A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

What do you do about maintenance?



 
 
Thread Tools Display Modes
  #1  
Old July 2nd 06, 01:00 AM posted to rec.aviation.owning
Andrew Gideon
external usenet poster
 
Posts: 516
Default What do you do about maintenance?


Picture an airport where MX services are limited. Perhaps because there's
no real shop at the airport, but maybe just a couple of independents that
work out of their hanger. Or perhaps there are shops but they're
"imperfect" (ie. unwilling to work on anything that's not scheduled two or
more weeks out, low quality work, or one or more other problems I'm sure
we've all experienced).

So what do you do?

For some MX work (ie. annuals, upgrades, avionics work, etc.), one can fly
to a shop that specializes in the airplane (or type of work). But what
about problems that leave the airplane grounded?

Is it just the luck of the draw with an airport, or is there an actual
solution out there?

Thanks...

Andrew

  #2  
Old July 2nd 06, 03:19 AM posted to rec.aviation.owning
Ron Rosenfeld
external usenet poster
 
Posts: 264
Default What do you do about maintenance?

On Sat, 01 Jul 2006 20:00:12 -0400, Andrew Gideon
wrote:


Picture an airport where MX services are limited. Perhaps because there's
no real shop at the airport, but maybe just a couple of independents that
work out of their hanger. Or perhaps there are shops but they're
"imperfect" (ie. unwilling to work on anything that's not scheduled two or
more weeks out, low quality work, or one or more other problems I'm sure
we've all experienced).

So what do you do?

For some MX work (ie. annuals, upgrades, avionics work, etc.), one can fly
to a shop that specializes in the airplane (or type of work). But what
about problems that leave the airplane grounded?

Is it just the luck of the draw with an airport, or is there an actual
solution out there?

Thanks...

Andrew


Andrew,

I am based at an airport with no maintenance. On the few occasions when I
have had my a/c grounded, I call my maintenance facility and a mechanic
comes to me with the necessary equipment.

So far I've been able to describe the problems well enough that only one
trip was necessary.

So the solution is the same as any other airplane problem solution -- green
stuff in copious amounts g.


Ron (EPM) (N5843Q, Mooney M20E) (CP, ASEL, ASES, IA)
  #3  
Old July 2nd 06, 03:38 AM posted to rec.aviation.owning
Stache
external usenet poster
 
Posts: 34
Default What do you do about maintenance?


You are right this is a real problem and will be get worse in the
future. Several of us mechanic were thinking the same thing since
there are hardly any young guys planning to replace us. We have been
kicking around the idea of a co-op of mechanics that have retired and
don't want to work full time, but would enjoy getting out and staying
active (on call). Several mechanics own aircraft and would fly off to
an airport to fix an airplane if requested.

The only problem he will have is communication. However the inter net
may solve that problem. What we need is a list of mechanics by state
and type of work willing to perform. The owner could go to the web
site fine a mechanic contact them by e-mail or phone and work out the
details. This could be an untapped market and benefit both owner and
mechanic.

Just one man's opinion.

Stache

  #4  
Old July 2nd 06, 04:16 AM posted to rec.aviation.owning
Jim Burns
external usenet poster
 
Posts: 259
Default What do you do about maintenance?

First, buy the maintenance manuals and parts manuals for your airplane,
become very familiar with them. The more correct information that you can
give an A&P before he looks at your airplane the easier it will be for him
and the cheaper it will be for you. The internet is a great resource for
parts and supplies, but having the part numbers makes things a lot easier.

Second, network. Where do other people on the airport get their work done?
Start a list of A&Ps in your area. Search the FAA database and compile a
second list of names not found on your first list. Contact some of these
people. Join your appropriate type clubs, groups, and local EAA chapter
They are invaluable resources. An EAA chapter is a great place to meet
retired A&P's that are interested in helping you do things right.

Compile your resources. What pilots/owners have what tools and or
equipment? What are the mechanical abilities and capabilities of the other
owners on the airport?

Talk to as many A&Ps as you can. Are any of them looking for extra part
time work in the evenings or on weekends? Who will let you help? What
about retired A&P's who may let you do the grunt work then sign it off for
you?

Are there any "seasonal" operations on or near your airport that may have
mechanics with spare time in between busy seasons or busy days of the week?
Think about ag operators, freight haulers, small 135 operators looking to
fill in their down times.

Don't forget about the owner approved maintenance list. Locate the periodic
maintenance checklists in the maintenance manual for your airplane. You'll
be able to do many of the listed items yourself.

Remember that an "annual" is an inspection, a local A&P can do any required
work then an AI can pay a visit to do the inspection.

Jim


  #5  
Old July 2nd 06, 06:25 AM posted to rec.aviation.owning
Robert M. Gary
external usenet poster
 
Posts: 2,767
Default What do you do about maintenance?

Been there. It sucks. Basically you've got to find the old A&P guy who
thought he'd retired and convience him to come out to help you on the
ramp when you have a problem. Luckily, the airports that are too small
to have roaming full time A&Ps are also too small to care that you're
working on the ramp.

-Robert
Andrew Gideon wrote:
Picture an airport where MX services are limited. Perhaps because there's
no real shop at the airport, but maybe just a couple of independents that
work out of their hanger. Or perhaps there are shops but they're
"imperfect" (ie. unwilling to work on anything that's not scheduled two or
more weeks out, low quality work, or one or more other problems I'm sure
we've all experienced).


  #6  
Old July 2nd 06, 04:00 PM posted to rec.aviation.owning
Denny
external usenet poster
 
Posts: 562
Default What do you do about maintenance?

I do the majority of my own maintenance... I use a mechanic at a
distant field for the stuff that has to be signed off, or I am
unwilling to do, and for annual, etc... If the bird is ever unflyable
I will use the mechanic on the field, or if he has his nose out of
joint I will have to hire a mechanic to come in... Several ships on the
field don't like the local mechanic and that is what they do
routinely...

denny

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Air Force One Had to Intercept Some Inadvertent Flyers / How? Rick Umali Piloting 29 February 15th 06 05:40 AM
Nearly had my life terminated today Michelle P Piloting 11 September 3rd 05 02:37 AM
Owner's right to maintenance records? jls General Aviation 15 January 24th 05 11:18 PM
Owner's right to maintenance records? jls Owning 0 January 20th 05 01:57 PM
USAF = US Amphetamine Fools RT Military Aviation 104 September 25th 03 03:17 PM


All times are GMT +1. The time now is 10:08 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.