A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Simulators
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

CfP: 3rd International Workshop on Model-driven Approaches forSimulation Engineering (Mod4Sim13) part of the Symposium on Theory ofModeling and Simulation SCS SpringSim 2013)



 
 
Thread Tools Display Modes
  #1  
Old September 13th 12, 11:25 PM posted to rec.aviation.simulators
daniele
external usenet poster
 
Posts: 2
Default CfP: 3rd International Workshop on Model-driven Approaches forSimulation Engineering (Mod4Sim13) part of the Symposium on Theory ofModeling and Simulation SCS SpringSim 2013)

################################################## ###############

CALL FOR PAPERS

3rd International Workshop on
Model-driven Approaches for Simulation Engineering
part of the Symposium on Theory of Modeling and Simulation
(SCS SpringSim 2013)

################################################## ###############

April 7-10, 2013, San Diego, CA (USA)
http://www.sel.uniroma2.it/Mod4Sim13

################################################## ###############
# Papers Due: *** November 1, 2012 ***
# Accepted papers will be published in the conference proceedings
# and archived in the ACM Digital Library.
################################################## ###############

The workshop aims to bring together experts in model-based, model-driven and software engineering with experts in simulation methods and simulation practitioners, with the objective to advance the state of the art in model-driven simulation engineering.

Model-driven engineering approaches provide considerable advantages to software systems engineering activities through the provision of consistent and coherent models at different abstraction levels. As these models are in a machine readable form, model-driven engineering approaches can also support the exploitation of computing capabilities for model reuse, programming code generation, and model checking, for example.

The definition of a simulation model, its software implementation and its execution platform form what is known as simulation engineering. As simulation systems are mainly based on software, these systems can similarly benefit from model-driven approaches to support automatic software generation, enhance software quality, and reduce costs, development effort and time-to-market.

Similarly to systems and software engineering, simulation engineering can exploit the capabilities of model-driven approaches by increasing the abstraction level in simulation model specifications and by automating the derivation of simulator code. Further advantages can be gained by using modeling languages, such as UML and SysML – but not exclusively those. For example, modeling languages can be used for descriptive modeling (to describe the system to be simulated), for analytical modeling (to specify analytically the simulation of the same system), and for implementation modeling (to define the respective simulator).

A partial list of topics of interest includes:

* model-driven simulation engineering processes
* requirements modeling for simulation
* domain specific languages for modeling and simulation
* model transformations for simulation model building
* model transformations for simulation model implementation
* model-driven engineering of distributed simulation systems
* relationship between metamodeling standards (e.g., MOF, Ecore) and distributed simulation standards (e.g., HLA, DIS)
* metamodels for simulation reuse and interoperability
* model-driven technologies for different simulation paradigms (discrete event simulation, multi-agent simulation, sketch-based * simulation, etc.)
* model-driven methods and tools for performance engineering of simulation systems
* simulation tools for model-driven software performance engineering
* model-driven technologies for simulation verification and validation
* model-driven technologies for data collection and analysis
* model-driven technologies for simulation visualization
* Executable UML
* Executable Architectures
* SysML / Modelica integration
* Simulation Model Portability and reuse
* model-based systems verification and validation
* simulation for model-based systems engineering

To stimulate creativity, however, the workshop maintains a wider scope and welcomes contributions offering original perspectives on model-driven engineering of simulation systems.

+++++++++++++++++++++++++++++++++++
On-Line Submissions and Publication
+++++++++++++++++++++++++++++++++++

We invite paper submissions in three forms:

1. Full paper (max 8 pages), describing innovative research results. These papers are eligible for the best paper award and may be invited for an extended version in a special issue of the SCS SIMULATION journal.
2. Work-in-progress paper (max 6 pages), describing novel research ideas and promising work that have not yet been fully evaluated.
3. Short paper (max 6 pages), describing industrial and hands-on experience on any relevant area (i.e. military, government, space, etc.).

All the papers must be submitted through the SCS conference management systems (http://www.softconf.com/scs/DEVS13/) and select the Mod4Sim track. The submissions must be in PDF format and conform to the SCS conference template (Word template is available at http://www.scs.org/upload/documents/...RDTemplate.doc , guidelines are available at http://www.scs.org/PDFs/formattingkit.pdf). All the submitted papers must be original and not submitted else where. Submitted papers will be peer reviewed with respect to their quality, originality and relevance. The authors of the accepted papers must register in advance for inclusion of their paper in the conference proceedings. Authors of accepted papers will be invited to update their papers basing on the reviews, before providing the camera ready.

All accepted papers will be included in the conference proceedings and archived in both the ACM Digital Library. However, **only** accepted **full papers** will be printed in hard copy.

Authors may contact the organizers for expression of interest and content appropriateness at any time.

+++++++++++++++
Important Dates
+++++++++++++++

* Submission Deadline: November 1, 2012
* Decision to paper authors: January 10, 2013
* Camera ready due: February 5, 2013
* Conference dates: April 7-10, 2013

++++++++++++++++++++
Organizing Committee
++++++++++++++++++++

* Andrea D'Ambrogio - University of Rome TorVergata, Italy
* Daniele Gianni - European Space Agency, The Netherlands

+++++++++++++++++
Program Committee
+++++++++++++++++

* Steffen Becker - University of Paderborn, Germany
* Paolo Bocciarelli - University of Rome TorVergata, Italy
* David Chen - Univeristy of Bordeaux I, France
* Cristian Englert - Serco, The Netherlands
* Huascar Espinoza - European Software Institute and Tecnalia, Spain
* Paul A. Fishwick - University of Florida, USA
* Carlos Juiz - University of Balearic Islands, Spain
* Cristiano Leorato - Rhea, The Netherlands
* Steve McKeever - University of Oxford, UK
* Halit Oguztüzün - Middle East Technical University, Turkey
* Andreas Tolk - Old Dominion University, USA
* Hans Vangheluwe - University of Antwerp, Belgium and McGill University, Canada
* Anthony Walsh - European Space Agency, Germany
* Heming Zhang - Tsinghua University, China


*** Contact Information ***
Andrea D'Ambrogio and Daniele Gianni (workshop co-chairs)
Emails: and
Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
japanese stealth fighter jet first flight in 2013 Timur Naval Aviation 8 December 2nd 09 04:27 PM
Russian Air Force may receive fifth-generation fighter in 2013 Mike[_7_] Naval Aviation 12 July 18th 08 01:15 PM
Battery-Driven Tanis Marco Leon Piloting 30 February 4th 07 11:39 AM
Pump driven prop???? Montblack Home Built 5 May 19th 06 11:21 PM
Engineering Workshop practice 1940 FA Susie Aviation Marketplace 0 April 21st 05 09:24 PM


All times are GMT +1. The time now is 07:28 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ©2004-2017 AviationBanter.
The comments are property of their posters.