A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

New LXNAV V3 variometers in stock now



 
 
Thread Tools Display Modes
  #1  
Old December 24th 12, 07:12 PM posted to rec.aviation.soaring
Paul Remde
external usenet poster
 
Posts: 1,691
Default New LXNAV V3 variometers in stock now

Hi,

The exciting new LXNAV V3 variometers arrived in my stock today. You can
see details and order he
http://www.cumulus-soaring.com/lxnav.htm#LXNAV-V3

Happy Holidays,

Paul Remde
Cumulus Soaring, Inc.

  #2  
Old December 27th 12, 03:01 AM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 7
Default New LXNAV V3 variometers in stock now

Wings and wheels has them for $695.00
  #3  
Old December 27th 12, 04:12 PM posted to rec.aviation.soaring
Richard[_9_]
external usenet poster
 
Posts: 551
Default New LXNAV V3 variometers in stock now

On Wednesday, December 26, 2012 7:01:23 PM UTC-8, wrote:
Wings and wheels has them for $695.00


Craggy Aero

Even Less

Richard
www.craggyaero.com
  #4  
Old December 27th 12, 08:13 PM posted to rec.aviation.soaring
Kimmo Hytoenen
external usenet poster
 
Posts: 92
Default New LXNAV V3 variometers in stock now

LXNAV V3 looks like an interesting device. It seems to have RS232
communication - what data does it send out? Can flight computer
application like XCSoar communicate with it?

  #5  
Old December 27th 12, 09:19 PM posted to rec.aviation.soaring
Richard[_9_]
external usenet poster
 
Posts: 551
Default New LXNAV V3 variometers in stock now

On Thursday, December 27, 2012 12:13:14 PM UTC-8, Kimmo Hytoenen wrote:
LXNAV V3 looks like an interesting device. It seems to have RS232 communication - what data does it send out? Can flight computer application like XCSoar communicate with it?


Kimmo,

The V3 serial interface is used only for firmware update. It cannot output to navigation software, for that you need the V7.

Happy New Year

Richard
www.craggyaero.com
  #6  
Old December 28th 12, 01:29 AM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 7
Default New LXNAV V3 variometers in stock now

On Thursday, December 27, 2012 9:19:01 PM UTC, Richard wrote:
On Thursday, December 27, 2012 12:13:14 PM UTC-8, Kimmo Hytoenen wrote:

LXNAV V3 looks like an interesting device. It seems to have RS232 communication - what data does it send out? Can flight computer application like XCSoar communicate with it?




Kimmo,



The V3 serial interface is used only for firmware update. It cannot output to navigation software, for that you need the V7.



Happy New Year



Richard

www.craggyaero.com


The V3/V7 price difference is interesting. It must be mainly justified by marketing rather than the different electronics?
  #7  
Old December 28th 12, 02:02 PM posted to rec.aviation.soaring
Paul Remde
external usenet poster
 
Posts: 1,691
Default New LXNAV V3 variometers in stock now

The V3/V7 price difference is interesting. It must be mainly justified by
marketing rather than the different electronics?


Hi,

There is a big hardware difference between the V7 and V3. The V7 has pitot
an static inputs and can therefore display push/pull (speed-up/slow-down)
commands. The V3 does not have pitot or static inputs. It can tell you how
fast to fly, but it doesn't know how fast you are flying, so it can't tell
you to speed-up/slow-down. The V3 is a great new idea. It is a Total
Energy vario with audio, with the ability to display the recommended
speed-to-fly based on your glider's polar and the current MacCready setting
and the current lift/sink. It is a lot like having a smart MacCready ring
on a mechanical vario. You can see details he
http://www.cumulus-soaring.com/lxnav.htm#LXNAV-V3

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

  #8  
Old December 30th 12, 08:18 AM posted to rec.aviation.soaring
Echo
external usenet poster
 
Posts: 104
Default New LXNAV V3 variometers in stock now

Can the mechanical needle of the V3 function without electrical input? So, if a total power loss, any vario function left? Thanks,

Jordan
ASW20 E

On Friday, December 28, 2012 8:02:49 AM UTC-6, Paul Remde wrote:
The V3/V7 price difference is interesting. It must be mainly justified by


marketing rather than the different electronics?




Hi,



There is a big hardware difference between the V7 and V3. The V7 has pitot

an static inputs and can therefore display push/pull (speed-up/slow-down)

commands. The V3 does not have pitot or static inputs. It can tell you how

fast to fly, but it doesn't know how fast you are flying, so it can't tell

you to speed-up/slow-down. The V3 is a great new idea. It is a Total

Energy vario with audio, with the ability to display the recommended

speed-to-fly based on your glider's polar and the current MacCready setting

and the current lift/sink. It is a lot like having a smart MacCready ring

on a mechanical vario. You can see details he

http://www.cumulus-soaring.com/lxnav.htm#LXNAV-V3



Best Regards,



Paul Remde

Cumulus Soaring, Inc.


  #9  
Old December 30th 12, 01:26 PM posted to rec.aviation.soaring
Paul Remde
external usenet poster
 
Posts: 1,691
Default New LXNAV V3 variometers in stock now

Hi,

No. The needs is driven by an electrical stepper-motor, so it won't work if
there is no power. However, the V3 can be powered by an small backup
battery or battery pack. It operates on as little as 6V. A battery pack
from Radio Shack that holds 4 to 6 AA batteries would work great as a
backup. A panel mounted switch could be used to switch to the backup
battery pack if the main battery gets too low. Or, you could use 2 main
batteries and switch between them as necessary - that is very commonly done.

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

"Echo" wrote in message
...

Can the mechanical needle of the V3 function without electrical input? So,
if a total power loss, any vario function left? Thanks,

Jordan
ASW20 E

On Friday, December 28, 2012 8:02:49 AM UTC-6, Paul Remde wrote:
The V3/V7 price difference is interesting. It must be mainly justified
by


marketing rather than the different electronics?




Hi,



There is a big hardware difference between the V7 and V3. The V7 has
pitot

an static inputs and can therefore display push/pull (speed-up/slow-down)

commands. The V3 does not have pitot or static inputs. It can tell you
how

fast to fly, but it doesn't know how fast you are flying, so it can't tell

you to speed-up/slow-down. The V3 is a great new idea. It is a Total

Energy vario with audio, with the ability to display the recommended

speed-to-fly based on your glider's polar and the current MacCready
setting

and the current lift/sink. It is a lot like having a smart MacCready ring

on a mechanical vario. You can see details he

http://www.cumulus-soaring.com/lxnav.htm#LXNAV-V3



Best Regards,



Paul Remde

Cumulus Soaring, Inc.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
LXNAV V7 - Reviews? David Reitter Soaring 10 October 21st 14 12:41 AM
Butterfly Variometers - In Stock Paul Remde Soaring 20 September 25th 12 09:47 AM
LXNAV V7 Paul Remde Soaring 2 November 2nd 11 12:31 AM
Gizmo Variometers? Mike C 17 Soaring 1 August 19th 06 07:01 PM
S&V variometers? chris Soaring 7 January 5th 06 06:43 PM


All times are GMT +1. The time now is 03:43 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.