If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Stan Gosnell wrote in message ...
(Snowbird) wrote in om: Our CFI doesn't like pilots he flies with to use hoods. Apparently he had a near-miss involving the blind spot they create. Can't argue with that. Oh, well........... Have you considered a different CFI? How would that help? The blind spot created by the hood would still be there. And frankly, the hoods I've tried allowed waaaaaay too much cheating. Obviously I haven't tried them all, your favorite may be perfect in this regard. That's what mine a old scratched-up safety glasses with an area of the lens taped over, then attacked w/ sandpaper and a dremel tool. That's extreme. :-) Easier to mask the bottoms, & use some black spray paint. Easier for whom? I can attack something w/ sandpaper or even a dremel tool on the porch while I'm watching my daughter. Spray paint requires clearing and masking an area to catch overspray, then clean up afterwards. The "clearing" is non-trivial in any domecile "Mr. Clutter" (aka my husband) inhabits. Then I have to wait several weeks for enough of the solvent to out-gas that I can stand to be in the same closed space with something that's been painted (it's an asthmatic trigger for me). They're still too thick for me, though. The earpieces on my glasses are very thin wire, & anything thicker just doesn't cut it. Concur, hence my interest in mfr a Hood Lamb equivalent for Lightspeeds. Cheers, Sydney |
#2
|
|||
|
|||
|
#4
|
|||
|
|||
On 18 Aug 2003 19:40:43 -0700, (Snowbird)
wrote: Stan Gosnell wrote in message ... My personal device is a flip-up type, which attaches to my glasses the way flip-up clipon sunglasses do. Yeah, I'm really tempted by these, but I prefer to wear contact lenses when flying for better peripheral vision. Our CFI doesn't like pilots he flies with to use hoods. Apparently he had a near-miss involving the blind spot they create. Can't argue with that. I know of one pilot who has made foggles from some wrap-around safety glasses Foggles appear to be nothing more than the inexpensive clear plastic safety glasses that have been sandblasted, or bead blasted on the sides and areas where you want to block vision. Based on that, the equivalent is quite easy to make, or even duplicate. Roger Halstead (K8RI EN73 & ARRL Life Member) www.rogerhalstead.com N833R World's oldest Debonair? (S# CD-2) snip |
#5
|
|||
|
|||
Roger Halstead wrote in
: Foggles appear to be nothing more than the inexpensive clear plastic safety glasses that have been sandblasted, or bead blasted on the sides and areas where you want to block vision. Nope, one more modification - the price is jacked way up. Based on that, the equivalent is quite easy to make, or even duplicate. For a fraction of the price. Anything targeted at aviation & pilots is very expensive, because all those pilots have lots of money. ;-) I never buy anything sold as being for aviation if I can help it. My flight bag is a fishing tackle bag I bought on clearance at KMart. Just about the only thing I own that's sold to pilots is the mike for my headset. I recently had to replace the cord on my headset, & thought I was getting ripped off by the electronics supply place for $20, but if you buy one specifically designed for an aviation headset you'll pay close to $100 for a lower-quality equivalent. -- Regards, Stan |
#6
|
|||
|
|||
On 19 Aug 2003 19:32:12 GMT, Stan Gosnell
wrote: Roger Halstead wrote in : Foggles appear to be nothing more than the inexpensive clear plastic safety glasses that have been sandblasted, or bead blasted on the sides and areas where you want to block vision. Nope, one more modification - the price is jacked way up. I notice that too...Actually a very important modification to the safety glasses. Based on that, the equivalent is quite easy to make, or even duplicate. For a fraction of the price. Anything targeted at aviation & pilots is very expensive, because all those pilots have lots of money. ;-) Not for long:-)) I never buy anything sold as being for aviation if I can help it. My flight bag is a fishing tackle bag I bought on clearance at KMart. Just about the only thing I own that's sold to pilots is the mike for my I use my old briefcase I had at work...before I retired. headset. I recently had to replace the cord on my headset, & thought I was getting ripped off by the electronics supply place for $20, but if you buy one specifically designed for an aviation headset you'll pay close to $100 for a lower-quality equivalent. I'm not sure I paid that much for my first pair of headsets. Course they were Sigtronics passive headsets and that was almost 15 years ago. Roger Halstead (K8RI EN73 & ARRL Life Member) www.rogerhalstead.com N833R World's oldest Debonair? (S# CD-2) |
#7
|
|||
|
|||
Roger Halstead wrote in message . ..
Foggles appear to be nothing more than the inexpensive clear plastic safety glasses that have been sandblasted, or bead blasted on the sides and areas where you want to block vision. Concur. As I said in a previous post, that's exactly what mine are (well, I sanded and used a dremel tool, I didn't bead blast them). Cheers, Sydney |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A question on Airworthiness Inspection | Dave S | Home Built | 1 | August 10th 04 05:07 AM |
Question | Charles S | Home Built | 4 | April 5th 04 09:10 PM |
Poly Dope Question | Michael | Home Built | 3 | January 29th 04 07:10 AM |
Tecumseh Engine Mounting Question | jlauer | Home Built | 7 | November 16th 03 01:51 AM |
Lightspeed -- Was:Oshkosh 2003 Redux | Jack McAdams | Home Built | 8 | August 14th 03 03:19 PM |