A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

FS: several Piper parts (long)



 
 
Thread Tools Display Modes
  #1  
Old September 15th 04, 01:09 AM
Jay Masino
external usenet poster
 
Posts: n/a
Default FS: several Piper parts (long)

I'm selling off some of my "stock" of spare parts that don't fit my
Cherokee. I inherited most of them from an airport "old timer" years ago,
and they've been sitting around ever since. I thought I'd give some of
the newsgroup people a chance to make an offer before I Ebay them. I'll be
investigating the worth of these items, so don't low ball "too" much.
Buyers will also be responsible for paying shipping cost. I'll except a
certified/bank check or PayPal (although I've never actually used my
PayPal account, so I don't know how to use it). Nothing will be shipped
until I have the money in my pocket.

One Cherokee rams horn yoke and shaft for the larger diameter
installations. If I don't get a reasonable price for this, I'll keep it
for possible upgrade of my Cherokee.
http://www2.ari.net/jmasino/private/yoke.JPG

The rear section of a dorsal fin. Appears to be brand new. No holes have
been drilled, except for the ones for the built-in captive nuts.
Probably fits Warriors, Archers, later Arrows, etc. The rear is marked
with part number 99619-02
http://www2.ari.net/jmasino/private/rear_dorsal.JPG

Rear spinner backplate. I believe this is probably off of a Warrior 151.
It's marked with part number 587-330. It's also marked $119, but that's
probably a 15 year old price.
http://www2.ari.net/jmasino/private/..._backplate.JPG

Used wingtips for a hershey bar Cherokee. Removed from a 67 140 for Metco
upgrade. Will probably fit other Cherokee models, too.
http://www2.ari.net/jmasino/private/wingtips.JPG

Overhead vent "tube" with mounting tray, louvered vents and control cable.
Probably fits mid-70s Warriors.
http://www2.ari.net/jmasino/private/overhead_vent.JPG

Full carb heat shroud (top and bottom). I believe this is for a mid-70s
Warrior. The top is marked with part number 99568-003, Rev M. The
bottom is marked with part numbers 35302-3F and 35303-003, Rev D. Not
sure which part number is the correct one on the bottom.
http://www2.ari.net/jmasino/private/...at_shroud1.JPG
http://www2.ari.net/jmasino/private/...at_shroud2.JPG

Mufflers that I believe came off my old buddy's 73 Cherokee 180. They
look like they have very little time on them. No visible cracks or
deterioration of the baffles.
http://www2.ari.net/jmasino/private/mufflers1.JPG
http://www2.ari.net/jmasino/private/mufflers2.JPG



--
__!__
Jay and Teresa Masino ___(_)___
http://www2.ari.net/jmasino ! ! !
http://www.oceancityairport.com
http://www.oc-adolfos.com
  #2  
Old September 15th 04, 02:26 AM
Jay Honeck
external usenet poster
 
Posts: n/a
Default

The rear section of a dorsal fin. Appears to be brand new. No holes have
been drilled, except for the ones for the built-in captive nuts.
Probably fits Warriors, Archers, later Arrows, etc. The rear is marked
with part number 99619-02
http://www2.ari.net/jmasino/private/rear_dorsal.JPG


Hmmmm. I wonder if this fits my '74 Pathfinder? (It sure *looks* the
same...)

Mine is cracking badly, and we decided to replace it at the next annual.

Any idea how I can track down that part number? (I'm heading off to Reno in
about 10 hours, so I prolly won't be around to answer. But if you can't
sell it, set it aside for me and I'll catch you when I get back...)
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"


  #3  
Old September 15th 04, 03:20 AM
Bob Noel
external usenet poster
 
Posts: n/a
Default

In article YSM1d.178387$9d6.81094@attbi_s54, "Jay Honeck"
wrote:

The rear section of a dorsal fin. Appears to be brand new. No holes
have
been drilled, except for the ones for the built-in captive nuts.
Probably fits Warriors, Archers, later Arrows, etc. The rear is marked
with part number 99619-02
http://www2.ari.net/jmasino/private/rear_dorsal.JPG


Hmmmm. I wonder if this fits my '74 Pathfinder? (It sure *looks* the
same...)

Mine is cracking badly, and we decided to replace it at the next annual.

Any idea how I can track down that part number? (I'm heading off to Reno
in
about 10 hours, so I prolly won't be around to answer. But if you can't
sell it, set it aside for me and I'll catch you when I get back...)



my (out-of-date?) parts list shows 99619-02 to be applicable
(among others) to pa-28-235 with serial numbers 28-721001 and up.

--
Bob Noel
Seen on Kerry's campaign airplane: "the real deal"
oh yeah baby.
  #4  
Old September 17th 04, 01:01 AM
Rutger
external usenet poster
 
Posts: n/a
Default

Bob Noel wrote in message ...
In article YSM1d.178387$9d6.81094@attbi_s54, "Jay Honeck"
wrote:

The rear section of a dorsal fin. Appears to be brand new. No holes
have
been drilled, except for the ones for the built-in captive nuts.
Probably fits Warriors, Archers, later Arrows, etc. The rear is marked
with part number 99619-02
http://www2.ari.net/jmasino/private/rear_dorsal.JPG


Hmmmm. I wonder if this fits my '74 Pathfinder? (It sure *looks* the
same...)

Mine is cracking badly, and we decided to replace it at the next annual.

Any idea how I can track down that part number? (I'm heading off to Reno
in
about 10 hours, so I prolly won't be around to answer. But if you can't
sell it, set it aside for me and I'll catch you when I get back...)



my (out-of-date?) parts list shows 99619-02 to be applicable
(among others) to pa-28-235 with serial numbers 28-721001 and up.


N-number : N56993
Aircraft Serial Number : 28-7410040
Aircraft Manufacturer : PIPER
Model : PA-28-235
Engine Manufacturer : LYCOMING
Model : O&VO-360 SER
Aircraft Year : 1973
Owner Name : INNOVATIVE DISTRIBUTION SYSTEMS INC
Owner Address : 203 FRIENDSHIP ST
IOWA CITY, IA, 52245-3914
Type of Owner : Corporation
Registration Date : 18-Apr-2002
Airworthiness Certificate Type : Standard
Approved Operations : Normal


Looks like the part number qualifies for Jay's plane.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FA: Piper J3 Cub Parts BFC Aviation Marketplace 0 September 24th 04 03:20 PM
FS: several Piper parts (long) Jay Masino Aviation Marketplace 0 September 15th 04 01:09 AM
Source of Piper Parts Mike Noel Owning 2 June 25th 04 09:04 PM
Piper cub J3 parts needed Mathieu Dewavrin Home Built 0 May 8th 04 09:33 AM
The Piper Cubs That Weren't Veeduber Home Built 5 August 28th 03 04:38 AM


All times are GMT +1. The time now is 08:12 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.