A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

LK8000 map files?



 
 
Thread Tools Display Modes
  #1  
Old May 23rd 17, 02:52 AM posted to rec.aviation.soaring
Michael Opitz
external usenet poster
 
Posts: 318
Default LK8000 map files?

I am anticipating flying the USA Club Class Nationals in Hobbs, NM
at the end of June. I am using an Avier/V2 PNA running both
SeeYou (licensed) and LK8000 programs. I have gone to the world
wide turnpoint exchange to get the contest data points, but I am
looking for where to go to get sectional and other maps, etc in the
proper digital format to download onto my PNA. I prefer to use
LK8000, and I was wondering if someone out there can point me to a
site where I can download the correct map data from?

Thanks,

RO

  #2  
Old May 23rd 17, 04:10 AM posted to rec.aviation.soaring
Ron Gleason
external usenet poster
 
Posts: 483
Default LK8000 map files?

On Monday, 22 May 2017 20:00:12 UTC-6, Michael Opitz wrote:
I am anticipating flying the USA Club Class Nationals in Hobbs, NM
at the end of June. I am using an Avier/V2 PNA running both
SeeYou (licensed) and LK8000 programs. I have gone to the world
wide turnpoint exchange to get the contest data points, but I am
looking for where to go to get sectional and other maps, etc in the
proper digital format to download onto my PNA. I prefer to use
LK8000, and I was wondering if someone out there can point me to a
site where I can download the correct map data from?

Thanks,

RO


If you want sectional maps for SeeYou go to www.soaringdata.info Lynn Alley provides this great resource to us soaring pilots. If you find useful please donate. Plus Lynn is great pilot, instructor and person. He promotes soaring more than anyone I know
  #3  
Old May 23rd 17, 05:09 AM posted to rec.aviation.soaring
Tom Kelley #711
external usenet poster
 
Posts: 306
Default LK8000 map files?

On Monday, May 22, 2017 at 8:00:12 PM UTC-6, Michael Opitz wrote:
I am anticipating flying the USA Club Class Nationals in Hobbs, NM
at the end of June. I am using an Avier/V2 PNA running both
SeeYou (licensed) and LK8000 programs. I have gone to the world
wide turnpoint exchange to get the contest data points, but I am
looking for where to go to get sectional and other maps, etc in the
proper digital format to download onto my PNA. I prefer to use
LK8000, and I was wondering if someone out there can point me to a
site where I can download the correct map data from?

Thanks,

RO


You are aware of the Seeyou mobile wizard(under files on SeeYou) which you can use to generate maps and TP's of a selected area? Then load them into the V2 to use on SeeYou mobile? Anyway, that is what I am doing as I also use a V2 with SeeYou on it.

Best. #711.
  #4  
Old May 23rd 17, 08:54 AM posted to rec.aviation.soaring
David Salmon[_3_]
external usenet poster
 
Posts: 54
Default LK8000 map files?

At 01:52 23 May 2017, Michael Opitz wrote:
I am anticipating flying the USA Club Class Nationals in Hobbs, NM
at the end of June. I am using an Avier/V2 PNA running both
SeeYou (licensed) and LK8000 programs. I have gone to the world
wide turnpoint exchange to get the contest data points, but I am
looking for where to go to get sectional and other maps, etc in the
proper digital format to download onto my PNA. I prefer to use
LK8000, and I was wondering if someone out there can point me to a
site where I can download the correct map data from?

Thanks,

RO


LK8000 maps are downloaded from the LK8000 web site (not the forum). You
need 2 files, Terrain (DEM) and Topology(LKM). Download them, copy and
paste into the Maps folder, then select them in Configuration/System Setup
page 1.
Dave

  #5  
Old May 23rd 17, 12:12 PM posted to rec.aviation.soaring
Michael Opitz
external usenet poster
 
Posts: 318
Default LK8000 map files?

At 07:54 23 May 2017, David Salmon wrote:
At 01:52 23 May 2017, Michael Opitz wrote:
I am anticipating flying the USA Club Class Nationals in Hobbs, NM
at the end of June. I am using an Avier/V2 PNA running both
SeeYou (licensed) and LK8000 programs. I have gone to the world
wide turnpoint exchange to get the contest data points, but I am
looking for where to go to get sectional and other maps, etc in the
proper digital format to download onto my PNA. I prefer to use
LK8000, and I was wondering if someone out there can point me to

a
site where I can download the correct map data from?

