A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Propellor pitch ...



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old July 29th 03, 01:57 AM
Bob Noel
external usenet poster
 
Posts: n/a
Default Propellor pitch ...

In article , "N3722A"
wrote:

I have a Sensenich 72CK-0-56 prop on my plane - is the "56" the pitch on
the
prop?


yes.


Also, can one have a prop "re pitched" so to speak to give more of a
climb
performance than cruise? It seems I once read (correct me if I am wrong)
that this number (56) is the pitch and if one can have a prop reworked to
a
lower pitch (like 52) one can get a better climb performance.


I suggest you contact Sensenich about the limits of re-pitching.
I would think that changing the prop pitch would require either
an STC or field approval (if not already covered by the original
type certificate). For example, the STC to install a 160hp engine
in my cherokee 140 also allowed either the original 58 pitch
or a 60 pitch prop.

Good luck.

--
Bob Noel
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 12:21 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.