If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Thanks Brian Whatcott!!
Took your advice exactly and the spinner came out great...Nearing
completion!!! Thought you'd like to see a pic of the spinner you helped me out with. The pic is very washed out....bad camera settings. Looks much better than pic shows. Thanks again. http://www.mvas.com/fox1.jpg Howard |
#2
|
|||
|
|||
"Pianome" wrote in message news:fliKc.116482$Oq2.79822@attbi_s52...
Took your advice exactly and the spinner came out great...Nearing completion!!! Thought you'd like to see a pic of the spinner you helped me out with. The pic is very washed out....bad camera settings. Looks much better than pic shows. Thanks again. http://www.mvas.com/fox1.jpg Howard Great looking plane! -- Dan D. http://www.ameritech.net/users/ddevillers/start.html |
#3
|
|||
|
|||
"Pianome" wrote in message news:fliKc.116482$Oq2.79822@attbi_s52... Took your advice exactly and the spinner came out great...Nearing completion!!! Thought you'd like to see a pic of the spinner you helped me out with. The pic is very washed out....bad camera settings. Looks much better than pic shows. Thanks again. http://www.mvas.com/fox1.jpg Howard Ah, yeah, I remember now: the barber pole effect. Nice airplane. Nice spinner! Does the spinner have fore and aft bulkheads? Or as Veeduber would say, "Best way to do a barber pole effect on a spinner." |
#4
|
|||
|
|||
Does the spinner have fore and aft bulkheads?
Or as Veeduber would say, "Best way to do a barber pole effect on a spinner." Yes it does, The forward bulkhead is slotted with an "O" ring...nice tight fit. Howard |
Thread Tools | |
Display Modes | |
|
|