A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Rotorcraft
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Mini-500 parts selling on eBay



 
 
Thread Tools Display Modes
  #21  
Old July 23rd 05, 11:14 PM
Beav
external usenet poster
 
Posts: n/a
Default


"Dennis Fetters" wrote in message
...
The OTHER Kevin in San Diego wrote:

He's politely asked that http://tinyurl.com/8ejpq be shared.



That's not the 1st time I've seen something like that from Dennis.
One thing I haven't seen is anythig like that directed towards Rick
Stitt, the guy who "allegedly" ripped off Rinke's turbine conversion
designs and attempted to manufacture and sell them as his own.

Crap like this is PRECISELY why I mentioned to the OP why it might be
a good idea to do some research before considering a Mini 500.



But Kevin, here is the problem. I didn't write the letter refereed to
above. It was a forgery posted in an attempt to make me look bad, and you
blindly believed it.

Isn't it true that people have posted here on the newsgroups pretending to
be me, and later admitted to it?


Maybe that's true Dennis, but none of them ever got your "style" of writing
down. The letter quoted doesn't fall into that category. it's as "Dennis
Fetters" as it's possible to get, so I'd say you DID write it, but don't
like admitting it.


Now, you mentioned above "that's not the first time I've read something
like that from Dennis". So put your money where your mouth is and prove
your statement, post something I did write to back up your comments.


Personally, I couldn't be arsed to trawl through a platefull of Fetter
drool.


--
Beav

Reply to "beavis dot original at ntlworld dot com" (with the obvious
changes)


Dennis Fetters



  #22  
Old July 24th 05, 12:16 AM
Dennis Fetters
external usenet poster
 
Posts: n/a
Default

Beav wrote:

Maybe that's true Dennis, but none of them ever got your "style" of writing
down. The letter quoted doesn't fall into that category. it's as "Dennis
Fetters" as it's possible to get, so I'd say you DID write it, but don't
like admitting it.



As I said, I swore to God I didn't write that letter. Do you think I
would lie to God? It was posted fraudulently by Joe Rinke. You are so
closed minded that you couldn't believe anything else if it jumped up
and bit you in the butt. You believe it only because that is what you
want to believe. Show us where I have ever written anything like that.


Now, you mentioned above "that's not the first time I've read something
like that from Dennis". So put your money where your mouth is and prove
your statement, post something I did write to back up your comments.



Personally, I couldn't be arsed to trawl through a platefull of Fetter
drool.



As for you, what room do you have to talk? Go play with your little toy
RC helicopters, that's your speed. Hell, even my toy helicopter is 300
pounds with a rotor diameter of 16 feet! I'll send you a picture!

Dennis Fetters
  #23  
Old July 24th 05, 05:18 AM
Scratch
external usenet poster
 
Posts: n/a
Default

Dennis Fetters wrote:
Dear Jim,

I tried to email this to you privately, but it returned. So, I'll post
it here as a privet email. Those who read it are reading something not
meant for anyone but Jim.


Riiiight.

Important message, for Jim... only for Jim...

Dear Jim,


Thank you for your post, I'm happy to read what you said, but it will
only cause you problems. These people live by "do not confuse the issues
with the facts, we already made up our minds". They are mostly crippled
with blinders, and unable to comprehend the facts. I only post here in
rebuttal against what these few robot minded people parrot, and then
only for those with open minds and hearts to have an opportunity to at
least read the other side. Then, they can make up their own minds.

It is a burden I bare alone, and no need for you to suffer by trying to


I'm getting all weepy.

say something contrary to what they want all others to believe. If all
happy Mini-500 owners were as brave and forthright as you, and would
stand and fight back, then it would be a victory, but that will never
happen. Thank you for the bit of kindness, but you do not deserve their
wrath.


I need a tissue sniff

Most sincerely,

Dennis Fetter


You spelled your name wrong.
  #24  
Old July 24th 05, 08:34 PM
Dave Jackson
external usenet poster
 
Posts: n/a
Default

B4RT wrote;
So unless you have 1000+ hours or [of] rotorcraft time..


For the homebuilder; is that 1000 hours of flying experience, or 1000 hours
of maintenance experience, or perhaps 1000 hours of experience in
manufacturing and assembling rotorcraft?

It is said that the Sikorsky Sea King requires 7-12 hours of maintenance for
every hour of flying.
http://www.canoe.ca/mb2/messages/cnewsf/994-2.html

Maybe the maintained experience is the most important.for safe flight????
Just a question.


  #25  
Old July 25th 05, 12:26 AM
external usenet poster
 
Posts: n/a
Default

the guy who forged that "privet" latter

I dunno. The letter was so sappy, seems authentic to me.

  #26  
Old July 25th 05, 01:59 AM
Dave Jackson
external usenet poster
 
Posts: n/a
Default

So it's not necessarily PILOTing proficiency.

Now if the pilot had Superman's vision and Einstein's brain, his
'walk-around' would allow his eye's to see inside all of the craft, and his
brain would allow him to understand all he saw.

