If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Key Assignment and Add On Aircraft Question for FS2K2
Yes, they regularly do, by use of guages. For example, install PM2's
(excellent by the way) Concorde, and you'll find a 'Concorde nose Up' entry. Hope that helps! "Dudley Henriques" wrote in message k.net... I've noticed that in the assignments section for the key assignments, after I install add on aircraft, I'm seeing entries there that don't show up as default assignments for the simulator. For example, I have an avionics on/off, a master battery on/off, and a master battery and gen on/off listed. Here's my question. When you install an add on from say Lago, FSD, or Captain Sim into FS2K2, does their installation change or add assignments to the sim? I am having some issues that I think might be related to my having changed some of these assignments from whatever the default assignment was. For example, I changed avionics to simply an (A). Should you...if you are using add on aircraft in FS2K2, leave the default key assignments alone and simply use whatever is showing, and can changing an assignment in the sim cause issues and conflicts? I'm thinking that to resolve my "issues", I might have to restore to the default key assignments in the sim, then reinstall ALL my add on aircraft, letting the installation assign or add assignments as they go into the sim. Am I on the right track here? Many thanks, Dudley |
#2
|
|||
|
|||
Thanks Angus. I'm having some problems and I think it might have been caused
by my changing some of the key functions to other keys that the defaults. I have an add on Tornado for example, that goes through an automatic start when a specific cockpit switch is clicked. I would assume it's tied to the (E) key in some way, but it also brings avionics and generators on line during the sequence. If I had for example, changed the avionics on/off to another key, I'm thinking this might foul up the sequence and cause some issues with avionics. Just a wild guess here, but I'm trying to learn how these things are actually done. Come to think of it, I've never seen a warning of any kind concerning changing key assignments from default settings...so I might be way off with this theory :-)) DH "Angus Lepper" wrote in message ... Yes, they regularly do, by use of guages. For example, install PM2's (excellent by the way) Concorde, and you'll find a 'Concorde nose Up' entry. Hope that helps! "Dudley Henriques" wrote in message k.net... I've noticed that in the assignments section for the key assignments, after I install add on aircraft, I'm seeing entries there that don't show up as default assignments for the simulator. For example, I have an avionics on/off, a master battery on/off, and a master battery and gen on/off listed. Here's my question. When you install an add on from say Lago, FSD, or Captain Sim into FS2K2, does their installation change or add assignments to the sim? I am having some issues that I think might be related to my having changed some of these assignments from whatever the default assignment was. For example, I changed avionics to simply an (A). Should you...if you are using add on aircraft in FS2K2, leave the default key assignments alone and simply use whatever is showing, and can changing an assignment in the sim cause issues and conflicts? I'm thinking that to resolve my "issues", I might have to restore to the default key assignments in the sim, then reinstall ALL my add on aircraft, letting the installation assign or add assignments as they go into the sim. Am I on the right track here? Many thanks, Dudley |
#3
|
|||
|
|||
"Dudley Henriques" wrote in message ink.net... | Thanks Angus. I'm having some problems and I think it might have been caused | by my changing some of the key functions to other keys that the defaults. I | have an add on Tornado for example, that goes through an automatic start | when a specific cockpit switch is clicked. I would assume it's tied to the | (E) key in some way, but it also brings avionics and generators on line | during the sequence. If I had for example, changed the avionics on/off to | another key, I'm thinking this might foul up the sequence and cause some | issues with avionics. | Just a wild guess here, but I'm trying to learn how these things are | actually done. Come to think of it, I've never seen a warning of any kind | concerning changing key assignments from default settings...so I might be | way off with this theory :-)) The only warning that will appear is when you try to assign a key or key combination that is already being used. The box will tell you what it is currently assigned to. If you confirm the change with "OK" you will lose the original assignment. Martin |
#4
|
|||
|
|||
Meant to add that "Engine Autostart" will always be available so long as you