Thanks,

RO


LK8000 maps are downloaded from the LK8000 web site (not the

forum). Yo
need 2 files, Terrain (DEM) and Topology(LKM). Download them, copy

an
paste into the Maps folder, then select them in Configuration/System

Setup
page 1.
Dave


Thanks, guys. That should get me going.

RO

  #6  
Old January 23rd 18, 03:30 AM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 1
Default LK8000 map files?

On Tuesday, May 23, 2017 at 2:00:06 AM UTC-6, David Salmon wrote:
At 01:52 23 May 2017, Michael Opitz wrote:
I am anticipating flying the USA Club Class Nationals in Hobbs, NM
at the end of June. I am using an Avier/V2 PNA running both
SeeYou (licensed) and LK8000 programs. I have gone to the world
wide turnpoint exchange to get the contest data points, but I am
looking for where to go to get sectional and other maps, etc in the
proper digital format to download onto my PNA. I prefer to use
LK8000, and I was wondering if someone out there can point me to a
site where I can download the correct map data from?

Thanks,

RO


LK8000 maps are downloaded from the LK8000 web site (not the forum). You
need 2 files, Terrain (DEM) and Topology(LKM). Download them, copy and
paste into the Maps folder, then select them in Configuration/System Setup
page 1.
Dave


That gives the topo and terrain but not airspace!
  #7  
Old January 23rd 18, 08:48 AM posted to rec.aviation.soaring
Kiwi User
external usenet poster
 
Posts: 64
Default LK8000 map files?

On Mon, 22 Jan 2018 19:30:10 -0800, jwyattlines wrote:

On Tuesday, May 23, 2017 at 2:00:06 AM UTC-6, David Salmon wrote:
At 01:52 23 May 2017, Michael Opitz wrote:
I am anticipating flying the USA Club Class Nationals in Hobbs, NM at
the end of June. I am using an Avier/V2 PNA running both SeeYou
(licensed) and LK8000 programs. I have gone to the world wide
turnpoint exchange to get the contest data points, but I am looking
for where to go to get sectional and other maps, etc in the proper
digital format to download onto my PNA. I prefer to use LK8000, and I
was wondering if someone out there can point me to a site where I can
download the correct map data from?

Thanks,

RO


LK8000 maps are downloaded from the LK8000 web site (not the forum).
You need 2 files, Terrain (DEM) and Topology(LKM). Download them, copy
and paste into the Maps folder, then select them in
Configuration/System Setup page 1.
Dave


That gives the topo and terrain but not airspace!


LK8000 uses OpenAir format airspace mapping files.
Get them from the Worldwide Soaring Exchange:

http://soaringweb.org/Airspace

and remember to keep them up to date: in the UK the airspace files are
updated at around a three month interval. Other countries may differ.
Load this into LK8000 as the first airspace file.

Also, be aware that these maps cover the permanent airspace restrictions:
they do not include more temporary NOTAMs. How yo get the latter depends
on where you are. In the UK these can and do change on a daily basis so
you need to check them on the day. Places to check in the ULK a

- the AIS website (contains tools for displaying NOTAMS and their
validity periods

- NOTAMPLOT is an app with a graphical display and also shows the NOTAM
text. Works in conjunction with Avbrief and is helpful for task
planning

- SPINE generally similar to NOTAMPLOT but, in addition, can generate an
OpenAir file containing the current NOTAMs, which can be loaded into
LK8000 as the second airspace file and is displayed as part of the map.

You'll probably want a turnpoint file as well: Again, where you find it
and how often it gets updated depends on where you are. Here in the UK I
use the BGA's TpSelect tool to download and update the turnpoint file,
which changes once or twice a year. LK8000 can use either WinPilot or CUPs
format turnpoint files.


--
Martin | martin at
Gregorie | gregorie dot org
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
XCSoar or LK8000? Dan Marotta Soaring 18 August 11th 16 02:54 PM
Avier with LK8000 Guy B Soaring 5 July 23rd 13 11:04 AM
XCSoar / LK8000 MNLou Soaring 58 July 3rd 13 06:28 PM
Announcing LK8000 v4.0 pcool Soaring 2 February 16th 13 08:20 PM
LK8000 Review [email protected] Soaring 0 March 19th 12 11:52 AM


All times are GMT +1. The time now is 03:42 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.