byron

"Kevin" wrote in message
...
Hi all,

My ASA OnTop 8 is over-responding to my CH pedal input. The pedal input
moves the sim plane way more than my input and just a little step on the
pedals, the plane would immediately yaw and then roll the plane into a 40 -
50 degree blank angle.

Anybody knows how to adjust the input level of the pedals?

Thanks in Advance!

Kevin


p.s. Spent $600 to get the OnTop/IP Trainer bundle and CH Yoke/Pedal; IP
Trainer still freezes frequently, OnTop 8 took half a dozen e-mails and 2
weeks of my after work time just to get it connected with my CH Yoke &
Pedals. The techie at ASA must have given up on me as he no longer replies
to any of the e-mail anymore.

Byron,
I downloaded FSUIPC from avsim.com primarily for the excellant calibration
procedures on all axes - it has many other bells & whistles for weather,
etc., but this helped my CH pedals considerably. Didn't totally cure the
problem, but it's liveable. Runs ~$22.
Plus you can tweek things like rudder effectivness for the individual
aircraft cfg file from the default 1 to maybe .9 or .8, which also limits
total rudder swing - but if you have too much now, so what? Easy to put
back if ya don't like it...
Cheers'n beers.
Don

"Byron Miller" wrote in message
...
What type of PC are you running this on? What OS? Is this USB or Gameport
based gear?

-byron

"Kevin" wrote in message
...
Hi all,

My ASA OnTop 8 is over-responding to my CH pedal input. The pedal input
moves the sim plane way more than my input and just a little step on the
pedals, the plane would immediately yaw and then roll the plane into a
40 -
50 degree blank angle.

Anybody knows how to adjust the input level of the pedals?

Thanks in Advance!

Kevin


p.s. Spent $600 to get the OnTop/IP Trainer bundle and CH Yoke/Pedal; IP
Trainer still freezes frequently, OnTop 8 took half a dozen e-mails and 2
weeks of my after work time just to get it connected with my CH Yoke &
Pedals. The techie at ASA must have given up on me as he no longer replies
to any of the e-mail anymore.