dont assign "Ctrl+E" to anything else. You can still assign individual items over and above. All my personalised key assignments are on "F" keys. For example F5-F8 are assigned, by default to flaps. Since I have all those controls on my yoke I can re-assign thes with no danger of going into the unknown. One tip....... If you do have a few personalised assignments etc. it is advisable to make a back up copy of your FS2002/04.cfg file. It often seems to go pearshaped within the sim for no apparent reason and saves you starting all over again. Just overwrite with a copy of the backup file. Martin Martin "Dudley Henriques" wrote in message ink.net... | Thanks Angus. I'm having some problems and I think it might have been caused | by my changing some of the key functions to other keys that the defaults. I | have an add on Tornado for example, that goes through an automatic start | when a specific cockpit switch is clicked. I would assume it's tied to the | (E) key in some way, but it also brings avionics and generators on line | during the sequence. If I had for example, changed the avionics on/off to | another key, I'm thinking this might foul up the sequence and cause some | issues with avionics. | Just a wild guess here, but I'm trying to learn how these things are | actually done. Come to think of it, I've never seen a warning of any kind | concerning changing key assignments from default settings...so I might be | way off with this theory :-)) | DH | "Angus Lepper" wrote in message | ... | Yes, they regularly do, by use of guages. For example, install PM2's | (excellent by the way) Concorde, and you'll find a 'Concorde nose Up' | entry. | Hope that helps! | "Dudley Henriques" wrote in message | k.net... | I've noticed that in the assignments section for the key assignments, | after | I install add on aircraft, I'm seeing entries there that don't show up | as | default assignments for the simulator. For example, I have an avionics | on/off, a master battery on/off, and a master battery and gen on/off | listed. | Here's my question. | When you install an add on from say Lago, FSD, or Captain Sim into | FS2K2, | does their installation change or add assignments to the sim? I am | having | some issues that I think might be related to my having changed some of | these | assignments from whatever the default assignment was. For example, I | changed | avionics to simply an (A). Should you...if you are using add on aircraft | in | FS2K2, leave the default key assignments alone and simply use whatever | is | showing, and can changing an assignment in the sim cause issues and | conflicts? | I'm thinking that to resolve my "issues", I might have to restore to the | default key assignments in the sim, then reinstall ALL my add on | aircraft, | letting the installation assign or add assignments as they go into the | sim. | Am I on the right track here? | Many thanks, | Dudley | | | | | | |
#5
|
|||
|
|||
Thanks very much for all your kind info.
D "Handsome" wrote in message ... Meant to add that "Engine Autostart" will always be available so long as you dont assign "Ctrl+E" to anything else. You can still assign individual items over and above. All my personalised key assignments are on "F" keys. For example F5-F8 are assigned, by default to flaps. Since I have all those controls on my yoke I can re-assign thes with no danger of going into the unknown. One tip....... If you do have a few personalised assignments etc. it is advisable to make a back up copy of your FS2002/04.cfg file. It often seems to go pearshaped within the sim for no apparent reason and saves you starting all over again. Just overwrite with a copy of the backup file. Martin Martin "Dudley Henriques" wrote in message ink.net... | Thanks Angus. I'm having some problems and I think it might have been caused | by my changing some of the key functions to other keys that the defaults. I | have an add on Tornado for example, that goes through an automatic start | when a specific cockpit switch is clicked. I would assume it's tied to the | (E) key in some way, but it also brings avionics and generators on line | during the sequence. If I had for example, changed the avionics on/off to | another key, I'm thinking this might foul up the sequence and cause some | issues with avionics. | Just a wild guess here, but I'm trying to learn how these things are | actually done. Come to think of it, I've never seen a warning of any kind | concerning changing key assignments from default settings...so I might be | way off with this theory :-)) | DH | "Angus Lepper" wrote in message | ... | Yes, they regularly do, by use of guages. For example, install PM2's | (excellent by the way) Concorde, and you'll find a 'Concorde nose Up' | entry. | Hope that helps! | "Dudley Henriques" wrote in message | k.net... | I've noticed that in the assignments section for the key assignments, | after | I install add on aircraft, I'm seeing entries there that don't show up | as | default assignments for the simulator. For example, I have an avionics | on/off, a master battery on/off, and a master battery and gen on/off | listed. | Here's my question. | When you install an add on from say Lago, FSD, or Captain Sim into | FS2K2, | does their installation change or add assignments to the sim? I am | having | some issues that I think might be related to my having changed some of | these | assignments from whatever the default assignment was. For example, I | changed | avionics to simply an (A). Should you...if you are using add on aircraft | in | FS2K2, leave the default key assignments alone and simply use whatever | is | showing, and can changing an assignment in the sim cause issues and | conflicts? | I'm thinking that to resolve my "issues", I might have to restore to the | default key assignments in the sim, then reinstall ALL my add on | aircraft, | letting the installation assign or add assignments as they go into the | sim. | Am I on the right track here? | Many thanks, | Dudley | | | | | | |
Thread Tools | |
Display Modes | |
|
|