SN10b data to PNA?

Looking for advice on how to send data from an ILEC SN10b to a pna device such as an Avier/Gliderguider etc.
Thanks for any help.

Mark

On Sunday, November 10, 2013 12:14:03 PM UTC-5, wrote:
Looking for advice on how to send data from an ILEC SN10b to a pna
device such as an Avier/Gliderguider etc.

Thanks for any help.
Mark

Connect SN10 NMEA output (RS232) to PDA input.
SN10 NMEA output is also connected for example
to FLARM input for task declaration.

Do **NOT** connect PDA output to SN10 !!

Check SN10 option "PDA" to enable output.

NOTE: PDA must use proper RS232 levels or you will have a small fire.

Hope that helps,
Best Regards, Dave "YO electric"

I suggest a professional cable such as available from Craggy Aero he http://www.craggyaero.com/cables_connection_kits.htm . These can connect your GPS - SN10 - PNA. Evan being a fairly proficient engineer, my decision to buy one of these was worth the money many times over. When GPS & PNA things aren't working correctly, it's nice to know it's not your home made cable, so you only have to figure out what menu setting you have wrong. If in doubt, call Richard.

At 00:23 11 November 2013, wrote:
I suggest a professional cable such as available from Craggy Aero he
ht=
tp://www.craggyaero.com/cables_connection_kits.htm . These can connect
your=
GPS - SN10 - PNA. Evan being a fairly proficient engineer, my decision
to
=
buy one of these was worth the money many times over. When GPS & PNA
thing=
s aren't working correctly, it's nice to know it's not your home made
cable=
, so you only have to figure out what menu setting you have wrong. If in
do=
ubt, call Richard.

GliderGuider can supply one, I've just bought one that worked straight out
of the box with my V2 running LK8000. It supplies power to the GG or
whatever, connects the SN10 to the GG, and has a spare RJ12 to connect
Flarm as well.
Dave