A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » Aviation Images » Aviation Photos
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Harlow PJC-2



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old January 12th 18, 01:12 PM posted to alt.binaries.pictures.aviation
Miloch
external usenet poster
 
Posts: 24,291
Default Harlow PJC-2

https://en.wikipedia.org/wiki/Harlow_PJC-2

The Harlow PJC-2 was a 1930s American four-seat cabin monoplane, designed by Max
Harlow.

Max Harlow was an aeronautical engineer and instructor at the Pasadena Junior
College. Under his tutelage, the aircraft designated PJC-1 was designed and
built as a class project. The PJC-1 first flew on 14 September 1937 at Alhambra,
California but it crashed during an extended (more than six turn) spin test with
the center of gravity ballasted to the aft limit, as it was going through the
certification process—a problem generally laid at the feet the unusually
rigorous spin test requirement and the government test pilot, who bailed out of
the airplane after the spin "flattened out." The airplane struck the ground,
still in the "flat" (longitudinally level) attitude in a bean field near Mines
Field (now Los Angeles International Airport) with considerable damage; although
repairable, the PJC-1 was never returned to service. PJC students then built a
slightly modified airplane, which limited aileron travel with full aft-stick and
incorporated a slightly larger vertical stabilizer. This became the PJC-2 model,
serial number 1 certified by the FAA on 20 May 1938. It was one of the first, if
not the first, airplane designed and built in the U.S. with a stressed-skin
semi-monocoque structure—a revolutionary design feature for the time. Harlow saw
the potential and formed the Harlow Aircraft Company to build PJC-2 aircraft at
Alhambra Airport. Four aircraft were impressed into United States Army Air
Forces service with the designation UC-80 in 1942, and used by Civil Aeronautics
Administration inspectors after WW II.


Role
Four-seat cabin monoplane

Manufacturer
Harlow Aircraft Company

Designer
Max B. Harlow

First flight
1937

Number built
11

Unit cost

$24,880 in 1938

Variants
Harlow PC-5

The PJC-2 was an all-metal low-wing cantilever monoplane with conventional
low-set tailplane and a retractable tailwheel landing gear. A tandem two-seat
version intended as a military trainer was developed as the Harlow PC-5.

In 1991, 3 PJC-2s were actively flying.

Specifications Harlow PJC-2

General characteristics
Crew: One
Capacity: Three passengers
Length: 23 ft 4 in (7.11 m)
Wingspan: 35 ft 10 in (10.92 m)
Height: 7 ft 8 in (2.34 m)
Wing area: 185 ft2 (17.19 m2)
Empty weight: 1661 lb (753 kg)
Gross weight: 2600 lb (1179 kg)
Powerplant: 1 × Warner Super Scarab SS-50 7-cylinder radial piston engine, 145
hp (108 kW)

Performance
Maximum speed: 160 mph (257 km/h)
Cruise speed: 140 mph (224 km/h)
Range: 490 miles (788 km)
Service ceiling: 15,500 ft (4725 m)




*

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
UK2 DR424 Harlow PC-5A JackMeadenColl.jpg Joseph Testagrose Aviation Photos 1 September 4th 13 08:08 AM
UK2 DR423 Harlow PC-5A JackMeadenColl.jpg Joseph Testagrose Aviation Photos 0 March 31st 12 12:44 PM


All times are GMT +1. The time now is 11:04 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.