A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

FREE - Homebuilt project - Pazmany PL1



 
 
Thread Tools Display Modes
  #1  
Old June 22nd 07, 05:03 AM posted to rec.aviation.homebuilt
Eugene Wendland
external usenet poster
 
Posts: 1
Default FREE - Homebuilt project - Pazmany PL1

Owner of a Pazmany Pl-1 project is about to lose hangar and doesn't want all
the hard work that went into the plane go to a recycler. This Pl-1 was once
airworthy and had 100TT.

Wing is removed from fuselage and control surfaces are removed from fuse and
wing. All parts present for a proper rebuild. Includes brand new Plexiglas
canopy. Engine not included, but a complete yellow-tagged 290-D (ready for
rebuild) is also for sale separately.

PLEASE, not tire kickers! He's serious and only contact him if you're
serious.

Contact Gene Ragan at:

Located in California, south of San Jose.

Can qualify for LSA

Links:
http://www.pazmany.com/
http://www.pazmany.com/planes/planes1_pl1.html
Flight characteristics
http://home.cogeco.ca/~pl2/paz1.html
http://home.cogeco.ca/~pl2/paz.html



  #2  
Old June 22nd 07, 04:06 PM posted to rec.aviation.homebuilt
Orval Fairbairn
external usenet poster
 
Posts: 824
Default FREE - Homebuilt project - Pazmany PL1

In article ,
"Eugene Wendland" wrote:

Owner of a Pazmany Pl-1 project is about to lose hangar and doesn't want all
the hard work that went into the plane go to a recycler. This Pl-1 was once
airworthy and had 100TT.

Wing is removed from fuselage and control surfaces are removed from fuse and
wing. All parts present for a proper rebuild. Includes brand new Plexiglas
canopy. Engine not included, but a complete yellow-tagged 290-D (ready for
rebuild) is also for sale separately.

PLEASE, not tire kickers! He's serious and only contact him if you're
serious.

Contact Gene Ragan at:

Located in California, south of San Jose.

Can qualify for LSA

Links:
http://www.pazmany.com/
http://www.pazmany.com/planes/planes1_pl1.html
Flight characteristics
http://home.cogeco.ca/~pl2/paz1.html
http://home.cogeco.ca/~pl2/paz.html


Have you contacted EAA Chapters 62 and 290? How about the gang at
Frazier Lake? Where is the hangar?
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Talon Homebuilt Aircraft Project For Sale spar Home Built 1 December 8th 04 08:46 AM
Talon Homebuilt Aircraft Project For Sale spar Aviation Marketplace 1 December 8th 04 08:46 AM
Talon Homebuilt Aircraft Project For Sale spar General Aviation 1 December 8th 04 08:46 AM
Talon Homebuilt Aircraft Project For Sale spar Restoration 1 December 8th 04 08:46 AM
Looking for good brake masters for homebuilt project. clare @ snyder.on .ca Home Built 3 March 28th 04 08:11 PM


All times are GMT +1. The time now is 03:58 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.