A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Simulators
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

CfP 4th IEEE Track on Collaborative Modeling and Simulation (Comets2014) in WETICE 2014



 
 
Thread Tools Display Modes
  #1  
Old January 12th 14, 09:21 PM posted to rec.aviation.simulators
daniele
external usenet poster
 
Posts: 2
Default CfP 4th IEEE Track on Collaborative Modeling and Simulation (Comets2014) in WETICE 2014

(Please accept our apologies if you receive multiple copies of this
message)

################################################## ###############
IEEE WETICE 2014
4th IEEE Track on Collaborative Modeling and Simulation
(Comets 2014)

in cooperation with
INCOSE Italia (to be confirmed)
MIMOS (Italian Association for M&S)

CALL FOR PAPERS

################################################## ###############

June 23-25, 2014, Parma (Italy)
http://www.sel.uniroma2.it/comets14

################################################## ###############
# Papers Due: March 7, 2014
# Accepted papers will be published in the conference proceedings
# by the IEEE Computer Society Press and indexed by EI.
################################################## ###############

Modeling and Simulation (M&S) is increasingly becoming a central
activity in the design of new systems and in the analysis of
existing systems because it enables designers and researchers to
investigate systems behavior through virtual representations. For
this reason, M&S is gaining a primary role in many industrial and
research fields, such as space, critical infrastructures,
manufacturing, emergency management, biomedical systems and
sustainable future. However, as the complexity of the
investigated systems increases and the types of investigations
widens, the cost of M&S activities increases for the more
complex models and for the communications among a wider number and
variety of M&S stakeholders (e.g., sub-domain experts, simulator
users, simulator engineers, and final system users). To address
the increasing costs of M&S activities, collaborative
technologies must be introduced to support these activities by
fostering the sharing and reuse of models, by facilitating the
communications among M&S stakeholders, and more generally by
integrating processes, tools and platforms.

Aside from seeking applications of collaborative technologies to
M&S activities, the track seeks innovative contributions that
deal with the application of M&S practices in the field of
collaborative engineering platforms. These platforms are continuously
becoming more complex, and therefore their design requires
systematic approaches to meet the required quality of
collaboration. This is important for two reasons: to reduce
rework activities on the actual collaborative environment, and to
maximize the productivity and the quality of the process the
collaborative environment supports. M&S offers the methodologies
and tools for such investigations and therefore it can be used to
improve the quality of collaborative environments.

A non-exhaustive list of topics of interest includes:

* collaborative requirements modeling
* collaborative environments for M&S
* collaborative Systems of Systems M&S
* business proces modeling for collaborative environments
* agent-based M&S
* collaborative distributed simulation
* collaborative component-based M&S
* net-centric M&S
* web-based M&S
* model sharing and reuse
* model building and evaluation
* modeling and simulation of business processes
* modeling for collaboration
* simulation-based performance analysis of collaborative engineering platforms
* model-driven approaches for collaborative engineering
* domain specific languages for collaborative M&S
* databases and repositories for M&S
* distributed virtual environments
* virtual research environment for M&S
* collaborative DEVS M&S
* multi-method M&S

To stimulate creativity, however, the track maintains a wider
scope and invites interested researchers to present contributions
that offer original perspectives on collaboration and M&S.

+++++++++++++++++++++++++++++++++++
On-Line Submissions and Publication
+++++++++++++++++++++++++++++++++++

CoMetS'14 intends to bring together researchers and practitioners
to discuss key issues, approaches, open problems, innovative
applications and trends in the track research area.

This year, we will accept submissions in two forms:

(1) papers
(2) poster and industrial presentations

(1) Papers should contain original contributions not published or
submitted elsewhere. Papers up to six pages (including figures,
tables and references) can be submitted. Papers should follow the
IEEE format, which is single spaced, two columns, 10 pt
Times/Roman font. All submissions should be electronic (in PDF)
and will be peer-reviewed by at least three program committee
members.

Accepted full papers will be included in the proceedings and
published by the IEEE Computer Society Press (IEEE approval pending).
Please note that at least one author for each accepted paper should
register to attend WETICE 2014 (http://www.wetice.org) to have the
paper published in the proceedings.

(2) Posters should describe a practical, on-the-field, experience in
any domain area using collaborative M&S. The poster submission
requires the submission of an abstract for evaluation from the
organizers. Accepted abstract must be followed by the submission of
a poster which will be displayed at conference time.
With the poster submission, a short (15 minutes) slot might be
allocated for oral presentation illustrating the industrial case.
The presentation may also include a live demo, but it should not
include commercial details.

Interested authors and participants may contact the organizers for expression of interests and content

appropriateness at any time.

Papers and posters can be submitted in PDF format at the conference submission site

(https://www.easychair.org/conferences/?conf=wetice2014), by selecting the CoMetS track.

Please feel free to contact the track chairs , )
if you experience problems with the EasyChair Web site.

+++++++++++++++
Important Dates
+++++++++++++++

* Submission Deadline: March 7, 2014
* Notification to authors: March 28, 2014
* Camera Ready to IEEE: April 11, 2014
* Conference date: June 23 - June 24, 2014

+++++++++++++++++
Program co-chairs
+++++++++++++++++

Andrea D'Ambrogio, University of Roma TorVergata, Italy
Daniele Gianni, Guglielmo Marconi University, Italy
Joachim Fuchs, European Space Agency, The Netherlands
Giuseppe Iazeolla, Guglielmo Marconi University, Italy

+++++++++++++++++
Program Committee
+++++++++++++++++

Paolo Bocciarelli, University of Roma TorVergata, Italy
Alain Kerbrat, CollESys - AFIS, France
Cristiano Leorato, Rhea, The Netherlands
Steve McKeever, Uppsala University, Sweden
David Nickerson, Auckland Bioengineering Institute, NZ
Wolfgang Prinz, Fraunhofer FIT and RWTH Aachen, Germany
Josť L. Risco-Martin, Universidad Complutense de Madrid, Spain
Volker Schaus, DLR, Germany
Sara Tucci, CEA/List, France
Gabriel Wainer, Carleton University, Canada
Quirien Wijnand, European Space Agency, The Netherlands
Justyna Zander, Harvard University, USA, and Fraunhofer Institute FOKUS, Germany
Gregory Zacharewicz, University of Bordeaux, France
Heming Zhang, Tsinghua University, China

*** Contact Information ***
Andrea D'Ambrogio (track co-chair)
Email:

Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic Soaring Animation IEEE - ASH25 w/ Albatross Pilot JohnDeRosa Soaring 17 November 14th 13 03:59 PM
Modeling effects of flying through rain Dr Smith Simulators 1 September 16th 08 08:46 PM
Find out about: airplanes, jets, aircrafts, airports,construction,modeling, saftety in planes, Flying Lessons ... [email protected] Aviation Marketplace 0 January 14th 08 05:25 PM
Find out about: airplanes, jets, aircrafts, airports,construction,modeling, saftety in planes, Flying Lessons ... [email protected] Instrument Flight Rules 0 January 14th 08 05:25 PM
Buffet modeling in FS2004 Joseph Brown Simulators 4 September 23rd 03 10:21 PM


All times are GMT +1. The time now is 06:51 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ©2004-2017 AviationBanter.
The comments are property of their posters.