Just a joke.



"The OTHER Kevin in San Diego" skiddz "AT" adelphia "DOT" net wrote in
message ...
On Sun, 24 Jul 2005 19:34:38 GMT, "Dave Jackson"
wrote:

Maybe the maintained experience is the most important.for safe flight????
Just a question.


The most important part of the flight safety equation is the PILOT.
It's the pilot's responsibility to determine if the aircraft is
actually airworthy.





  #27  
Old July 25th 05, 05:43 PM
Dennis Fetters
external usenet poster
 
Posts: n/a
Default

The OTHER Kevin in San Diego wrote:
On Sat, 23 Jul 2005 21:54:54 GMT, Dennis Fetters
wrote:



But Kevin, here is the problem. I didn't write the letter refereed to
above. It was a forgery posted in an attempt to make me look bad, and
you blindly believed it.



Actually, I didn't, "blindly believe it." Again, playing Devil's
Advocate, just who are we all to believe? "He said, you said".
Somewhere in the middle lies the actual truth.



My apologies for assuming so.


Isn't it true that people have posted here on the newsgroups pretending
to be me, and later admitted to it?



I don't know? Is it?? I've yet to see any evidence of that in this
newsgroup, but having said that, I've only been actively participating
here for about a year..



Yes, it is true. Several people here have posted under my name. For one,
look up some of the postings of Esteban (Steve) Jimenez
) Who posed as me and was exposed.


Now, you mentioned above "that's not the first time I've read something
like that from Dennis". So put your money where your mouth is and prove
your statement, post something I did write to back up your comments.



Had I the inclination to make even the smallest effort to do so, I
would. However, I don't so won't lift a finger. Had I directly
quoted something attributed to you, I'd gladly dig up the source.



Yes, it is much less trouble and easier to discredit someone without
proving it. My arguments exactly.

Again, my apologies for assuming the above, but it was easy to make the
mistake, I'm sure you'll agree.

Dennis Fetters
  #28  
Old July 25th 05, 05:56 PM
Dennis Fetters
external usenet poster
 
Posts: n/a
Default

The OTHER Kevin in San Diego wrote:

On Sat, 23 Jul 2005 23:16:36 GMT, Dennis Fetters


As for you, what room do you have to talk? Go play with your little toy
RC helicopters, that's your speed. Hell, even my toy helicopter is 300
pounds with a rotor diameter of 16 feet! I'll send you a picture!



Descending into insults.. typical.



I rarely do so, and then only when it's factual. There is already some
history with Beavis and his out of line comments.
But, few else here hesitate to insult me. I don't see you standing up to
them. Why? double standards? I hope not.

Dennis Fetters
  #29  
Old July 25th 05, 06:04 PM
Dennis Fetters
external usenet poster
 
Posts: n/a
Default

Dave Jackson wrote:

B4RT wrote;

So unless you have 1000+ hours or [of] rotorcraft time..



For the homebuilder; is that 1000 hours of flying experience, or 1000 hours
of maintenance experience, or perhaps 1000 hours of experience in
manufacturing and assembling rotorcraft?



Dave, from my experience, that sounds about right.

If Kit aircraft had the same laws backing them as certified aircraft,
then people would by law have to build and maintain their aircraft to
factory standards, and in most cases that would vastly reduce the
accident rate.

Sincerely,

Dennis Fetters
  #30  
Old July 25th 05, 06:10 PM
Dennis Fetters
external usenet poster
 
Posts: n/a
Default

The OTHER Kevin in San Diego wrote:
On Sat, 23 Jul 2005 23:16:36 GMT, Dennis Fetters
wrote:



As I said, I swore to God I didn't write that letter. Do you think I
would lie to God? It was posted fraudulently by Joe Rinke. You are so
closed minded that you couldn't believe anything else if it jumped up
and bit you in the butt. You believe it only because that is what you
want to believe. Show us where I have ever written anything like that.



How does swearing to an imaginary deity prove the truth of anything???



Dear Kevin. I am very, very sorry, but in that case you will never
understand. You have to believe what you wish.

I do hope for you the best,

Sincerely,

Dennis Fetters

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Selling on Ebay Jay Honeck Piloting 34 May 28th 04 06:29 PM
Selling my Garmin Pilot III Aviation GPS and MORE on ebay Cecil E. Chapman Products 0 January 29th 04 01:44 AM
Airplane Parts on Ebay Vac Reg Valves, Fuel Floats, O-200 Spider, Fuel Injection Valve Bill Berle Home Built 0 January 26th 04 08:48 AM
Airplane Parts on Ebay Vac Reg Valves, Fuel Floats, O-200 Spider, Fuel Injection Valve Bill Berle Aviation Marketplace 0 January 26th 04 08:48 AM
Airplane Parts on Ebay Vac Reg Valves, Fuel Floats, O-200 Spider, Fuel Injection Valve Bill Berle Owning 0 January 26th 04 08:48 AM


All times are GMT +1. The time now is 08:53 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.